YOKE 9P9182 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01238674
Illustration 2 g01238675
Position plate assembly (9) with instrument panel assembly (3) and install bolts (10).
Illustration 3 g01238672
Illustration 4 g01238673
Position harness assemblies (8). Tighten bolts (7) to a torque of 2.25 .25 N m (19 2 lb in). Close access door (6).
Illustration 5 g01238671
Illustration 6 g01238670
Connect harness assemblies (4) and (5).
Illustration 7 g01238668
Illustration 8 g01238669
Position panel assembly (3). Install screws (1) and (2).