AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N1834 GOVERNOR AND FUEL INJECTION PUMP - Part 4 of 4 Part of Governor and Fuel Injection Pump shown on Pages 43 and 49 225


FUEL SYSTEM
GOVERNOR GP
FILTER GP-FUEL
PUMP GP-FUEL PRIMING
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
ALTERNATOR GP-CHARGING
STARTING MOTOR GP
ALTERNATOR GP-CHARGING
BATTERY GP

EXCAVATOR 225 EXCAVATOR 20S
 225 EXCAVATOR 20S00001-UP (MACHINE) ZEBP0543 225 20S   (1977)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0286 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0249 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP
6N-2477 GOVERNOR AND FUEL INJECTION PUMP
 

#ZEBP05430070
 

4N-1834: GOV & FUEL INJ PUMP GP

4N1834 GOVERNOR AND FUEL INJECTION PUMP - Part 4 of 4
Part of Governor and Fuel Injection Pump shown on Pages 43 and 49
c154512 ZEBP0543
4N1834 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 4N-0610 [1] DIAPHRAGM  
5. 4N-0611 [1] PLUNGER  
6. 3S-4818 [1] SPRING  
7. 4N-0613 [2] PLATE  
8. 4N-0605 [1] SPRING  
9. 4N-0687 [1] COVER ASSEM.  
    (Includes)
10. 4N-2786 [1] SEAL  
11. 4N-1767 [1] VALVE  
12. 0S-1616 [4] BOLT  
13. 4N-0402 [1] GASKET  
14. 9S-8601 [1] PIN  
 

#ZEBP05430071
 

6N-2476: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
FIELD INSTALLATION
ZEBP05430071 ZEBP0543
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-2477 Y [1] GOVERNOR AND FUEL INJECTION PUMP  
  2H-3934 [1] SEAL  
  6L-5773 [1] GASKET  
  8L-8601 [6] SPACER .002" (0.05 mm)  
  9L-3625 [1] TORQUE SPRING .022" (0.55 mm)  
  9L-3626 [1] SPACER .016" (0.41 mm)  
  9L-5176 [1] TORQUE SPRING .024" (0.61 mm)  
  9L-6483 [1] TORQUE SPRING .020" (0.52 mm)  
  9L-7235 [3] SHIM .039" (0.99 mm)  
  9L-9347 [2] SHIM .020" (0.52 mm)  
  5M-6214 [1] PLUG  
  4N-0049 [1] GASKET  
  4N-0159 [1] GASKET  
  4N-0402 [1] GASKET  
  4N-0508 [1] GASKET  
  4N-0594 [1] GASKET  
  4N-4227 [1] GOVERNOR SPRING 1.94" (49.18 mm)  
  4N-4228 [1] GOVERNOR SPRING 1.93" (48.96 mm)  
  4N-7777 [3] SPACER .010" (0.25 mm)  
  4N-9056 [1] GASKET  
  4N-9098 [1] SPACER .200" (5.08 mm)  
  4N-9337 [1] GASKET  
  6N-2504 [1] SPACER .005" (0.12 mm)  
  6N-2843 [1] GASKET  
  1P-0436 [1] GASKET  
  1P-6453 [1] STOP BAR .250" (6.35 mm)  
  2P-0726 [1] SPRING  
  [1] FILM  
  9S-8597 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#ZEBP05430072
 

6N-2477: GOVERNOR AND FUEL INJECTION PUMP

6N2477 GOVERNOR AND FUEL INJECTION PUMP
Part of 6N2476 Governor and Fuel Injection Pump Group shown on Page 48. Governor and
Fuel Injection Pump and Torque Control parts are shown on Pages 44 and 42
sp304 ZEBP0543
6N2477 GOVERNOR AND FUEL INJECTION PUMP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT 1 in. (2.54 cm) long  
  8S-4710 [2] BOLT 4 in. (10.16 cm) long  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
6. Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
8. 4N-9338 [1] COVER  
  4N-9056 [1] GASKET  
9. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4366 [1] SPRING  
13. Y [1] CONTROL GROUP  
    (Separate Illustration)
14. 4N-0443 [1] PIN  
15. 4N-8179 [1] PIN  
16. 4N-0444 [2] SPACER  
17. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#ZEBP05430073
 

2P-0975: FILTER GP-FUEL

2P975 FUEL FILTER
c200806 ZEBP0543
2P0975 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-7108 [1] BLOCK  
2. 2P-3209 [1] BOLT  
3. 2P-3200 [2] BOLT  
4. 4N-5151 [1] SUPPORT  
5. 2P-3205 [1] BOLT  
  2B-0941 [1] SPACER  
6. 5M-2894 [2] WASHER  
7. 2P-3201 [1] BOLT  
8. 1P-2299 [1] FILTER ASSEM.  
9. 4N-3302 [1] BASE ASSEM.  
 

#ZEBP05430074
 

4N-3287: PUMP GP-FUEL PRIMING

4N3287 FUEL PRIMING PUMP
c119981 ZEBP0543
4N3287 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [1] GASKET  
2. 4B-3388 [1] BOLT (5/16-18X1.125IN)LG  
    -OR-
  1B-7182 C [1] BOLT (5/16-18X1.25IN)LG  
  9M-1974 C [1] WASHER (.313IN)DIA  
3. 0S-1616 [1] BOLT (1/4-20X1IN)LG  
    -OR-
  9F-6580 C [1] BOLT (1/4-20X1.125IN)LG  
  5P-0537 C [1] WASHER (.25IN)DIA  
4. 4N-2511 [1] PUMP AS-FUEL PRIMING  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP05430075
 

2Y-1921: STARTING MOTOR GP-ELECTRIC

2Y1921 STARTING ELECTRIC MOTOR
2Y1920 Motor Parts are shown on Page 52
sp217 ZEBP0543
2Y1921 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-7869 [1] GASKET  
2. 2Y-1920 Y [1] MOTOR ASSEM.  
    (Separate Illustration)
3. 3B-4510 [3] LOCKWASHER  
4. 8S-2332 [3] BOLT  
5. 2Y-2238 [1] WIRE ASSEMBLY  
  2L-8052 [2] TERMINAL  
  4S-8784 H [4] WIRE  
  H   ORDER BY THE DECIMETRE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP05430076
 

2Y-2936: ALTERNATOR GP-CHARGING

2Y2936 ALTERNATOR GROUP - 24 Volt, 17 Ampere
2Y2940 Alternator Assembly parts are shown on Page 53
c13424p ZEBP0543
2Y2936 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-2940 Y [ 1] ALTERNATOR GROUP  
    (Separate Illustration)
2. 2Y-2931 [ 1] SUPPORT  
3. 1A-5964 [ 1] BOLT  
4. 3B-4506 [ 3] LOCKWASHER  
5. 1D-4719 [ 1] NUT  
6. 3B-4508 [ 1] LOCKWASHER  
7. 1A-5822 [ 1] BOLT  
8. 0S-1571 [ 2] BOLT  
    Separate Illustration
 

#ZEBP05430077
 

2Y-1920: STARTING MOTOR GP-ELECTRIC

2Y1920 STARTING MOTOR ASSEMBLY
Part of 2Y1921 Starting Motor shown on Page 51
sp24 ZEBP0543
2Y1920 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#ZEBP05430078
 

2Y-2940: ALTERNATOR GROUP

2Y2940 ALTERNATOR GROUP - 28 Volts - 17 Amp.
2Y2936 Alternator parts are shown on Page 51
c920578 ZEBP0543
2Y2940 ALTERNATOR GROUP Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-3316 [1] COVER ASSEM.  
  2Y-3338 [1] COVER  
  2Y-3330 [1] BREATHER  
  2Y-3336 [1] RECTIFIER ASSEM.  
  2Y-3331 [3] DIODE (Negative)  
  2Y-3335 [1] BREATHER  
2. 2Y-3317 [1] STATOR  
3. 2Y-3318 [1] DISC  
4. 2Y-3319 [1] FAN  
5. 2Y-3321 [1] BEARING  
6. 2Y-3322 [1] ROTOR  
7. 2Y-3323 [1] COVER ASSEM.  
8. 2Y-3324 [1] BEARING  
9. 2Y-3337 [1] PULLEY  
10. 2Y-3325 [4] SCREW  
11. 3B-4502 [4] LOCKWASHER  
12. 2Y-3326 [4] WASHER  
13. 2Y-3329 [1] KEY  
14. 2Y-3344 [1] LOCKWASHER  
15. 2Y-3362 [1] NUT  
16. 2Y-3392 [1] CAPACITOR ASSEM.  
    THE FOLLOWING SERVICE REPAIR KITS ARE AVAILABLE:
  2Y-3327 [1] ROTOR KIT  
  2Y-3328 [1] BRUSH AND SPRING KIT  
  2Y-3436 [1] SCREW KIT (D+)  
  2Y-3333 [1] SCREW KIT (B+)  
  2Y-3334 [1] SCREW KIT (D-)  
  2Y-3437 [1] SCREW KIT (DF)  
  2Y-3438 [1] SCREW KIT RECTIFIER MTG  
 

#ZEBP05430079
 

2Y-2783: BATTERY AND WIRING

2y2783 BATTERY AND WIRING - 24 Volt - Part 1 of 2
7H7290 Disconnect Switch shown on Page 59
See Page 56 for Wiring Diagram
sp307 ZEBP0543
2Y2783 BATTERY AND WIRING Parts scheme
  For full view, you need register

Parts for your 225 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-3283 [4] BOLT  
2. 4B-4278 [4] WASHER  
3. 3B-4506 [4] LOCKWASHER  
4. 9K-3584 [1] CABLE ASSEM.  
  1G-2108 [1] TERMINAL  
  1G-2038 [2] BOLT  
  1M-6120 [2] NUT  
  4S-8783 CABLE 22 cm  
  1G-2107 [1] TERMINAL  
5. 5K-8074 [2] CABLE ASSEM.  
  1M-6120 [2] NUT  
  [2] BOLT  
  1G-2099 [1] TERMINAL  
  1G-2098 [1] TERMINAL  
6. 6K-8515 [1] FRAME ASSEM.  
  [2] ANGLE  
  [2] ANGLE  
  [1] STRIP  
  [1] STRIP  
7. 5S-7219 [4] BATTERY  
8. 4K-9409 [1] CABLE ASSEM.  
  1M-6119 [1] BOLT  
  1M-6120 [1] NUT  
  3D-2098 [1] TERMINAL  
  1S-7252 [1] TERMINAL  
9. [1] CABLE ASSEM.  
  1S-7252 [1] TERMINAL  
  [2] SLEEVE  
  1S-3924 CABLE 163 cm  
  1G-2098 [1] TERMINAL  
  1G-2038 [1] BOLT  
  1M-6120 [1] NUT  
10. [1] HARNESS ASSEM.  
  7H-1189 [3] TERMINAL  
  5P-0497 WIRE 130 cm  
  2Y-2948 [1] PLUG  
  2Y-2949 [3] TERMINAL  
11. 3S-2093 [8] STRAP  
12. 7H-7290 Y [1] SWITCH ASSEM.  
    (Separate Illustration)
13. 3K-8781 [1] FUSE  
14. 4K-5122 [6] HOLDER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
225 EXCAVATOR ENGINE
Governor
225 EXCAVATOR ENGINE
Fuel Check Valve And Bypass Valve
225 EXCAVATOR ENGINE
Fuel Injection Pumps
225 EXCAVATOR ENGINE
Fuel Transfer Pump
225 EXCAVATOR ENGINE
Fuel Injection Pump Housing
225 EXCAVATOR ENGINE
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Changes To Governor Control Group Help Prevent Control Cable Breakage{1265}
1984/02/20
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Overfueling Spring Changed In Sleeve Metering Fuel System For Easier Starts{1286}
1977/04/18
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 225 :

4N-1834 GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
4N-1834 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0249 GOVERNOR AND FUEL INJECTION PUMP GROUP
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0286 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-4882 FUEL INJECTION LINES
FUEL INJECTION LINES
4N-4882 FUEL INJECTION LINES
6N-2476 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP
6N-2477 GOVERNOR AND FUEL INJECTION PUMP
FILTER GP-FUEL
2P-0975 FILTER GP-FUEL
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
STARTING MOTOR GP-ELECTRIC
2Y-1921 STARTING MOTOR GP-ELECTRIC
ALTERNATOR GP-CHARGING
2Y-2936 ALTERNATOR GP-CHARGING
STARTING MOTOR GP-ELECTRIC
2Y-1920 STARTING MOTOR GP-ELECTRIC
ALTERNATOR GROUP
2Y-2940 ALTERNATOR GROUP

Truck sale:

CATERPILLAR 225 1985
 
CATERPILLAR 225 1985
- TRACK EXCAVATORS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
 
 
CATERPILLAR 225 1979
- TRACK EXCAVATORS
PETERSON TRACTOR CO
CATERPILLAR 225 1984
 
CATERPILLAR 225 1984
- TRACK EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1986 CAT 225
Call 
1986 CAT 225

Sound Heavy Machinery
North Carolina
1977 CAT 225
USD $26,900 
1977 CAT 225

Construction Station
Wayne, Michigan
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.