5S9076 FUEL PUMP HOUSING GROUP Part of 7S6470 Fuel Pump Housing and Governor shown on Page 74 966C WHEEL LOADER

Pos.	Part No	Qty	Parts name
1.	3S-9735	[ 6]	LIFTER ASSEM.
2.	9H-5797	[ 6]	PLUNGER AND BARREL ASSEM.
3.	9H-5729		WASHER
4.	1M-3506	[ 6]	RING
5.	4M-0411	[ 6]	BONNET
6.	1M-1077	[ 6]	SEAL
7.	8H-9204	[ 6]	WASHER
8.	2M-4314	[ 6]	BUSHING
9.	9B-1363	[ 6]	SPRING
10.	9H-5746	[ 6]	CHECK
11.	2M-4208	[ 6]	SPACER (.174" Thick)
	2M-4209	[ 6]	SPACER (.178" Thick)
	2M-4210	[ 6]	SPACER (.182" Thick)
	2M-4211	[ 6]	SPACER (.186" Thick)
	2M-4212	[ 6]	SPACER (.190" Thick)
12.	1S-0206	[ 6]	SPRING
13.	5S-9051	[ 1]	HOUSING ASSEM.
14.	4M-1474	[ 3]	PIN
15.	1P-0232	[ 6]	BALL
16.	1P-0234	[ 6]	DOWEL
17.	1P-0231	[ 6]	BALL
18.	1P-0233	[ 6]	DOWEL
19.	9H-1296	[ 1]	BEARING
20.	9H-1284	[ 1]	BEARING
21.	1M-1226	[ 1]	BEARING
22.	2S-7905	[ 1]	PLUG
23.	3D-4603	[ 1]	PLUG
24.	2A-3746	[ 1]	PLUG
25.	1S-1953	[ 1]	BEARING
26.	2M-8604	[ 1]	BEARING
27.	4F-6024	[ 2]	DOWEL
28.	1M-0101	[ 1]	CAMSHAFT ASSEM.
29.	1M-0690	[ 1]	SLEEVE
30.	8H-9208	[ 1]	DOWEL
31.	5S-5058	[ 1]	GEAR ASSEM. (66 Teeth)
32.	8H-9208	[ 1]	DOWEL
33.	1S-7436	[ 1]	RACK
34.	1S-0214	[ 1]	SPRING
35.	7M-5940	[ 1]	PLATE
36.	2H-3504	[ 1]	LOCK
37.	0L-0472	[ 1]	BOLT

#ZEBP05620091

7S-1251: FUEL PRIMING PUMP GROUP

FUEL PRIMING PUMP GROUP

7S1251 FUEL PRIMING PUMP GROUP
9H2256 Pump Group shown below

c202576 ZEBP0562

7S1251 FUEL PRIMING PUMP GROUP Parts scheme

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6N-1005	[ 1]	TUBE ASSEM. (outlet)
2.	5K-9243	[ 2]	FITTING
3.	9H-2256 Y	[ 1]	PUMP GROUP (fuel priming)
4.	8S-0211	[ 1]	TUBE (inlet)
5.	1H-7922	[ 1]	FITTING
			(Includes)
	1F-1344	[ 1]	NUT
6.	2B-2695	[ 2]	BOLT
	3B-4505	[ 2]	LOCKWASHER
7.	7S-1129	[ 1]	BRACKET
8.	3B-8998	[ 1]	FITTING
			(Includes)
	1F-1344	[ 1]	NUT
			SEPARATE ILLUSTRATION

#ZEBP05620092

9H-2256: PUMP GROUP

PUMP GROUP

9H2256 PUMP GROUP
Part of 7S1251 Fuel Priming Pump shown above

c147588 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1M-6718	[ 2]	BALL
2.	1H-1023	[ 2]	SEAL
3.	1M-6781	[ 2]	NUT

#ZEBP05620093

5S-9665: FUEL FILTER

FUEL FILTER

5S9665 FUEL FILTER
See below for Fuel Filter

c109285 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-4015	[1]	PLUNGER ASSEM.
2.	4S-6526	[1]	SPRING
3.	9F-6580	[2]	BOLT
	8M-6701	[2]	WASHER
4.	5S-9605	[1]	HOUSING
	5S-9611	[1]	GASKET
5.	7F-3901	[1]	SEAT
6.	2A-1927	[1]	NEEDLE ASSEM.
7.	5S-9636	[1]	BASE ASSEM.
8.	5S-9060	[1]	GASKET
9.	5M-6214	[3]	PLUG
10.	9F-2247	[1]	PLUG
11.	5S-6333	[1]	ADAPTER
12.	1B-9575	[3]	BOLT
	8F-7242	[3]	WASHER
13.	9S-4167	[1]	STUD
			(Parts of 5S9636 Base Assem.)
14.	1D-4538	[3]	BOLT
15.	8F-7242	[5]	WASHER
16.	4B-3388	[2]	BOLT
17.	5S-9020	[1]	GASKET
18.	8H-9402	[1]	ADAPTER
	9H-4557	[2]	SEAL
19.	1P-2299	[1]	FILTER ASSEM. (Fuel)

#ZEBP05620094

1P-2299: FILTER AS-FUEL

FILTER AS-FUEL

1P2299 FUEL FILTER ASSEMBLY
Part of 5S9665 shown above

ZEBP05620094 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments

#ZEBP05620095

2P-7456: FUEL INJECTION LINES

FUEL INJECTION LINES

2P7456 FUEL INJECTION LINES

c118788 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8L-5696	[ 1]	LINE ASSEM. (No. 6)
2.	2P-8890	[ 1]	LINE ASSEM. (No. 5)
3.	8L-5694	[ 1]	LINE ASSEM. (No. 4)
4.	8S-4003	[ 1]	CLAMP
5.	8S-4005	[ 2]	DAMPER
6.	1B-2790	[ 8]	BOLT
	9M-1974	[ 8]	WASHER
7.	8L-5693	[ 1]	LINE ASSEM. (No. 3)
8.	8L-5692	[ 1]	LINE ASSEM. (No. 2)
9.	8L-5691	[ 1]	LINE ASSEM. (No. 1)
10.	8S-4004	[ 1]	CLAMP
11.	1P-9328	[ 1]	FITTING
12.	5S-7223	[ 1]	TUBE (Drain)
13.	9S-1350	[ 1]	CLIP
14.	0S-0509	[ 1]	BOLT
15.	5M-2894	[ 1]	WASHER
16.	2H-3932	[ 1]	SEAL
17.	2P-3201	[ 1]	BOLT
18.	8F-3469	[ 1]	SEAL
19.	2P-3202	[ 2]	BOLT
20.	4F-7391	[ 1]	SEAL
21.	2P-3210	[ 1]	BOLT
22.	7H-3171	[ 1]	PLUG
23.	3L-1850	[ 1]	PLUG
24.	7F-8607	[ 1]	SEAL
25.	8S-3998	[ 1]	CLAMP
26.	8S-4000	[ 2]	DAMPER
27.	8S-3999	[ 1]	CLAMP
28.	7S-9891	[ 6]	VALVE SERVICE GROUP
29.	5B-3718	[ 1]	SEAL
30.	6F-1069	[ 1]	SEAL ASSEM.
31.	8S-2389	[ 6]	BODY
32.	5H-7225	[ 6]	NUT
33.	3N-3696	[ 1]	BRACKET
34.	2P-7557	[ 1]	BOLT
35.	3B-7730	[ 1]	ELBOW

#ZEBP05620096

5S-7248: FUEL INJECTION VALVES AND LINES

FUEL INJECTION VALVES AND LINES

5S7248 FUEL INJECTION VALVES AND LINES

c115516 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5S-7176	[ 1]	LINE ASSEM. (No. 6)
2.	5S-7175	[ 1]	LINE ASSEM. (No. 5)
3.	9S-1230	[ 1]	LINE ASSEM. (No. 4)
4.	8S-4003	[ 1]	CLAMP
5.	8S-4005	[ 2]	DAMPER
6.	1B-2790	[ 8]	BOLT
	3B-4505	[ 8]	LOCKWASHER
7.	5S-7173	[ 1]	LINE ASSEM. (No. 3)
8.	5S-7172	[ 1]	LINE ASSEM. (No. 2)
9.	5S-7171	[ 1]	LINE ASSEM. (No. 1)
10.	8S-4004	[ 1]	CLAMP
11.	1P-9328	[ 1]	FITTING
12.	5S-7223	[ 1]	TUBE (Drain)
13.	9S-1350	[ 1]	CLIP
14.	0S-0509	[ 1]	BOLT
15.	3B-4506	[ 6]	LOCKWASHER
16.	8M-5248	[ 1]	SEAL
17.	1A-2029	[ 1]	BOLT
18.	8M-5260	[ 1]	SEAL
19.	0S-1591	[ 3]	BOLT
20.	8M-4987	[ 1]	SEAL
21.	0T-0055	[ 1]	BOLT
22.	2P-8704	[ 1]	BRACKET
23.	5M-6214	[ 1]	PLUG
24.	8M-4445	[ 1]	SEAL
25.	8S-3998	[ 1]	CLAMP
26.	8S-4000	[ 2]	DAMPER
27.	8S-3999	[ 1]	CLAMP
28.	7S-9891	[ 6]	VALVE SERVICE GROUP
29.	5B-3718	[ 1]	SEAL
30.	6F-1069	[ 1]	SEAL
31.	8S-2389	[ 6]	BODY
32.	5H-7225	[ 6]	NUT

#ZEBP05620097

2P-7802: LINES GP-AIR COMPRESSOR

LINES GP-AIR COMPRESSOR

2P7802 AIR COMPRESSOR LINES GROUP

c117303 ZEBP0562

2P7802 LINES GP-AIR COMPRESSOR Parts scheme

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5K-9237	[3]	ELBOW
2.	2P-6229	[1]	TUBE ASSEM.
3.	5K-9248	[1]	CONNECTOR
	3B-7255	[1]	BUSHING
4.	5K-9240	[2]	ELBOW
5.	2P-7761	[1]	TUBE ASSEM.
6.	2P-7762	[1]	TUBE ASSEM.
7.	5K-9239	[1]	CONNECTOR
8.	2P-7764	[1]	TUBE ASSEM.
9.	6L-3616	[1]	CONNECTOR

#ZEBP05620098

9S-7993: SERVICE METER

SERVICE METER

9S7993 SERVICE METER

c112409 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9S-3033	[ 1]	CLAMP
2.	1A-6240	[ 1]	WASHER
3.	1T-0416	[ 2]	BOLT
	3F-9556	[ 2]	LOCKWASHER
4.	9S-7992	[ 1]	SERVICE METER ASSEM.
	9S-4131	[ 1]	KIT (Service Meter Window)
			(Includes Window, Gasket & Screws)
5.	8F-7242	[ 1]	WASHER
6.	9S-3032	[ 1]	CLAMP
7.	4M-8303	[ 1]	SEAL

#ZEBP05620099

5S-8501: GLOW PLUG GP

GLOW PLUG GP

5S8501 GLOW PLUG AND WIRING

c113565 ZEBP0562

For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2H-3755	[ 3]	BOLT
	3B-4505	[ 3]	LOCKWASHER
	4B-4277	[ 3]	WASHER
2.	5S-8479	[ 1]	LEAD ASSEM.
3.	1P-7324	[ 6]	GLOW PLUG

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Truck Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01

Engine News

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Special Instruction

Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}

Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}

Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}

Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}

Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}

Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}

Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}

Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}

Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}

7000 Series Nozzles{0782}
7000 Series Nozzles{0782}

Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Technical Information Bulletin

3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}

Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}

Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}

Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}

169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}

Reuse And Salvage Guidelines

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Disassembly and Assembly

Fuel Transfer Pump (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Injection Pump Housing And Governor (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Governor (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Injection Pump Housing (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Injection Pump Housing And Governor (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Transfer Pump (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Injection Pumps (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Injection Pump Housing And Governor (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Governor (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Fuel Injection Pump Housing (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER

Service Magazine

New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21

6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02

6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23

Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13

FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13

Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17

FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31

Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14

New Torque Specification For Bushing{0374,1253,1251}
1982/01/18

New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08

New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01

New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03

Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16

Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20

Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27

New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04

Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11

Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05

Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14

New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01

Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02

New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17

Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14

With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31

Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21

Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28

Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21

New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25

Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16

New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04

Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18

A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08

Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12

Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19

Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23

Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Method To Prevent High Fuel Pressure In The Injection Pump Housing{1262}
1979/06/18

Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13

New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27

Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10

General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17

Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11

New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25

New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02

Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20

Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23

Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Governor Spring Guide Press Depth{1287,1284}
1996/01/22

Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17

Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17

The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17

Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09

Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17

Caterpillar Parts SIS Catalog 966C :

7S-9333 GOVERNOR GROUP

7S-6740 FUEL PUMP HOUSING AND GOVERNOR

2P-6546 FASTENER GP-CYLINDER HEAD

7S-1251 FUEL PRIMING PUMP GROUP

9H-2256 PUMP GROUP

5S-9665 FUEL FILTER

1P-2299 FILTER AS-FUEL

2P-7456 FUEL INJECTION LINES

5S-7248 FUEL INJECTION VALVES AND LINES

2P-7802 LINES GP-AIR COMPRESSOR

9S-7993 SERVICE METER

Truck sale:

Caterpillar 966C
- Wheel Loaders
PETERSON TRACTOR CO

30,547

Caterpillar 966C, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA

31,209

Caterpillar 966C, Wheel Loaders, Construction

35,551

Caterpillar 966C, Wheel Loaders, Construction

FINNING CANADA

28.000

Caterpillar 966C, Wielladers, Bouw
- Wheel loaders
MICHIGAN CAT