AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7T4586 BLADE GP-STRAIGHT BULLDOZER S/N 63S491-UP ALSO PART OF 5Y0858 & 5Y0865 BULLDOZER ARS AN ATTACHMENT D6D


WORK TOOLS
BLADE GP
IMPLEMENTS
PUSH ARM GP
BRACE GP
PUSH ARM GP
HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
IMPLEMENTS
C-FRAME GP
HYDRAULIC SYSTEM
LINES GP-BULLDOZER

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 75W
 D6D TRACTOR / POWER SHIFT / 75W00001-04535 (MACHINE) POWERED BY 3306 ENGINE ZEBP0617 D6D 75W   (1977)

WORK TOOLS

BLADE GP
BLADE GP-ANGLING
9J-8528 BLADE GP-ANGLING
BLADE GP-STRAIGHT
7T-4586 BLADE GP-STRAIGHT
BLADE GP-STRAIGHT
8J-4657 BLADE GP-STRAIGHT
 

#ZEBP06170550
 

7T-4586: BLADE GP-STRAIGHT

7T4586 BLADE GP-STRAIGHT
BULLDOZER S/N 63S491-UP
ALSO PART OF 5Y0858 & 5Y0865 BULLDOZER ARS
AN ATTACHMENT
c349401 ZEBP0617
7T4586 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-4585 [1] BLADE AS  
2. 7J-8573 [2] DEFLECTOR  
3. 4J-3471 [1] SOCKET-RH  
  4J-3472 [1] SOCKET-LH  
4. 7J-8393 [1] RETAINER  
5. 4J-1637 [2] BRACKET  
6. 6J-8183 [2] BRACKET  
7. 4J-3696 [1] MOLDBOARD AS  
8. 6J-2219 [1] SHOE-RH  
  6J-2220 [1] SHOE-LH  
9. 4J-1639 [1] BRACKET-RH  
  4J-1640 [1] BRACKET-LH  
10. 8J-4813 [2] SUPPORT AS  
11. 8J-4810 [4] PLATE  
12. 6J-0499 [2] LUG  
13. 2J-3506 [27] NUT-FULL  
  4F-7827 [27] BOLT-PLOW  
14. 3G-8319 [1] BIT-END-RH  
  3G-8320 [1] BIT-END-LH  
15. 4T-3010 [2] EDGE-CUTTING (END)  
  4T-3013 [1] EDGE-CUTTING (CENTER)  
16. 4J-1611 [2] PLATE-WEAR  
17. 4J-9853 B [8] SHIM  
18. 5F-8933 [4] BOLT-PLOW  
  2J-3506 [4] NUT-FULL  
  3B-4512 [4] LOCKWASHER  
  B   USE AS REQUIRED
 

#ZEBP06170551
 

5Y-0853: PUSH ARM & BRACE GP

5Y0853 PUSH ARM & BRACE GP-WITH TILT CYLINDER
BULLDOZER S/N 63S491-UP
2J1402-PAGE 125.02
ALSO PART OF 5Y0858, 5Y0865 BULLDOZER ARS
AN ATTACHMENT
c470015 ZEBP0617
5Y0853 PUSH ARM & BRACE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-2905 [2] CAP-BEARING  
2. 5B-5473 [4] BOLT  
  4F-1204 [4] NUT  
  5P-8250 [4] WASHER  
3. 3J-4358 [1] PUSH ARM AS-LH  
4. 4J-3590 [1] BEARING  
5. 4J-3592 [1] BRACKET-LH  
6. 3J-4285 [1] BEARING  
7. 4J-1616 [1] BRACKET  
8. 3F-6185 [2] PIN (LONG)  
9. 4F-0255 [8] PIN (SHORT)  
  3B-4627 [8] COTTER  
10. 4J-3583 [1] SCREW-ADJUSTING  
11. 3B-8489 [4] FITTING-GREASE  
12. 7J-2758 [1] BRACE AS-TILT  
13. 8J-4866 [1] LUG  
14. 3F-6492 [1] BALLSTUD  
15. 3F-6612 [1] CAP-BALLJOINT  
16. 3F-4854 [1] KNOB  
17. 6F-3908 [1] HANDLE  
18. 4J-3589 [2] CAP-BALLJOINT  
19. 0L-1169 [8] BOLT  
20. 3F-6608 [14] SHIM (.0299MMTHK)  
21. 3J-4284 [2] CAP  
22. 2B-7408 [4] PLUG-PIPE  
23. 4J-1612 [2] PIN  
24. 4J-9645 [1] BRACKET AS  
25. 4J-9778 [2] PLATE-WEAR  
26. 3J-2452 [2] CAP-BALLJOINT  
27. 0S-1844 [8] BOLT  
  2J-3506 [8] NUT-FULL  
28. 3J-4357 [1] PUSH ARM AS-RH  
  4J-1616 [1] BRACKET  
29. 4J-3590 [1] BEARING  
30. 3J-4285 [1] BEARING  
31. 4J-3591 [1] BRACKET-RH  
32. 3J-4352 [2] ARM AS-BRACE  
    (EACH INCLUDES)
33. 4J-1614 [1] PIN-PIVOT  
34. 4J-2000 [1] BALLSTUD  
35. 3J-2452 [1] CAP-BALLJOINT  
36. 3F-4956 [14] SHIM (.8MMTHK)  
37. 0S-1756 [8] BOLT  
38. 3F-4971 [2] PIN  
39. 2J-1402 Y [1] CYLINDER GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#ZEBP06170552
 

9J-9150: BRACE GP-BULLDOZER

9J9150 BRACE GP-BULLDOZER
PART OF 2Y9639, 5Y0571 & 7J1755 BULLDOZER ARS
AN ATTACHMENT
c571532 ZEBP0617
9J9150 BRACE GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-2585 [2] PIN  
2. 5P-2566 [2] BOLT  
  8T-4223 [2] WASHER-HARD  
  3J-3668 [2] PIN  
3. 3J-6559 [6] CAP-BEARING  
  8E-9212 B [156] SHIM (.8MM THK)  
4. 3J-6560 [2] SCREW-ADJUSTABLE  
5. 7X-0370 [24] BOLT  
  8T-4994 [24] WASHER  
6. 3B-8489 [4] FITTING-GREASE  
7. 4J-2592 [2] BRACE AS  
    (EACH INCLUDES)
8. 6F-3908 [1] HANDLE  
9. 3F-4854 [1] KNOB  
10. 8J-4866 [1] LUG  
11. 9J-9148 [2] ARM AS-ADJUSTING  
    (EACH INCLUDES)
12. 3J-6574 [1] TRUNNION  
13. 9J-9147 [1] NUT  
14. 5J-0089 [1] PLATE-RH  
  5J-0090 [1] PLATE-LH  
15. 4J-2590 [1] BEARING  
16. 4B-4098 C [1] PLUG-CUP  
17. 3J-6577 [2] PIN-BRACE  
18. 4F-1252 C [2] PIN  
  3J-1770 [2] PIN-LOCK  
19. 3J-6561 [2] SCREW-ADJUSTABLE  
20. 3J-6573 [2] SCREW-ADJUSTING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06170553
 

3J-4359: PUSH ARM & BRACE GP

3J4359 PUSH ARM & BRACE GP
BULLDOZER S/N 63S1-UP
PART OF 2Y9972 & 2Y9637 BULLDOZER ARS
ALSO AN ATTACHMENT
c615865 ZEBP0617
3J4359 PUSH ARM & BRACE GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-2905 [2] CAP-BEARING  
2. 5B-5473 [4] BOLT (1-8X6.5IN)  
  4F-1204 [4] NUT  
  5P-8250 [4] WASHER  
3. 3J-4358 [1] PUSH ARM AS-LH  
4. 4J-3590 [1] BEARING  
5. 4J-3592 [1] BRACKET-LH  
6. 3J-4285 [1] BEARING  
7. 4J-1616 [1] BRACKET  
8. 3F-6185 [2] PIN  
9. 4F-0255 [8] PIN  
  3B-4626 [8] COTTER  
10. 4J-3583 [2] SCREW-ADJUSTMENT  
11. 3B-8489 [4] FITTING-GREASE  
12. 7J-2758 [2] BRACE AS-TILT  
13. 8J-4866 [1] LUG  
14. 3F-6492 [1] STUD-BALL  
15. 3F-6612 [1] CAP-BALL JOINT  
16. 3F-4854 [1] KNOB  
17. 6F-3908 [1] HANDLE  
18. 4J-3589 [2] CAP-BALL JOINT  
19. 0L-1169 [8] BOLT (5/8-11X3.75IN)  
20. 3F-6608 B [14] SHIM (.76MM THK)  
21. 3J-4284 [2] CAP  
22. 2B-7408 [4] PLUG-PIPE  
23. 4J-1612 [2] PIN  
24. 4J-9645 [1] BRACKET AS  
25. 4J-9778 [2] PLATE-WEAR  
26. 3J-2452 [2] CAP-BALL JOINT  
27. 0S-1844 [8] BOLT  
  2J-3506 [8] NUT-FULL (3/4-10 THD)  
28. 3J-4357 [1] PUSH ARM AS-RH  
  4J-1616 [1] BRACKET  
29. 4J-3590 [1] BEARING  
30. 3J-4285 [1] BEARING  
31. 4J-3591 [1] BRACKET-RH  
32. 3J-4352 [2] ARM AS-BRACE  
    (EACH INCLUDES)
33. 4J-1614 [1] PIN-PIVOT  
34. 4J-2000 [1] STUD-BALL  
35. 3J-2452 [1] CAP-BALL JOINT  
36. 3F-4956 B [14] SHIM (.8MM THK)  
37. 0S-1756 [8] BOLT (3/4-10X4.25IN)  
38. 3F-4971 [2] PIN  
39. 4T-4866 B [52] SHIM (0.8MM THK)  
40. 8E-5819 B [52] SHIM (.8MM THK)  
  B   USE AS REQUIRED
 

#ZEBP06170554
 

8J-6868: CYLINDER GP-LIFT

8J6868 CYLINDER GP-LIFT-2 REQUIRED (CHG 06)
101.6 MM (4 IN.) BORE X 1030 MM (40.5 IN.) STROKE
BULLDOZER S/N 54U1-UP,63S1-UP. PART OF 5Y0571, 5Y0865 BULLDOZER ARS
FOR USE WITH 7 ROLLER FRAME
AN ATTACHMENT
c615217 ZEBP0617
8J6868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 C [1] PISTON AS  
  8J-9282 [1] SPACER (10.8MM THK)  
  9J-2010 [2] INSERT-PISTON  
  9J-2009 [1] PLUNGER  
  9J-2008 [1] PLUNGER  
  5J-5402 [1] SEAL AS  
2. 5J-0964 [1] SEAL-U-CUP  
3. 2K-6830 [1] RING-BACKUP  
4. 1H-8128 [1] SEAL-O-RING (94.84MM ID)  
5. 5J-3620 [1] SEAL-RING  
6. 5P-1839 C [1] BOLT-LOCKING  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING-WEAR  
8. 7J-8295 [1] HEAD  
9. 8J-6867 R [1] CYLINDER AS  
10. 4J-6374 [2] BEARING-SLEEVE  
11. 3B-2968 C [4] BOLT (3/4-10X3.5IN)  
  5P-8248 C [4] WASHER-HARD (3.5MM THK)  
12. 7J-6461 [1] CROWN  
13. 8J-6866 R [1] ROD AS-PISTON  
14. 1K-6982 [1] SEAL-LIP  
15. 3J-6559 C [1] CAP-BEARING  
16. 3J-6572 BC [12] SHIM (.5MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP06170555
 

7J-8302: CYLINDER GP

7J8302 CYLINDER GP
(CHG 4) 102MM (4IN) BORE X 864MM (34IN) STROKE-2 REQUIRED
TYPE 1.
PART OF 2Y9639, 2Y9637 & 5Y0864 BULLDOZER ARS
AN ATTACHMENT
sp1312 ZEBP0617
7J8302 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 5J-0964 [1] SEAL  
3. 2K-6830 [1] RING  
4. 1H-8128 [1] SEAL  
5. 5J-3620 [1] SEAL  
6. 8J-4359 [1] WASHER  
7. 1M-1571 [1] RING  
8. 7J-8295 [1] HEAD  
9. 7J-8301 R [1] CYLINDER ASSEM.  
10. 4J-6374 [2] BEARING  
11. 8J-5912 C [1] SETSCREW  
12. 7J-6461 [1] CROWN  
13. 7J-8294 R [1] ROD ASSEM.  
14. 1K-6982 [1] SEAL  
15. 9J-2007 C [1] PISTON ASSEM.  
16. 9J-2008 C [1] PLUNGER  
17. 9J-2009 C [1] PLUNGER  
18. 8J-9282 C [2] SPACER  
19. 9J-2010 C [2] INSERT  
20. 5J-5402 C [1] SEAL ASSEMBLY  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP06170556
 

7J-8302: CYLINDER GP

7J8302 CYLINDER GP (CHANGE 04)
102MM (4IN) BORE X 864MM (34IN) STROKE-2 REQUIRED
TYPE 2. BULLDOZER S/N 63S1-UP
PART OF 2Y9639, 2Y9637 BULLDOZER ARS
AN ATTACHMENT
c464692 ZEBP0617
7J8302 CYLINDER GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-0964 [1] SEAL-U-CUP  
2. 8C-3840 C [1] SEAL-LIP TYPE  
3. 7J-8294 R [1] ROD AS-PISTON  
4. 9T-4761 C [1] HEAD  
5. 8C-3839 C [1] SEAL AS  
6. 5P-1839 C [1] BOLT-SELF LOCKING  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING-WEAR  
8. 1H-8128 [1] SEAL-O-RING  
9. 7J-8301 R [1] CYL AS-HYD OS  
10. 4J-6374 [2] BEARING-SLEEVE  
11. 2K-6830 [1] RING-BACK-UP  
12. 7J-6461 [1] CROWN  
13. 9J-2007 [1] PISTON AS  
14. 9J-2008 [1] PLUNGER  
15. 9J-2009 [1] PLUNGER  
16. 8J-9282 [2] SPACER  
17. 9J-2010 [2] INSERT-PISTON  
18. 5J-5402 [1] SEAL AS  
19. 8T-5668 C [1] RING-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP06170557
 

5Y-0859: LINES GP-TILT CYLINDER

5Y0859 LINES GP-TILT CYLINDER
WITH HOSE PROTECTION
BULLDOZER S/N 63S491-UP
PART OF 5Y0857, 5Y0858, 5Y0864 & 5Y0865 BULLDOZERS ARS
c511353 ZEBP0617
5Y0859 LINES GP-TILT CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0190 [4] FLANGE  
2. 0S-1588 [8] BOLT  
3. 4J-5267 [2] SEAL  
4. 0S-1621 [2] BOLT  
5. 5P-8245 [8] WASHER 3MM(.118IN)THK  
6. 5F-7207 [1] SPACER  
7. 2P-8492 [1] GUARD  
8. 2Y-8591 I [2] HOSE AS  
9. 5M-2894 [8] WASHER  
10. 3Y-5405 [2] RUBBER  
11. 005-4362 [2] ELBOW  
  3K-0360 [2] SEAL-O-RING  
12. 2P-6588 [2] HEAD-ADAPTER  
13. 0S-1595 [4] BOLT  
  5P-8245 [4] WASHER  
14. 6J-0333 [1] GUARD AS  
  3J-3708 [2] SPACER  
15. 5V-4140 [1] PLATE  
  4D-5533 [1] CLAMP  
16. 3S-2093 [9] STRAP-CABLE  
  I   SEE HOSE FABRICATION GUIDE
 

#ZEBP06170558
 

9J-9469: C-FRAME GP

9J9469 C-FRAME GP
PART OF 269639, 5Y0571 & 7J1755 BULLDOZER ARS
AN ATTACHMENT
c525686 ZEBP0617
9J9469 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2213 C [1] C-FRAME AS  
2. 6J-9187 [1] BRACKET AS-RH  
  7J-2595 [2] BRACKET  
3. 4J-2414 [1] TRUNNION  
4. 6J-9188 [1] BRACKET AS-LH  
  7J-2595 [2] BRACKET  
5. 4J-2414 [1] TRUNNION  
6. 6F-2904 [2] BEARING  
7. 4F-2152 [1] COLLAR  
8. 3J-1943 [2] COLLAR  
9. 9J-2332 [1] BEARING-PIVOT  
  1K-4279 [2] PLATE  
10. 3J-5432 [1] PIN-PIVOT  
11. 3J-4604 [2] PLATE  
12. 3J-2682 [6] BRACKET  
13. 7T-2214 C [2] PLATE  
14. 8P-9770 [1] PLATE  
15. 6F-2905 [2] CAP-BEARING  
16. 5B-5473 [4] BOLT  
  4F-1204 [4] NUT  
  3K-5234 [4] WASHER-HARD  
17. 4T-4866 B [52] SHIM (8MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06170559
 

9P-8113: LINES GP-BULLDOZER

9P8113 LINES GP-DOZER
PART OF 5Y0571 & 5Y865 BULLDOZER ARS
AN ATTACHMENT
c525739 ZEBP0617
9P8113 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-7314 I [4] HOSE AS  
2. 0S-1588 [2] BOLT  
3. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  1A-4784 [2] WASHER (2.65MM THK)  
  4B-4280 [2] WASHER (2.5MM THK)  
4. 8B-2133 [2] BOSS  
5. 8T-7235 [12] SEAL  
6. 0S-1590 [26] BOLT (3/8-16X2IN)  
7. 4J-8265 [24] NUT  
8. 3P-0568 I [2] HOSE AS  
9. 6K-8564 [2] STRIP AS  
    (EACH INCLUDES)
  9F-2978 [1] NUT-WELD  
10. 8J-1182 [4] CLAMP  
11. 0S-1571 [20] BOLT  
12. 2K-0190 [24] FLANGE  
13. 3P-0550 [2] ELBOW  
14. 0S-1591 [8] BOLT  
15. 3B-4506 [36] LOCKWASHER  
16. 6P-8063 [2] TUBE AS  
17. 3H-5522 [2] PLATE-CONNECTOR  
18. 8T-7266 [6] SEAL-FACE  
19. 7G-2450 I [2] HOSE AS  
20. 2P-9017 [2] BRACKET AS  
    (EACH INCLUDES)
  2P-9015 [1] SPACER  
21. 2A-4639 [4] BOLT (3/8-16X1.625IN)  
22. 1P-7018 [2] PLATE-ORIFICE  
23. 9P-7232 [2] TUBE AS  
  8T-7129 [4] SEAL  
24. 7S-6719 [2] STUD-TAPERLOCK  
  1D-4717 [2] NUT  
  I   SEE HOSE FABRICATION GUIDE
 

Information:

Caterpillar Parts SIS Catalog D6D :

BLADE GP-ANGLING
9J-8528 BLADE GP-ANGLING
7J-1755 BULLDOZER AR-ANGLING
5Y-0865 BULLDOZER AR-STRAIGHT
5Y-0864 BULLDOZER AR-STRAIGHT
5Y-0865 BULLDOZER AR-STRAIGHT
5Y-0857 BULLDOZER AR-STRAIGHT
5Y-0858 BULLDOZER AR-STRAIGHT
5Y-0571 BULLDOZER AR-ANGLING
PUSH ARM & BRACE GP
5Y-0853 PUSH ARM & BRACE GP
BRACE GP-BULLDOZER
9J-9150 BRACE GP-BULLDOZER
PUSH ARM & BRACE GP
3J-4359 PUSH ARM & BRACE GP
CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP
7J-8302 CYLINDER GP
LINES GP-TILT CYLINDER
5Y-0859 LINES GP-TILT CYLINDER
C-FRAME GP
9J-9469 C-FRAME GP

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.