AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J6868 CYLINDER GP-LIFT-2 REQUIRED (CHG 06) 101.6 MM (4 IN.) BORE X 1030 MM (40.5 IN.) STROKE BULLDOZER S/N 54U1-UP,63S1-UP. PART OF 5Y0571, 5Y0865 BULLDOZER ARS FOR USE WITH 7 ROLLER FRAME AN ATTACHMENT D6D


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-BULLDOZER
IMPLEMENTS
MOUNTING GP
BRACE GP
HYDRAULIC SYSTEM
CYLINDER GP
WORK TOOLS
BLADE GP
IMPLEMENTS
C-FRAME GP
OPERATOR STATION
ROPS/FOPS GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 74W
 D6D TRACTOR / DIRECT DRIVE / 74W00001-02560 (MACHINE) POWERED BY 3306 ENGINE ZEBP0618 D6D 74W   (1977)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP-LIFT
8J-6868 CYLINDER GP-LIFT
BRACKET GP-CYLINDER
5J-9210 BRACKET GP-CYLINDER
CYLINDER AR-TILT
2Y-8590 CYLINDER AR-TILT
CYLINDER GP-HYDRAULIC
2J-1402 CYLINDER GP-HYDRAULIC
 

#ZEBP06180520
 

8J-6868: CYLINDER GP-LIFT

8J6868 CYLINDER GP-LIFT-2 REQUIRED (CHG 06)
101.6 MM (4 IN.) BORE X 1030 MM (40.5 IN.) STROKE
BULLDOZER S/N 54U1-UP,63S1-UP. PART OF 5Y0571, 5Y0865 BULLDOZER ARS
FOR USE WITH 7 ROLLER FRAME
AN ATTACHMENT
c615217 ZEBP0618
8J6868 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2007 C [1] PISTON AS  
  8J-9282 [1] SPACER (10.8MM THK)  
  9J-2010 [2] INSERT-PISTON  
  9J-2009 [1] PLUNGER  
  9J-2008 [1] PLUNGER  
  5J-5402 [1] SEAL AS  
2. 5J-0964 [1] SEAL-U-CUP  
3. 2K-6830 [1] RING-BACKUP  
4. 1H-8128 [1] SEAL-O-RING (94.84MM ID)  
5. 5J-3620 [1] SEAL-RING  
6. 5P-1839 C [1] BOLT-LOCKING  
  8J-4359 [1] WASHER  
7. 1M-1571 [1] RING-WEAR  
8. 7J-8295 [1] HEAD  
9. 8J-6867 R [1] CYLINDER AS  
10. 4J-6374 [2] BEARING-SLEEVE  
11. 3B-2968 C [4] BOLT (3/4-10X3.5IN)  
  5P-8248 C [4] WASHER-HARD (3.5MM THK)  
12. 7J-6461 [1] CROWN  
13. 8J-6866 R [1] ROD AS-PISTON  
14. 1K-6982 [1] SEAL-LIP  
15. 3J-6559 C [1] CAP-BEARING  
16. 3J-6572 BC [12] SHIM (.5MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP06180521
 

9P-8114: LINES GP-BULLDOZER

9P8114 LINES GP-DOZER
BULLDOZER S/N 63S1-UP
PART OF 2Y9639, 2Y9637, 5Y864 BULLDOZER AR
AN ATTACHMENT
c551693 ZEBP0618
9P8114 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [8] BOLT  
2. 0L-1143 [12] BOLT  
3. 0T-0573 [4] BOLT  
4. 9P-4349 [1] TUBE AS (LH)  
5. 8P-7174 [2] PLATE  
6. 9P-4348 [1] TUBE AS (LH)  
7. 7G-8208 I [2] HOSE AS  
8. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
9. 5M-2894 C [16] WASHER  
10. 1L-4684 [4] CLAMP-HOSE  
11. 8B-2133 [2] BOSS  
12. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
13. 7S-3916 [2] CLIP (TAB)  
  7S-3919 [2] CLIP (SLOT)  
14. 9P-4350 [1] TUBE AS (RH)  
15. 9P-4347 [1] TUBE AS (RH)  
16. 4J-0519 [6] SEAL  
17. 4J-5267 [4] SEAL  
18. 1P-4576 [8] FLANGE  
19. 4J-8265 [16] NUT  
20. 7G-8208 I [2] HOSE AS  
21. 1P-7018 [2] PLATE-ORIFICE  
22. 1C-2251 [8] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
 

#ZEBP06180522
 

9P-8113: LINES GP-BULLDOZER

9P8113 LINES GP-DOZER
PART OF 5Y571 & 5Y865 BULLDOZER ARS
AN ATTACHMENT
c525739 ZEBP0618
9P8113 LINES GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8K-7314 I [4] HOSE AS  
2. 0S-1588 [2] BOLT  
3. 1A-1460 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
  1A-4784 [2] WASHER (2.65MM THK)  
  4B-4280 [2] WASHER (2.5MM THK)  
4. 8B-2133 [2] BOSS  
5. 8T-7235 [12] SEAL  
6. 0S-1590 [26] BOLT (3/8-16X2IN)  
7. 4J-8265 [24] NUT  
8. 3P-0568 I [2] HOSE AS  
9. 6K-8564 [2] STRIP AS  
    (EACH INCLUDES)
  9F-2978 [1] NUT-WELD  
10. 8J-1182 [4] CLAMP  
11. 0S-1571 [20] BOLT  
12. 2K-0190 [24] FLANGE  
13. 3P-0550 [2] ELBOW  
14. 0S-1591 [8] BOLT  
15. 3B-4506 [36] LOCKWASHER  
16. 6P-8063 [2] TUBE AS  
17. 3H-5522 [2] PLATE-CONNECTOR  
18. 8T-7266 [6] SEAL-FACE  
19. 7G-2450 I [2] HOSE AS  
20. 2P-9017 [2] BRACKET AS  
    (EACH INCLUDES)
  2P-9015 [1] SPACER  
21. 2A-4639 [4] BOLT (3/8-16X1.625IN)  
22. 1P-7018 [2] PLATE-ORIFICE  
23. 9P-7232 [2] TUBE AS  
  8T-7129 [4] SEAL  
24. 7S-6719 [2] STUD-TAPERLOCK  
  1D-4717 [2] NUT  
  I   SEE HOSE FABRICATION GUIDE
 

#ZEBP06180523
 

9J-2697: MOUNTING GP-CYLINDER

9J2697 MOUNTING GP-CYLINDER
BULLDOZER S/N 63S1-UP
PART OF 2Y9639, 2Y9637, 5Y864 BULLDOZER AR
AN ATTACHMENT
c321682 ZEBP0618
9J2697 MOUNTING GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6559 [2] CAP-BEARING  
  3J-6572 [24] SHIM .5MM(.02IN)THK  
2. 3B-2968 [8] BOLT  
  5P-8248 C [8] WASHER-HARD  
3. 3B-8488 C [2] FITTING  
4. 2J-6305 [2] SEAL-OIL  
5. 4J-6326 C [4] BEARING-HALF  
6. 2Y-3053 [2] PIN  
7. 2Y-3060 [1] TUBE AS  
8. 2J-6316 [2] BEARING-SLEEVE  
9. 2J-6306 [2] BEARING-SLEEVE  
10. 0T-0199 [2] PLUG-CUP  
11. 0S-1594 [4] BOLT  
12. 5P-8245 C [10] WASHER  
13. 1M-0130 [2] COVER  
  4M-6480 [2] GASKET  
14. 1D-4600 [8] BOLT  
  4K-0367 [8] NUT  
  2S-5658 [8] WASHER-HARD  
15. 5J-6156 [2] YOKE  
16. 4J-6327 [4] CAP  
17. 3B-8489 [4] FITTING-GREASE  
18. 2B-0947 [8] BOLT  
19. 2H-3788 [2] NUT-SELF LOCKING  
20. 9J-1903 [2] LINK AS  
   
21. 0S-1591 [2] BOLT  
  1D-4717 [2] NUT  
22. 5M-2894 C [6] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06180524
 

9J-9150: BRACE GP-BULLDOZER

9J9150 BRACE GP-DOZER
PART OF 269639, 5Y0571 & 7J7155 BULLDOZER ARS
AN ATTACHMENT
c571532 ZEBP0618
9J9150 BRACE GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-2585 [2] PIN  
2. 5P-2566 [2] BOLT  
  8T-4223 [2] WASHER-HARD  
  3J-3668 [2] PIN  
3. 3J-6559 [6] CAP-BEARING  
  8E-9212 B [156] SHIM (.8MM THK)  
4. 3J-6560 [2] SCREW-ADJUSTABLE  
5. 7X-0370 [24] BOLT  
  8T-4994 [24] WASHER  
6. 3B-8489 [4] FITTING-GREASE  
7. 4J-2592 [2] BRACE AS  
    (EACH INCLUDES)
8. 6F-3908 [1] HANDLE  
9. 3F-4854 [1] KNOB  
10. 8J-4866 [1] LUG  
11. 9J-9148 [2] ARM AS-ADJUSTING  
    (EACH INCLUDES)
12. 3J-6574 [1] TRUNNION  
13. 9J-9147 [1] NUT  
14. 5J-0089 [1] PLATE-RH  
  5J-0090 [1] PLATE-LH  
15. 4J-2590 [1] BEARING  
16. 4B-4098 C [1] PLUG-CUP  
17. 3J-6577 [2] PIN-BRACE  
18. 4F-1252 C [2] PIN  
  3J-1770 [2] PIN-LOCK  
19. 3J-6561 [2] SCREW-ADJUSTABLE  
20. 3J-6573 [2] SCREW-ADJUSTING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06180525
 

5J-9210: BRACKET GP-CYLINDER

5J9210 BRACKET GP-CYLINDER
PART OF 5Y571, 5Y865 BULLDOZER AR
AN ATTACHMENT
c316840 ZEBP0618
5J9210 BRACKET GP-CYLINDER Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [8] BOLT  
2. 3B-4508 [16] LOCKWASHER  
3. 4J-6327 [4] CAP  
4. 5J-6161 [2] PIN  
5. 5J-6156 [2] YOKE  
6. 3B-8489 [4] FITTING-GREASE  
7. 0S-1595 [8] BOLT  
8. 4J-6326 C [4] BEARING-HALF  
9. 2J-6305 [2] SEAL-OIL  
10. 2H-3788 [2] NUT-SELF LOCKING  
  4B-4280 [2] WASHER  
11. 3Y-7923 C [2] LINK AS  
12. 0T-0772 [2] BOLT  
  1D-4718 [2] NUT-FULL  
13. 5J-6162 [2] PLATE  
  8J-7067 C [2] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06180526
 

9J-8528: BLADE GP-ANGLING

9J8528 BLADE GP-ANGLING
PART OF 2Y9639, 5Y0571 & 7J1755 BULLDOZER ARS
AN ATTACHMENT
c615191 ZEBP0618
9J8528 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-6575 [4] BEARING  
2. 1A-8063 [16] BOLT (3/4-10X2.5IN)  
3. 3B-4512 [16] LOCKWASHER  
4. 9J-8427 [1] BRACKET  
5. 3J-5030 [1] PLATE-WEAR-LH (END)  
6. 3F-6149 [1] PIN  
7. 9J-8418 [1] SHOE-TRACK-LH  
8. 5J-6940 [1] BIT-END-LH  
  4J-8261 A [1] BIT-END-RH  
9. 3J-5029 [1] PLATE-WEAR-RH (END)  
10. 3J-6570 [4] SUPPORT-BEARING  
11. 9J-8417 [1] SHOE-TRACK-RH  
12. 5J-6939 [1] BIT-END-RH  
  4J-8261 A [1] BIT-END-RH  
13. 6J-1406 [2] EDGE-CUTTING  
14. 4F-7827 [32] BOLT-PLOW  
15. 2J-3506 [32] NUT-FULL (3/4-10 THD)  
16. 4F-0255 [1] PIN  
17. 3B-4626 [1] COTTER  
18. 5P-4020 AC [1] PLATE-SERIAL NUMBER  
  4B-4158 AC [2] SCREW  
  3J-3740 A [1] PLATE-SERVICE INFORMATION  
    (610MMX610MM)
    (FOR REPLACEMENT OF
    WORN MOLDBOARD)
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06180527
 

9J-9469: C-FRAME GP

9J9469 FRAME GP-C
TYPE 1
ALSO PART OF 2Y9639 BULLDOZER AR
AN ATTACHMENT
c161277 ZEBP0618
9J9469 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-8526 [ 1] C-FRAME ASSEM.  
    (Includes)
2. 6J-9187 [ 1] BRACKET ASSEM. (R.H.)  
    (Includes)
  7J-2595 [ 2] BRACKET  
3. 4J-2414 [ 1] TRUNNION  
4. 6J-9188 [ 1] BRACKET ASSEM. (L.H.)  
    (Includes)
  7J-2595 [ 2] BRACKET  
5. 4J-2414 [ 1] TRUNNION  
6. 6F-2904 [ 2] BEARING  
7. 4F-2152 [ 1] COLLAR  
8. 3J-1943 [ 2] COLLAR  
9. 9J-2332 [ 1] BEARING  
  1K-4279 [ 1] STRIP  
10. 3J-5432 [ 1] PIN  
11. 3J-4604 [ 2] PLATE  
12. 3J-2682 [ 6] BRACKET  
13. 5B-5473 [ 4] BOLT  
  4F-1204 [ 4] NUT  
  3K-5234 [ 4] WASHER  
14. 6F-2905 [ 2] CAP  
 

#ZEBP06180528
 

9J-9469: C-FRAME GP

9J9469 FRAME GP-C
TYPE 2
PART OF 2Y9639, 5Y0571 & 7J1755 BULLDOZER ARS
AN ATTACHMENT
c525686 ZEBP0618
9J9469 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-2213 C [1] C-FRAME AS  
2. 6J-9187 [1] BRACKET AS-RH  
  7J-2595 [2] BRACKET  
3. 4J-2414 [1] TRUNNION  
4. 6J-9188 [1] BRACKET AS-LH  
  7J-2595 [2] BRACKET  
5. 4J-2414 [1] TRUNNION  
6. 6F-2904 [2] BEARING  
7. 4F-2152 [1] COLLAR  
8. 3J-1943 [2] COLLAR  
9. 9J-2332 [1] BEARING-PIVOT  
  1K-4279 [2] PLATE  
10. 3J-5432 [1] PIN-PIVOT  
11. 3J-4604 [2] PLATE  
12. 3J-2682 [6] BRACKET  
13. 7T-2214 C [2] PLATE  
14. 8P-9770 [1] PLATE  
15. 6F-2905 [2] CAP-BEARING  
16. 5B-5473 [4] BOLT  
  4F-1204 [4] NUT  
  3K-5234 [4] WASHER-HARD  
17. 4T-4866 B [52] SHIM (8MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP06180529
 

5Y-0360: ROPS AR

5Y0360 ROPS AR-OPEN
S/N 74W1417-UP
AN ATTACHMENT
ZEBP06180529 ZEBP0618
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
  9G-6075 Y [1] MOUNTING GP-ROPS  
   
   
  9G-6074 Y [1] ROPS GP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog D6D :

CYLINDER GP
7J-8302 CYLINDER GP
CYLINDER GP
7J-8302 CYLINDER GP
SCREEN GP-PROTECTION
8P-2132 SCREEN GP-PROTECTION
5Y-0571 BULLDOZER AR-ANGLING
2Y-9639 BULLDOZER AR-ANGLING
5Y-0571 BULLDOZER AR-ANGLING
LINES GP-RIPPER
8J-7050 LINES GP-RIPPER
TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER
LINES GP-BULLDOZER
9P-8114 LINES GP-BULLDOZER
LINES GP-BULLDOZER
9P-8113 LINES GP-BULLDOZER
MOUNTING GP-CYLINDER
9J-2697 MOUNTING GP-CYLINDER
BRACE GP-BULLDOZER
9J-9150 BRACE GP-BULLDOZER
BRACKET GP-CYLINDER
5J-9210 BRACKET GP-CYLINDER
BLADE GP-ANGLING
9J-8528 BLADE GP-ANGLING
C-FRAME GP
9J-9469 C-FRAME GP
C-FRAME GP
9J-9469 C-FRAME GP

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.