AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2Y5800 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 2 S/N 60Z4322-4449 PART OF 2Y5716, 2Y8994, 5Y1156 GOVERNOR & FUEL INJECTION PUMP 120B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
LINES GP-FUEL

MOTOR GRADER 120B MOTOR GRADER 32C
 120B MOTOR GRADER 32C00100-UP (MACHINE) POWERED BY 3306 ENGINE ZEBP1394 120B 32C   (1981)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
2Y-5716 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
2Y-8994 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV, FUEL INJ & TFR
5Y-1156 PUMP GP-GOV, FUEL INJ & TFR
2Y-6158 SHIM GP
PUMP GP-FUEL INJECTION
2Y-5800 PUMP GP-FUEL INJECTION
2Y-5800 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2Y-5800 PUMP GP-FUEL INJECTION
2Y-5800 PUMP GP-FUEL INJECTION
 

#ZEBP13940100
 

2Y-5800: PUMP GP-FUEL INJECTION

2Y5800 GOVERNOR & FUEL INJECTION PUMP GP-PART 1 OF 2
S/N 60Z4322-4449
PART OF 2Y5716, 2Y8994, 5Y1156 GOVERNOR & FUEL INJECTION PUMP
c410868 ZEBP1394
2Y5800 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5880 M [2] BOLT  
  2Y-5881 [2] LOCKWASHER  
2. 2Y-5861 B [3] SHIM .10MM(.003IN.)THK  
  2Y-5862 B [3] SHIM .12MM(.004IN.)THK  
  2Y-5863 B [3] SHIM .14MM(.005IN.)THK  
  2Y-5864 B [3] SHIM .16MM(.006IN.)THK  
  2Y-5865 B [3] SHIM .18MM(.007IN.)THK  
  2Y-5866 B [3] SHIM .30MM(.011IN.)THK  
  2Y-5867 B [3] SHIM .50MM(.019IN.)THK  
3. 2Y-5810 [1] HOUSING  
4. 2Y-5843 M [1] BOLT  
  2Y-5844 [1] GASKET  
5. 2Y-5841 [1] ADAPTER  
  2Y-5842 J [1] GASKET  
6. 2Y-5840 [1] VALVE  
7. 2Y-5882 [1] ELBOW  
8. 2Y-5830 [2] GUIDE  
  2Y-5832 [1] PIN  
9. 2Y-5833 [1] RING  
10. 2Y-5847 B [3] SHIM 1.2MM(.047IN.)THK  
  2Y-5848 B [3] SHIM 1.5MM(.059IN.)THK  
  2Y-5849 B [3] SHIM 1.8MM(.070IN.)THK  
  2Y-5850 B [3] SHIM 2.0MM(.078IN.)THK  
11. 2Y-5845 [1] BUSHING  
12. 2Y-5857 [2] BEARING  
13. 2Y-5854 [1] BEARING  
14. 2Y-5855 M [2] BOLT  
15. 2Y-5852 [9] LOCKWASHER  
16. 2Y-5851 M [4] BOLT  
17. 2Y-5879 [1] SLEEVE  
18. 2Y-5859 J [1] SEAL  
19. 2Y-5860 J [1] SEAL  
20. 2Y-5858 [1] ADAPTER  
21. 2Y-5873 M [3] STUD  
  2Y-5874 M [3] NUT  
  2Y-5876 J [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#ZEBP13940101
 

2Y-5800: PUMP GP-FUEL INJECTION

2Y5800 GOVERNOR & FUEL INJECTION PUMP GP-PART 2 OF 2
S/N 60Z4322-4449
2Y6158-PAGE 44
PART OF 2Y5716, 2Y8994, 5Y1156 GOVERNOR & FUEL INJECTION PUMP
c407847 ZEBP1394
2Y5800 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5823 J [6] SEAL  
2. 2Y-5827 [12] WASHER  
3. 2Y-5829 M [12] NUT  
  2Y-5828 [12] LOCKWASHER  
4. 2Y-5826 M [12] STUD  
5. 2Y-5813 [6] BONNET  
6. 2Y-5815 [6] SPRING  
  2Y-5814 [6] GUIDE  
7. 2Y-5818 J [6] SEAL  
8. 2Y-5811 [6] BUSHING AS  
9. 2Y-6158 Y [1] SHIM GP  
10. 2Y-5817 [6] VALVE AS  
  2Y-5816 J [6] GASKET  
11. 2Y-5819 J [6] WASHER  
12. 2Y-5820 [6] BAFFLE  
13. 2Y-5812 [6] PUMP  
14. 2Y-5831 [1] BAR  
15. 2Y-5836 [6] SEAT  
16. 2Y-5834 [6] SLEEVE  
17. 2Y-5871 [1] PLUG  
18. 2Y-5872 [1] GASKET  
19. 2Y-5853 [1] CAMSHAFT  
20. 2Y-8422 C [12] SCREW  
21. 2Y-5868 [1] COVER  
  2Y-5869 J [1] GASKET  
22. 2Y-5878 J [6] GASKET  
23. 2Y-5877 [6] PLUG  
24. 2Y-5839 [6] LIFTER AS  
25. 2Y-5838 [6] SEAT  
26. 2Y-5837 [6] SPRING  
27. 2Y-5822 J [12] SEAL  
28. 2Y-5821 J [6] RING  
    THE FOLLOWING REPAIR
    KIT IS AVAILABLE:
  [1] KIT-FUEL INJECTION PUMP  
    (INCLUDES PARTS MARKED
    J IN PARTS 1 AND 2)
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#ZEBP13940102
 

2Y-5800: PUMP GP-FUEL INJECTION

2Y5800 PUMP GP-FUEL INJECTION-PART 1 OF 2
S/N 60Z4450-UP
PART OF 2Y5716, 2Y8994, 5Y1156 GOVERNOR & FUEL INJECTION PUMP
c495323 ZEBP1394
2Y5800 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5880 M [2] BOLT  
  2Y-5881 [2] LOCKWASHER  
2. 2Y-5861 B [3] SHIM .10MM(.003IN.)THK  
  2Y-5862 B [3] SHIM .12MM(.004IN.)THK  
  2Y-5863 B [3] SHIM .14MM(.005IN.)THK  
  2Y-5864 B [3] SHIM .16MM(.006IN.)THK  
  2Y-5865 B [3] SHIM .18MM(.007IN.)THK  
  2Y-5866 B [3] SHIM .30MM(.011IN.)THK  
  2Y-5867 B [3] SHIM .50MM(.019IN.)THK  
3. 2Y-5810 [1] HOUSING  
4. 2Y-5843 M [1] BOLT  
  2Y-5844 [1] GASKET  
5. 2Y-5841 [1] ADAPTER  
  2Y-5842 [1] GASKET  
6. 2Y-5840 [1] VALVE  
7. 2Y-5882 [1] ELBOW  
8. 2Y-5830 [2] GUIDE  
  2Y-5832 [1] PIN  
9. 2Y-5833 [1] RING  
10. 2Y-5847 B [3] SHIM 1.2MM(.047IN.)THK  
  2Y-5848 B [3] SHIM 1.5MM(.059IN.)THK  
  2Y-5849 B [3] SHIM 1.8MM(.070IN.)THK  
  2Y-5850 B [3] SHIM 2.0MM(.078IN.)THK  
11. 2Y-5845 [1] BUSHING  
12. 2Y-5857 [2] BEARING  
13. 2Y-5854 [1] BEARING  
14. 2Y-5855 M [2] BOLT  
15. 2Y-5852 [9] LOCKWASHER  
16. 2Y-5851 M [4] BOLT  
17. 2Y-5879 [1] SLEEVE  
18. 2Y-5859 J [1] SEAL  
19. 2Y-5860 J [1] SEAL  
20. 2Y-5858 [1] ADAPTER  
21. 2Y-5873 M [3] STUD  
  2Y-5874 M [3] NUT  
  2Y-5876 J [1] GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#ZEBP13940103
 

2Y-5800: PUMP GP-FUEL INJECTION

2Y5800 PUMP GP-FUEL INJECTION-PART 2 OF 2
S/N 60Z4450-UP
2Y6158-PAGE 44
PART OF 2Y5716, 2Y8994, 5Y1156 GOVERNOR & FUEL INJECTION PUMP
c495324 ZEBP1394
2Y5800 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-8378 [6] SEAL-O-RING  
  2Y-5823 J [6] SEAL  
2. 2Y-5827 [12] WASHER  
3. 2Y-5829 M [12] NUT  
  2Y-5828 [12] LOCKWASHER  
4. 2Y-5826 M [12] STUD  
5. 2Y-5813 [6] BONNET  
6. 2Y-5815 [6] SPRING  
  2Y-5814 [6] GUIDE  
7. 2Y-5818 J [6] SEAL  
8. 2Y-5811 [6] BUSHING AS  
9. 2Y-6158 Y [1] SHIM GP  
10. 2Y-5817 [6] VALVE AS  
  2Y-5816 J [6] GASKET  
11. 2Y-5819 [6] WASHER  
12. 2Y-5820 [6] BAFFLE  
13. 2Y-5812 [6] PUMP  
14. 2Y-5831 [1] BAR  
15. 2Y-5836 [6] SEAT  
16. 2Y-5834 [6] SLEEVE  
17. 2Y-5871 [1] PLUG  
18. 2Y-5872 [1] GASKET  
19. 2Y-5853 [1] CAMSHAFT  
20. 2Y-8422 M [12] SCREW  
21. 2Y-5868 [1] COVER  
  2Y-5869 J [1] GASKET  
22. 2Y-5878 J [6] GASKET  
23. 2Y-5877 [6] PLUG  
24. 2Y-5839 [6] LIFTER AS  
25. 2Y-5838 [6] SEAT  
26. 2Y-5837 [6] SPRING  
27. 2Y-5822 J [12] SEAL  
28. 2Y-5821 J [6] RING  
   
   
    KIT IS AVAILABLE:
  [1] KIT-FUEL INJECTION PUMP  
    (INCLUDES PARTS MARKED
    J IN PARTS 1 AND 2)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#ZEBP13940104
 

2Y-5708: LINES GP-FUEL INJECTION

2Y5708 FUEL INJECTION LINES & MOUNTING GP
ENGINE S/N 60Z1-2217
2Y5709-PAGE 49
c237544 ZEBP1394
2Y5708 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-1268 [1] ELBOW  
2. 2Y-5171 [1] TUBE ASSEM.  
3. 2Y-5170 [1] TUBE ASSEM.  
4. 030-7947 [2] ELBOW  
5. 8M-1584 [6] VALVE SERVICE GROUP  
    (Each Includes)
6. 6F-1069 [1] SEAL ASSEM.  
7. 5B-3718 [1] SEAL  
8. 8S-2389 [6] BODY  
9. 5H-7225 [6] NUT  
10. 2Y-5709 Y [1] LINES GROUP  
    (Separate Illustration)
11. 2H-3934 [1] SEAL  
12. 1B-4203 [3] NUT  
13. 032-1267 [1] CONNECTOR  
14. 2Y-5731 [1] BLOCK  
15. 0S-1617 [2] BOLT  
  9M-1974 [2] WASHER  
16. 5P-8247 [1] WASHER  
17. 0S-1624 [1] BOLT  
  1A-2812 [2] WASHER  
18. 2Y-6101 [1] BRACKET ASSEM.  
19. 0S-1619 [2] BOLT  
20. 5M-2894 [5] WASHER  
21. 5M-6214 [1] PLUG  
22. 4N-4057 [1] ADAPTER  
23. 8M-5253 [1] SEAL  
24. 1A-2029 [1] BOLT  
25. 3J-5389 [1] PLUG  
26. 8M-5248 [1] SEAL  
27. 0S-0509 C [3] BOLT  
  1D-4717 C [3] NUT  
28. 4D-9786 C [3] BLOCK  
29. 2S-2176 C [3] CLAMP  
30. 0L-1352 C [2] BOLT  
31. 3J-1907 C [2] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP13940105
 

2Y-5708: LINES GP-FUEL INJECTION

2Y5708 FUEL INJECTION LINES & MOUNTING GP
TYPE 1. ENGINE S/N 60Z2218-UP
2Y5709-PAGE 49
c521778 ZEBP1394
2Y5708 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-1268 [2] ELBOW  
2. 2Y-7217 C [1] TUBE AS  
3. 2Y-7218 C [1] TUBE AS  
4. 030-7947 C [1] ELBOW  
5. 8M-1584 [6] VALVE SERVICE GP-FUEL  
    (EACH INCLUDES)
6. 6F-1069 [1] SEAL AS-VALVE  
7. 5B-3718 [1] SEAL-O-RING  
8. 8S-2389 [6] BODY-FUEL VALVE  
9. 5H-7225 [6] NUT-RETAINER  
10. 2Y-5709 Y [1] LINES GP  
11. 2H-3924 [1] LOCKWASHER  
12. 1B-4203 [3] NUT-FULL  
13. 1D-4717 C [5] NUT  
14. 2Y-8430 C [1] BLOCK AS  
15. 0S-1617 [2] BOLT  
  9M-1974 [2] WASHER  
16. 5P-8247 [1] WASHER-HARD  
17. 0S-1624 [1] BOLT  
  1A-2812 [2] WASHER  
18. 2Y-6101 [1] BRACKET AS  
19. 0S-1619 [2] BOLT  
20. 5M-2894 [5] WASHER  
21. 5M-6214 [1] PLUG-PIPE  
22. 4N-4057 [1] ADAPTER  
23. 8M-5253 [1] SEAL  
24. 1A-2029 [1] BOLT  
25. 4B-4278 C [2] WASHER  
26. 8M-5248 [1] SEAL-O-RING  
27. 0S-0509 [3] BOLT  
28. 4D-9786 [3] BLOCK  
29. 2S-2176 [3] CLAMP  
30. 3J-1907 [2] SEAL  
31. 030-7942 C [1] ELBOW  
32. 3J-5389 [1] PLUG  
33. 2Y-7985 [1] BLOCK  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP13940106
 

2Y-5708: LINES GP-FUEL INJECTION

2Y5708 LINES GP-FUEL INJECTION
TYPE 2. ENGINE S/N 60Z2218-UP
2Y5709-PAGE 49
c521765 ZEBP1394
2Y5708 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-1268 [1] ELBOW  
2. 5Y-1333 I [1] HOSE AS  
3. 5Y-1334 I [1] HOSE AS  
4. 030-7947 [1] ELBOW  
5. 8M-1584 [6] VALVE SERVICE GP-FUEL  
    (EACH INCLUDES)
6. 6F-1069 [1] SEAL AS-VALVE  
7. 5B-3718 [1] SEAL-O-RING  
8. 8S-2389 [6] BODY-FUEL VALVE  
9. 5H-7225 [6] NUT-RETAINER  
10. 2Y-5709 Y [1] LINES GP  
11. 2H-3924 [1] LOCKWASHER  
12. 1B-4203 [3] NUT-FULL  
13. 1D-4717 C [2] NUT  
14. 2Y-8430 C [1] BLOCK AS  
15. 0S-1617 [2] BOLT  
  5P-4116 [2] WASHER  
16. 5P-8247 [1] WASHER-HARD  
17. 0S-1624 [1] BOLT  
  1A-2812 [2] WASHER  
18. 2Y-6101 [1] BRACKET AS  
19. 0S-1619 [2] BOLT  
20. 5M-2894 [5] WASHER  
21. 5M-6214 [1] PLUG-PIPE  
22. 4N-4057 [1] ADAPTER  
23. 8M-5253 [1] SEAL  
24. 1A-2029 [1] BOLT  
25. 8L-8413 [2] STRAP-CABLE  
26. 8M-5248 [1] SEAL-O-RING  
27. 3J-1907 [2] SEAL  
28. 030-7942 C [1] ELBOW  
29. 3J-5389 [1] PLUG  
30. 2Y-7985 [1] BLOCK  
31. 001-6498 C [1] ELBOW-FLARED  
  C   CHANGE FROM PREVIOUS TYPE
  I   SEE HOSE FABRICATION GUIDE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP13940107
 

2Y-5709: LINES GP-FUEL INJECTION

2Y5709 FUEL INJECTION LINES GROUP
PART OF 2Y5708 FUEL INJECTION LINES GROUP SHOWN ON PAGE 48
c233841 ZEBP1394
2Y5709 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5725 [1] LINE ASSEM. (No. 5)  
2. 2Y-5724 [1] LINE ASSEM. (No. 4)  
3. 6N-6403 [13] CLAMP (tapped)  
4. 6N-6404 [11] CLAMP  
5. 6H-9954 [14] MACHINE SCREW ASSEM.  
7. 2Y-5722 [1] LINE ASSEM. (No. 2)  
7. 2Y-5721 [1] LINE ASSEM. (No. 1)  
8. 2Y-5723 [1] LINE ASSEM. (No. 3)  
9. 8N-9809 [1] CLAMP (tapped)  
  8N-9810 [1] CLAMP  
10. 7N-4156 [1] CLAMP ASSEM.  
11. 2Y-5726 [1] LINE ASSEM. (No. 6)  
 

#ZEBP13940108
 

2Y-5907: LINES GP-FUEL

2Y5907 LINES GP-FUEL
S/N 32C100-1408
c236301 ZEBP1394
2Y5907 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9246 [2] CONNECTOR-FLARED  
2. 1V-3546 [6] COUPLING-BARBED  
3. 032-1268 [1] ELBOW  
4. 2Y-5975 [2] COUPLING  
5. 5P-1520 E HOSE 105 CM(41.4 IN.)  
6. 5P-1520 E HOSE 115 CM(45.3 IN.)  
7. 5P-1520 E HOSE 140 CM(55.2 IN.)  
8. 5P-1520 E HOSE 160 CM(63 IN.)  
9. 7K-4129 [1] UNION-FLARED  
10. 2S-2176 [1] CLAMP  
11. 0S-0509 [1] BOLT  
12. 4D-9786 [1] BLOCK  
13. 3B-4506 [1] LOCKWASHER  
14. 1D-4717 [1] NUT  
15. 2Y-6612 [1] TUBE AS  
16. 5K-9235 [1] ELBOW-FLARED  
17. 3S-2093 [9] STRAP-CABLE  
18. 4D-3631 [2] CLIP  
19. 9M-8406 [3] CLIP  
20. 5K-9988 [1] TEE-INVERTER FLARED  
  E   ORDER BY THE CENTIMETER
 

#ZEBP13940109
 

2Y-5907: LINES GP-FUEL

2Y5907 LINES GP-FUEL
S/N 32C1409-UP
c477625 ZEBP1394
2Y5907 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120B MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9246 [2] CONNECTOR-FLARED  
2. 1V-3546 [6] COUPLING-BARBED  
3. 032-1268 [1] ELBOW  
4. 2Y-5975 [2] COUPLING  
5. 5P-1442 E HOSE (105CM)  
6. 5P-1442 E HOSE (115CM)  
7. 5P-1442 E HOSE (140CM)  
8. 5P-1442 E HOSE (160CM)  
9. 7K-4129 [1] UNION-FLARED  
10. 7B-9919 C [1] CLIP  
11. 0S-0509 [1] BOLT  
12. 5K-9988 [1] TEE-INVERTER FLARED  
13. 5M-2894 C [1] WASHER  
14. 1D-4717 [1] NUT  
15. 2Y-6612 [1] TUBE AS  
16. 5K-9235 [1] ELBOW-FLARED  
17. 3S-2093 [9] STRAP-CABLE  
18. 7K-1181 [2] STRAP-CABLE  
19. 6D-4246 [3] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Fuel Transfer Pump
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Barrel Assembly O-Ring Seals
SUPPLEMENT FOR 3306 ENGINE FUEL SYSTEM
Fuel Injection Pump And Governor
SUPPLEMENT FOR 3306 ENGINE FUEL SYSTEM
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Fuel Transfer Pump
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Fuel Injection Pumps
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Fuel Check Valve And Bypass Valve
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Governor
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Fuel Injection Pump Housing
3306 VEHICULAR ENGINE FOR 120B MOTOR GRADER
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01

Caterpillar Parts SIS Catalog 120B :

LINES GP-LUBE OIL
2Y-5712 LINES GP-LUBE OIL
RACK SETTING GP
2Y-6133 RACK SETTING GP
LINES GP-LUBE OIL
2Y-5712 LINES GP-LUBE OIL
2Y-6158 SHIM GP
FLYWEIGHT GP
2Y-8980 FLYWEIGHT GP
FLYWEIGHT GP
2Y-6518 FLYWEIGHT GP
GOVERNOR GP
2Y-6105 GOVERNOR GP
COVER GP-GOVERNOR & DETENT
2Y-8982 COVER GP-GOVERNOR & DETENT
2Y-5800 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
2Y-5800 PUMP GP-FUEL INJECTION
2Y-5800 PUMP GP-FUEL INJECTION
LINES GP-FUEL INJECTION
2Y-5708 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
2Y-5708 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
2Y-5708 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
2Y-5709 LINES GP-FUEL INJECTION
LINES GP-FUEL
2Y-5907 LINES GP-FUEL

Truck sale:

CATERPILLAR 120B 1978
$17,572 USD 
CATERPILLAR 120B 1978
- MOTOR GRADERS
PESA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.