D6D TRACTOR-SPECIAL APPLICATION / DIRECT DRIVE / 19B00400-UP (MACHINE) POWERED BY 3306 ENGINE UNDERCARRIAGE Caterpillar SIS

Specifications

Equalizer Bar
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Reuse And Salvage Guidelines

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Disassembly and Assembly

Equalizer Bar
D6D TRACTOR POWER TRAIN

Special Instruction

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Technical Information Bulletin

Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Specifications

Front Idlers And Recoil Springs
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Track Adjustment
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Undercarriage Reconditioning Bulletin

Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}

Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}

Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}

Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reuse And Salvage Guidelines

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Disassembly and Assembly

Front Idlers
D6D TRACTOR POWER TRAIN

Front Idler Yokes
D6D TRACTOR POWER TRAIN

Hydraulic Track Adjusters
D6D TRACTOR POWER TRAIN

Recoil Springs
D6D TRACTOR POWER TRAIN

Service Magazine

Use Cork Plugs To Keep Bearing Blocks Clean In Rebuilt Idlers{4159}
1985/06/10

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18

Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}

Technical Information Bulletin

POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS
POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Undercarriage Reconditioning Bulletin

Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}

Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Service Magazine

Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/06/07

Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}

Technical Information Bulletin

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Specifications

Track Carrier Rollers (9S2730)
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Track Rollers (5M4446 and 9S9403 Single Flange), (5M4447 and 9S9404 Double Flange)
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

Undercarriage Reconditioning Bulletin

Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}

Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}

Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}

Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}

Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}

Oval Track Roller Disassembly and Assembly Procedures {4180}
Oval Track Roller Disassembly and Assembly Procedures {4180}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}

Disassembly and Assembly

Track Carrier Rollers
D6D TRACTOR POWER TRAIN

Track Rollers
D6D TRACTOR POWER TRAIN

Service Magazine

Carrier Roller Replacement Rims Now Available{4154}
1984/03/12

New Track Carrier Roller Brackets Reduce Track Slapping{4154,4170}
1987/07/06

New Caterpillar Extended Life Track Roller Groups Available{4180}
1990/10/15

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05

Instructions for Filling the Oil of Nexus and Classic Carrier Roller and Idler {4154, 4159}
2004/08/16

Oil for Arctic Track Rollers and Idlers Has Changed from SAE 5W40 to SAE 0W40 {0645, 4159, 4180, 7000}
2011/08/10

Track-Type Tractor Track Roller Cap Bolt Torque Procedure And Re-Use Guidelines {4180}
2015/05/11

Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}

Undercarriage Reconditioning Bulletin

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Specifications

Front Idlers And Recoil Springs
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Service Magazine

New Caterpillar Extended Life Track Roller Groups Available{4180}
1990/10/15

Specifications

Front Idlers And Recoil Springs
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Track Adjustment
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Reuse And Salvage Guidelines

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Service Magazine

New Caterpillar Extended Life Track Roller Groups Available{4180}
1990/10/15

Special Instruction

Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}

Technical Information Bulletin

Inspect Track Seal Load Rings
Inspect Track Seal Load Rings

POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS
POSSIBLE CRACKING OF SALT (Sealed And Lubricated Track) LINK ASSEMBLY TRACK PINS

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Faulty Threaded Rod Used On Made To Order Track Groups{4170}
Faulty Threaded Rod Used On Made To Order Track Groups{4170}

Specifications

Track
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Track Adjustment
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Tool Operating Manual

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Oil Volumes for Track Link Assemblies {4169}
Oil Volumes for Track Link Assemblies {4169}

Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}
Shop Repair Procedure for Non-PPR Sealed and Lubricated Track {4170}

Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}

Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}

Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}

Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}

Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}

Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}

Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}
Reusability Guidelines and Installation Procedures for Split Master Links {4170, 4176}

Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}

Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}

Reuse And Salvage Guidelines

Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}

Disassembly and Assembly

Track Carrier Rollers
D6D TRACTOR POWER TRAIN

Track Rollers
D6D TRACTOR POWER TRAIN

Tracks
D6D TRACTOR POWER TRAIN

Service Magazine

Use The 6V2002 Socket To Remove Or Install Worn Track Bolts{0612}
1980/02/25

New Track Carrier Roller Brackets Reduce Track Slapping{4154,4170}
1987/07/06

New Moderate And Extreme Service Track Shoes Available for D6C And D6D Tractors{4172}
1990/10/15

New Caterpillar Extended Life Track Roller Groups Available{4180}
1990/10/15

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27

Track Seal Temperature Guidelines {4169, 4170, 4171}
2012/06/07

Best Practices To Reduce Track Idler Flat Spotting {4159, 4170}
2014/11/18

Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}
Track Bolt Reuse Recommendation for All Track-Type Tractors and Track-Type Loaders {4169, 4170, 4171}

General Duty Link Assemblies Replace Hybrid Link Assemblies for Certain D6D, D6G Track-Type Tractors 963, 955 Track-Type Loaders {4169, 4171}
General Duty Link Assemblies Replace Hybrid Link Assemblies for Certain D6D, D6G Track-Type Tractors 963, 955 Track-Type Loaders {4169, 4171}

Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}

Technical Information Bulletin

The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators
The Use of High-Pressure Water Sprays to Clean the Undercarriage Can Result in Damage to Undercarriage Components on Track Type Tractors, Track Type Loaders and Excavators

Tool Operating Manual

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}

Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}

Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}

Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}

Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}

Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}

Reuse And Salvage Guidelines

Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Special Instruction

Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}

Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}

Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}

Undercarriage Reconditioning Bulletin

Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}

Truck Engine News

New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27

Tool Operating Manual

142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}

Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}

362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}

TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}

168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}

NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}

Undercarriage Reconditioning Bulletin

Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}
Removal, Installation, and Conditioning of Idler Bearings and Track Roller Bearings {4159, 4159, 4180, 4180, 7551}

Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}

Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}

Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}

Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}

Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}
Track Seal Installers and Track Bushing Groove Gauges for Rigid Track Seals {0729, 4150, 7450, 7555}

Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}
Field Servicing Procedure for Non-Positive Pin Retention Sealed and Lubricated Track {0729, 4169, 4170}

Service Magazine

Caterpillar Idler Welder Handles Track Idlers, Track Rollers and Railroad Rims {0679}
2004/05/24

Cat Roller Assembly Machine Simplifies Both Disassembly of the Track Rollers and Carrier Rollers and Assembly of the Track Rollers and Carrier Rollers {0685}
2004/07/05

Cat Track Torque Wrench is Available for the Removal of Track Bolts and for the Installation of Track Bolts {0729, 0765}
2004/12/27

Two New Track Presses Are Now Available {0700, 0729}
2004/12/27

Specifications

Alignment Of Track Roller Frame
D6D SPECIAL APPLICATION TRACTOR POWER TRAIN

Tool Operating Manual

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

Undercarriage Reconditioning Bulletin

Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}

Reuse And Salvage Guidelines

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Disassembly and Assembly

Track Roller Frames
D6D TRACTOR POWER TRAIN

Service Magazine

Use Hard Surface Welds For Repair Of Worn And/Or Broken Idler Wear Strips {4168,4160,4159,0662}
1981/03/23

Tool Operating Manual

Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}
Undercarriage Spring Disassembly and Assembly Bench{0374, 0599, 0700, 0729}

Reuse And Salvage Guidelines

Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}
Thermal Spray Procedures for TTT Bearing Sleeves{0599, 0679, 4151, 4153, 4157, 4158, 4159, 4169, 4171, 7206}

Special Instruction

Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}
Guidelines for Effective Track Frame Guarding to Reduce Packing and Sprocket Indexing{4150}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Reuse And Salvage Guidelines

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Magazine

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

D6D TRACTOR-SPECIAL APPLICATION / DIRECT DRIVE / 19B00400-UP (MACHINE) POWERED BY 3306 ENGINE UNDERCARRIAGE Caterpillar SIS

Parts group D6D:

Information:

Truck sale: