AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N5227 PUMP GP-GOV & FUEL INJECTION-FIELD INSTALLATION*R ENGINE S/N 47V17086-UP PROVIDES FIELD REPLACEMENT FOR 6N7601 D6D


FUEL SYSTEM
GOVERNOR GP

TRACK-TYPE TRACTOR D6D TRACK-TYPE TRACTOR 19B
 D6D TRACTOR-SPECIAL APPLICATION / DIRECT DRIVE / 19B00400-UP (MACHINE) POWERED BY 3306 ENGINE ZEBP1424 D6D 19B   (1985)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GP
6N-0301 GOVERNOR AND FUEL INJECTION PUMP GP
6N-5227 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-0261 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5228 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
 

#ZEBP14240140
 

6N-5227: PUMP GP-GOV & FUEL INJ

6N5227 PUMP GP-GOV & FUEL INJECTION-FIELD INSTALLATION*R
ENGINE S/N 47V17086-UP
PROVIDES FIELD REPLACEMENT FOR 6N7601
ZEBP14240140 ZEBP1424
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6N-5228 [1] GOVERNOR & FUEL INJECTION PUMP GP  
    FORM SMHS6728
 

#ZEBP14240141
 

6N-0261: PUMP GP-GOV & FUEL INJ

6N261 GOVERNOR AND FURL INJECTION PUMP GP
4N1836-PAGE 50
PART OF 6N301 GOVERNOR & FUEL INJECTION PUMP
c212672 ZEBP1424
6N0261 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG  
2. 4N-1836 RY [1] PUMP GROUP  
    (Separate Illustration)
3. 0S-1615 [13] BOLT  
4. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
5. 4N-4351 [1] COVER  
  4N-9057 [1] GASKET  
6. 4N-8179 [1] PIN  
7. 4N-4366 [1] SPRING  
8. 4N-0444 [2] SPACER  
9. 4N-4320 [1] SHAFT ASSEM.  
10. 4N-0159 [1] GASKET  
11. 3J-1907 [1] SEAL  
12. 8S-4710 [3] BOLT  
13. 4N-0053 [1] COVER  
14. 0S-1616 [1] BOLT  
25. 4N-5490 [1] BASE ASSEM.  
    (Includes)
26. 9S-4167 [1] STUD  
27. 4N-9336 [1] DISC  
28. 4N-7572 [1] ELBOW  
  4N-9337 [1] GASKET  
29. 6N-2843 [1] GASKET  
30. 7N-0450 C [1] VALVE ASSEM.  
31. 9F-7022 [1] BOLT  
32. 9F-6580 [2] BOLT 2.86 cm(1.125 in.) long  
33. 4N-4431 [1] GASKET  
  6N-2810 [1] CHANNEL  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#ZEBP14240142
 

6N-5228: PUMP GP-GOV & FUEL INJ

6N5228 PUMP GP-GOV & FUEL INJECTION
6N5355-PAGE46,6N509-PAGE 56
PART OF 6N5227 GOVERNOR & FUEL INJECTION PUMP
c212674 ZEBP1424
6N5228 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-0450 C [1] VALVE ASSEM.  
2. 6N-5355 Y [1] FUEL INJECTION PUMP GROUP  
    (Separate Illustration)
3. 0S-1615 [10] BOLT  
4. 9S-4180 [1] PLUG (drain)  
  4J-7533 [1] SEAL  
5. 4N-9339 [1] COVER  
  4N-9057 [1] GASKET  
6. 4N-8179 [1] PIN  
7. 6N-5170 [1] SPRING  
8. 4N-0444 [2] SPACER  
9. 4N-4320 [1] SHAFT ASSEM.  
10. 4N-4366 [1] SPRING  
11. 8S-4710 [2] BOLT  
12. 4N-0053 [1] COVER  
13. 0S-1616 [1] BOLT  
14. 4N-0159 [1] GASKET  
15. 6N-0509 Y [1] CONTROL GROUP  
    (Separate Illustration)
16. 4N-0443 [1] PIN  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14240143
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJ-PART 1 OF 4
PART OF 6N5228 GOVERNOR & FUEL INJECTION PUMP
c684876 ZEBP1424
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 [1] HOUSING AS-GOVERNOR  
2. 4N-2333 [1] PIN-SPRING  
3. 8S-6814 [2] PIN  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL-LIP  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL-LIP  
8. 6N-5323 [1] GUIDE-SPRING SEAT  
9. 9S-4180 C [1] PLUG-O-RING (5/16-24 THD)  
  4J-7533 C [1] SEAL-O-RING (6.07MM ID)  
10. 4N-2927 [2] RACE-THRUST BEARING  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 4N-4313 [1] CAMSHAFT-FUEL PUMP  
14. 4N-2955 [3] BOLT-SOCKET HEAD  
15. 4N-2953 [1] LOCKRING  
16. 7M-7219 [1] BEARING-THRUST  
17. 4N-0434 [1] RISER-GOVERNOR  
18. 4N-9018 [1] SHAFT-CARRIER  
19. 4N-9019 [1] DOWEL  
20. 4N-0572 [1] SHAFT AS-CONTROL  
21. 5M-6509 [1] SEAL-O-RING (66.34MM ID)  
22. 4N-0406 [1] GEAR-PUMP (10 TEETH)  
23. 9L-6863 C [1] BODY AS-TRANSFER PUMP  
24. 8H-9804 [1] SHAFT-PUMP IDLER  
25. 4N-0636 [1] SEAL-LIP  
26. 4N-1584 [1] SEAL-LIP  
27. 8S-6814 [1] PIN  
28. 4N-5050 [1] PLUG  
29. 4N-0429 [1] GEAR-PUMP (15 TEETH)  
30. 4N-0527 [1] SPRING  
31. 6N-2957 [1] WASHER  
32. 6N-2956 [1] WASHER-SPRING  
33. 4N-0927 [1] SHAFT AS-SHUTOFF  
34. 4N-1723 [1] SHIELD-CARRIER  
35. 6N-4655 C [1] DASHPOT AS  
36. 4N-6407 [1] SPOOL-DASHPOT  
37. 4N-6406 [1] RING-SPACER  
38. 4N-6404 [1] RING-RETAINING  
39. 4N-0425 [3] WEIGHT-GOVERNOR  
40. 4N-3779 [1] KEY-CAMSHAFT  
41. 6N-7451 [1] SEAT-SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14240144
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJ-PART 2 OF 4
PART OF 6N5228 GOVERNOR & FUEL INJECTION PUMP
c684880 ZEBP1424
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN-TIMING  
2. 6N-1347 C [1] HOUSING AS-PUMP  
3. 4N-5481 C [1] STUD  
4. 4N-2333 [1] PIN-SPRING  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL-O-RING (6.07MM ID)  
7. 1P-2298 [1] VALVE AS  
8. 6N-5325 [6] PIN-SPRING  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE-IDLE SCREW  
11. 5J-5314 [4] BOLT (5/16-18X1.5IN)  
12. 4N-2954 [1] SLEEVE-CAMSHAFT  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT (5/16-18 THD)  
15. 1P-2497 [2] BOLT-HEAD  
16. 4N-5578 C [1] COVER-IDLE SCREW  
  4N-0049 [1] GASKET-COVER  
17. 1P-9925 [1] BOLT (1/4-20X2.5IN)  
  6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET-GOVERNOR HOUSING  
19. 1P-9925 [1] BOLT (1/4-20X2.5IN)  
  2A-4781 [1] BOLT (1/4-20X2.75IN)  
  3B-8695 [1] BOLT (1/4-20X3.5IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14240145
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJ-PART 3 OF 4
PART OF 6N5228 GOVERNOR AND FUEL INJECTION PUMP
c684877 ZEBP1424
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [6] BONNET-VALVE  
2. 7W-8120 [6] BUSHING-TERMINAL  
3. 9B-1320 [6] VALVE-CHECK  
  9L-9424 [6] SPRING-VALVE  
4. 4N-0224 [6] RING-RETAINER  
5. 4N-1765 [6] PLUNGER AS  
6. 4N-4318 [6] SPRING-LIFTER  
7. 4N-2728 [6] WASHER-RETAINER  
8. 4N-1750 [6] LIFTER-PLUNGER  
  4N-2685 [6] ROLLER-LIFTER  
9. 2N-2658 [6] BOLT-SOCKET HEAD  
10. 4N-1763 [6] LEVER-CONTROL  
11. 4N-0528 [1] SHAFT-LEVER  
12. 4N-2677 [1] LEVER AS-RISER  
13. 2M-7819 [1] RING-RETAINING  
14. 3H-0442 [1] SEAL-O-RING (3.68MM ID)  
15. 4N-0508 [1] GASKET-COVER  
16. 4N-0445 [1] LEVER-LOAD STOP  
17. 4N-1591 [1] COVER AS-SPRING HOUSING  
  6N-0411 [1] COVER-TORQUE SPRING  
18. 6N-0412 C [1] SCREW AS-MACHINE  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER (4.42MM ID)  
  1P-7326 [1] WASHER (1.52MM THK)  
  8F-1326 [1] WASHER (0.8MM THK)  
19. 2P-3200 C [1] BOLT-WASHER HEAD  
  1J-9671 C [1] SEAL-O-RING (10.52MM ID)  
20. 2M-5471 [2] BOLT  
21. 4N-0523 [1] DOWEL-STOP SUPPORT  
  2D-6392 [1] SEAL-O-RING (6.07MM ID)  
22. 4N-0223 [6] SEAL-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14240146
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJ-PART 4 OF 4
PART OF 6N5228 GOVERNOR & FUEL INJECTION PUMP
c684881 ZEBP1424
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER-SEAT  
2. 4N-0448 [1] LEVER AS-SHUTOFF  
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 6N-5482 C [2] PLATE-FRICTION  
5. 4N-0687 [1] COVER AS-CONTROL  
6. 4N-2786 [1] SEAL-LIP  
7. 0S-1616 [4] BOLT (1/4-20X1 IN)  
8. 4N-0402 [1] GASKET-COVER  
9. 9S-8601 [1] PIN-LOW IDLE  
10. 4N-1767 [1] VALVE-BYPASS  
11. 4N-0605 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14240147
 

4N-1836: PUMP GP-GOV & FUEL INJ

4N1836 GOV & FUEL INJ PUMP GP-PART 1 OF 4*R
PART OF 6N261 GOVERNOR & FUEL INJECTION PUMP
c213005 ZEBP1424
4N1836 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-5324 C [1] HOUSING ASSEM.  
2. 4N-2333 [1] DOWEL  
3. 8S-6814 [2] DOWEL  
4. 4N-5050 [1] PLUG  
5. 4N-0260 [2] SEAL  
6. 6N-2578 [1] BEARING  
7. 4N-2786 [1] SEAL  
8. 9S-4180 [1] PLUG  
  4J-7533 [1] SEAL  
9. 4N-0425 [3] WEIGHT  
10. 4N-2927 [2] RACE  
11. 4N-0511 [3] DOWEL  
12. 4N-0446 [1] CARRIER  
13. 4N-4313 [1] CAMSHAFT  
14. 4N-2955 [3] BOLT  
15. 4N-2953 [1] RING  
16. 4N-2401 [1] BEARING  
17. 4N-0434 [1] RISER  
18. 4N-9018 [1] SHAFT  
19. 4N-9019 [1] DOWEL  
20. 4N-0572 [1] SHAFT ASSEM.  
21. 5M-6509 [1] SEAL  
22. 4N-0406 [1] GEAR (10 teeth)  
23. 9L-6863 C [1] BODY ASSEM.  
  4N-5050 [1] PLUG  
24. 8H-9804 [1] SHAFT  
25. 4N-0636 [1] SEAL  
26. 4N-1584 [1] SEAL  
27. 8S-6814 [1] DOWEL  
28. 4N-3779 [1] KEY  
29. 4N-0429 [1] GEAR (15 teeth)  
30. 4N-0527 [1] SPRING  
31. [1] SEAT  
32. 6N-7451 [1] SEAT  
33. 4N-0927 [1] SHAFT ASSEM.  
34. 6N-2956 [1] WASHER (spring)  
35. 6N-2957 [2] WASHER  
36. 4N-1723 [1] SHIELD  
  C   INDICATES CHANGE
 

#ZEBP14240148
 

4N-1836: PUMP GP-GOV & FUEL INJ

4N1836 GOV & FUEL INJ PUMP GP-PART 2 OF 4*R
PART OF 6N261 GOVERNOR & FUEL INJECTION PUMP
c226096 ZEBP1424
4N1836 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 6N-1347 C [1] HOUSING ASSEM.  
    (Includes)
3. 6N-0343 [1] STUD  
4. 4N-2333 [1] PIN  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL  
7. 1P-2298 [1] VALVE ASSEM.  
8. 6N-5325 [6] PIN  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [2] BOLT 6.35 cm(2.50 in.) long  
18. 4N-0594 [1] GASKET  
19. 2A-4781 [1] BOLT 6.99 cm(2.75 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.50 in.) long  
20. 6N-7523 [1] WASHER  
  C   INDICATES CHANGE
 

#ZEBP14240149
 

4N-1836: PUMP GP-GOV & FUEL INJ

4N1836 GOV & FUEL INJ PUMP GP-PART 3 OF 4*R
PART OF 6N261 GOVERNOR & FUEL INJECTION PUMP
c213007 ZEBP1424
4N1836 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your D6D TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [6] BONNET  
2. 4N-0218 [6] BUSHING  
3. 4N-2655 [6] VALVE  
  9L-9424 [6] SPRING  
4. 4N-0224 [6] RING  
5. 4N-1765 [6] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [6] SPRING  
7. 4N-2728 [6] WASHER  
8. 4N-1750 [6] LIFTER  
  4N-2685 [6] ROLLER  
9. 2N-2658 [6] SCREW  
10. 4N-1763 [6] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 4N-0445 [1] LEVER  
17. 4N-1591 [1] COVER ASSEM.  
  6N-0411 [1] COVER  
18. 6N-0412 [1] MACHINE SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52 mm(.06 in.) thick  
  8F-1326 [1] WASHER .813 mm(.032 in.) thick  
19. 2P-3200 [1] BOLT  
  1J-9671 [1] SEAL  
20. 2M-5471 [2] BOLT  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0223 [6] SEAL  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> For D5D &amp; D6D With Power Shift Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Power Shift Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Direct Drive Transmission (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Power Shift Transmission (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor and Decelerator Control <BR> (9S7053 For D7G Tractors; Power Shift) (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Power Shift Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Direct Drive Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D7G With Power Shift Transmission (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Housing<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &amp; D6D With Direct Drive Transmission
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Governor Control<BR> For D5B &&amp; D6D With Power Shift Transmission
3306 VEHICULAR ENGINE FOR D5B, D6D & D7G TRACTORS
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Transfer Pump
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Injection Pump Housing And Governor, Separation And Connection
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Governor
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Check Valve And Bypass Valve
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Fuel Injection Pumps
3306 VEHICULAR ENGINE FOR D6D TRACTORS
Governor Control
D4E, D5B & D6D TRACTORS OPERATOR'S STATION
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
Dual Horsepower Solenoids Improved{1257,1265}
1989/02/20
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog D6D :

GOVERNOR AND FUEL INJECTION PUMP GP
6N-0301 GOVERNOR AND FUEL INJECTION PUMP GP
DRIVE GP-TACHOMETER
6N-1399 DRIVE GP-TACHOMETER
MUFFLER GP
6N-8265 MUFFLER GP
MUFFLER GP
2Y-7265 MUFFLER GP
TURBOCHARGER GP
4N-8969 TURBOCHARGER GP
TURBOCHARGER GP
4N-8970 TURBOCHARGER GP
AIR CLEANER GP
6N-8267 AIR CLEANER GP
AIR CLEANER GP
6N-8262 AIR CLEANER GP
PUMP GP-GOV & FUEL INJ
6N-0261 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5228 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4N-1836 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
4N-1836 PUMP GP-GOV & FUEL INJ

Truck sale:

Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
HOLT CAT
Caterpillar D6D
 
Caterpillar D6D
- Crawler dozers
GREGORY POOLE EQUIPMENT CO.
 
25,000 
Caterpillar D6D, Crawler dozers, Construction


 
59,000 
Caterpillar D6D, Crawler dozers, Construction


Caterpillar D6D, Crawler dozers, Construction
22,417 
Caterpillar D6D, Crawler dozers, Construction

TOROMONT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.