AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N5355 PUMP GP-GOVERNOR & FUEL INJECTION-PART 2 OF 4 ENGINE S/N 47V15899-UP PART OF 6N7603 & 6N5228 PUMP-GOVERNOR & FUEL INJECTION 966C


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL INJECTION

WHEEL LOADER 966C WHEEL LOADER 18B
 966C WHEEL LOADER / POWER SHIFT / 18B00200-01265 (MACHINE) POWERED BY 3306 ENGINE ZEBP1459 966C 18B   (1984)

FUEL SYSTEM

GOVERNOR GP
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
 

#ZEBP14590150
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJECTION-PART 2 OF 4
ENGINE S/N 47V15899-UP
PART OF 6N7603 & 6N5228 PUMP-GOVERNOR & FUEL INJECTION
c226097 ZEBP1459
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6430 [1] PIN  
2. 6N-1347 C [1] HOUSING ASSEM.  
    (Includes)
3. 4N-5481 C [1] STUD  
4. 4N-2333 [1] PIN  
5. 4N-1826 [1] DOWEL  
6. 2D-6392 [1] SEAL  
7. 1P-2298 [1] VALVE ASSEM.  
8. 6N-5325 [6] PIN  
9. 9S-8632 [1] SPRING  
10. 4N-0116 [1] GUIDE  
11. 5J-5314 [4] BOLT  
12. 4N-2954 [1] SLEEVE  
13. 1P-4001 [1] FITTING  
14. 4N-0054 [1] SCREW  
  5B-3180 [1] NUT  
15. 1P-2497 [2] BOLT  
16. 4N-5578 C [1] COVER  
  4N-0049 [1] GASKET  
17. 1P-9925 [1] BOLT  
  6N-7523 C [1] WASHER  
18. 4N-0594 [1] GASKET  
19. 1P-9925 [1] BOLT 6.35 cm(2.5 in.) long  
  2A-4781 [1] BOLT 6.99 cm(2.75 in.) long  
  3B-8695 [1] BOLT 8.89 cm(3.5 in.) long  
  C   INDICATES CHANGE
 

#ZEBP14590151
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJECTION-PART 3 OF 4
ENGINE S/N 47V15899-UP
PART OF 6N7603 & 6N5228 PUMP-GOVERNOR & FUEL INJECTION
c227856 ZEBP1459
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0209 [6] BONNET  
2. 4N-0218 [6] BUSHING  
3. 9B-1320 [6] VALVE  
  9L-9424 [6] SPRING  
4. 4N-0224 [6] RING  
5. 4N-1765 [6] PLUNGER AND BARREL ASSEM.  
6. 4N-4318 [6] SPRING  
7. 4N-2728 [6] WASHER  
8. 4N-1750 [6] LIFTER  
  4N-2685 [6] ROLLER  
9. 2N-2658 [6] SCREW  
10. 4N-1763 [6] LEVER  
11. 4N-0528 [1] SHAFT  
12. 4N-2677 [1] LEVER ASSEM.  
13. 2M-7819 [1] RING  
14. 3H-0442 [1] SEAL  
15. 4N-0508 [1] GASKET  
16. 4N-0445 [1] LEVER  
17. 4N-1591 [1] COVER ASSEM.  
    (Includes)
  6N-0411 [1] COVER  
18. 6N-0412 C [1] SCREW  
  4B-2042 [1] NUT  
  3B-4501 [1] LOCKWASHER  
  1P-7326 [1] WASHER 1.52 mm(.06 in.)thick  
  8F-1326 [1] WASHER .81 mm(.032 in.)thick  
19. 2P-3200 C [1] BOLT  
  1J-9671 C [1] SEAL  
20. 2M-5471 [2] BOLT  
21. 4N-0523 [1] DOWEL  
  2D-6392 [1] SEAL  
22. 4N-0223 [6] SEAL  
  C   INDICATES CHANGE
 

#ZEBP14590152
 

6N-5355: PUMP GP-GOV & FUEL INJ

6N5355 PUMP GP-GOVERNOR & FUEL INJECTION-PART 4 OF 4
ENGINE S/N 47V15899-UP
PART OF 6N7603 & 6N5228 PUMP-GOVERNOR & FUEL INJECTION
c223580 ZEBP1459
6N5355 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1881 [1] LEVER  
2. 4N-0448 [1] LEVER ASSEM.  
    (Includes)
  9L-8571 [1] DOWEL  
3. 8F-5368 [1] WASHER  
4. 6N-5482 C [2] PLATE  
5. 4N-0687 [1] COVER ASSEM.  
    (Includes)
6. 4N-2786 [1] SEAL  
7. 0S-1616 [4] BOLT  
8. 4N-0402 [1] GASKET  
9. 9S-8601 [1] PIN  
10. 4N-1767 [1] VALVE  
11. 4N-0605 [1] SPRING  
  C   INDICATES CHANGE
 

#ZEBP14590153
 

7N-4016: LINES GP-FUEL INJECTION

7N4016 LINES GP-FUEL INJECTION
ENGINE S/N 47V15899-UP
8N9617-PAGE 55
c176836 ZEBP1459
7N4016 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8796 [6] FUEL VALVE  
2. 5B-3718 [6] SEAL  
3. 6F-1069 [6] SEAL ASSEM.  
4. 8S-2389 [6] BODY  
5. 5H-7225 [6] NUT  
6. 8N-9617 CY [1] LINES GROUP  
    (Separate Illustration)
7. 1B-4203 [3] NUT  
8. 2H-3934 [1] SEAL  
9. 2A-5546 [2] BOLT  
  5P-0537 [2] WASHER  
10. 6N-4682 [1] BRACKET  
11. 2B-2695 [2] BOLT  
  9M-1974 [2] WASHER  
12. 0S-1619 [2] BOLT  
13. 5M-2894 [3] WASHER  
14. 2P-5641 [1] ADAPTER  
15. 4D-9786 [1] BLOCK  
16. 5M-6214 [1] PLUG  
17. 8M-5253 [1] SEAL  
18. 1A-2029 [1] BOLT  
19. 8M-5248 [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14590154
 

1W-3609: LINES GP-FUEL INJECTION

1W3609 LINES GP-FUEL INJECTION
ENGINE S/N 8TD1-UP
1W3008-PAGE 54.02
c490675 ZEBP1459
1W3609 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3008 Y [1] LINES GP-FUEL INJECTION  
2. 3S-2713 C [3] NUT-FULL  
3. 6V-6921 C [1] SEAL-RING  
4. 2H-3934 [1] SEAL  
5. 5F-7054 [1] SEAL-O-RING  
6. 2H-3932 [1] SEAL  
7. 0L-2070 C [2] BOLT  
  5M-2894 C [2] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14590155
 

1W-3008: LINES GP-FUEL INJECTION

1W3008 LINES GP-FUEL INJECTION
ENGINE S/N 8TD1-2869
7C7551, 7C5553-PAGE 54.03
PART OF 1W3609 LINES
c463684 ZEBP1459
1W3008 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7005 R [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  8C-3234 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER-SEALING  
2. 7W-4486 [1] WASHER  
3. 9L-9098 [1] SEAL-CARBON STOP  
4. 1T-0416 [6] BOLT  
5. 8N-5132 [6] CLAMP-NOZZLE  
6. 1A-5183 [1] BOLT  
7. 5M-2894 [2] WASHER  
8. 7C-5551 Y [1] LINES GP-FUEL INJECTION  
9. 7C-5553 Y [1] LINES GP-FUEL INJECTION  
10. 0S-1591 [1] BOLT  
11. 8H-9204 [6] WASHER-FELT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14590156
 

1W-3008: LINES GP-FUEL INJECTION

1W3008 LINES GP-FUEL INJECTION
ENGINE S/N 8TD2870-3626
7C5553-PAGE 54.03, 4P4195-PAGE 54.04
PART OF 1W3609 LINES
c503124 ZEBP1459
1W3008 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7005 R [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  8C-3234 C [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER-SEALING  
2. 7W-4486 C [1] WASHER  
3. 9L-9098 [1] SEAL-CARBON STOP  
4. 1T-0416 [6] BOLT  
5. 8N-5132 [6] CLAMP-NOZZLE  
6. 1A-5183 [1] BOLT  
7. 5M-2894 [2] WASHER  
8. 4P-4195 Y [1] LINES GP-FUEL INJECTION  
9. 7C-5553 Y [1] LINES GP-FUEL INJECTION  
10. 0S-1591 [1] BOLT  
11. 8H-9204 [6] WASHER-FELT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14590157
 

1W-3008: LINES GP-FUEL INJECTION

1W3008 LINES GP-FUEL INJECTION
ENGINE S/N 8TD3627-UP
4P4195-PAGE 54.04, 4P1892-PAGE 54.04.01
PART OF 1W3609 LINES-FUEL INJECTION
c514741 ZEBP1459
1W3008 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-7005 R [6] NOZZLE AS-FUEL VALVE  
    (EACH INCLUDES)
  8C-3234 [1] SCREW-BUTTON HEAD  
  8T-0659 [1] WASHER-SEALING  
2. 7W-4486 [1] WASHER  
3. 9L-9098 [1] SEAL-CARBON STOP  
4. 1T-0416 [6] BOLT  
5. 8N-5132 [6] CLAMP-NOZZLE  
6. 1A-5183 [1] BOLT  
7. 5M-2894 [2] WASHER  
8. 4P-4195 Y [1] LINES GP-FUEL INJECTION  
9. 4P-1892 CY [1] LINES GP-FUEL INJECTION  
10. 0S-1591 [1] BOLT  
11. 8H-9204 [6] WASHER-FELT  
12. 2P-3200 C [1] BOLT-WASHER HEAD  
13. 4P-2578 C [1] BRACKET  
14. 1W-9169 C [1] CLAMP  
  1W-9167 C [1] CLAMP AS-FUEL LINE  
15. 9N-3388 C [1] SCREW-SELF LOCKING  
  4B-4274 C [1] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14590158
 

7C-5553: LINES GP-FUEL INJECTION

7C5553 LINES GP-FUEL INJECTION
ENGINE S/N 8TD1-3626
PART OF 1W3008 LINES-FUEL INJECTION
c404665 ZEBP1459
7C5553 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5564 [1] LINE AS-FUEL INJ  
2. 7C-5563 [1] LINE AS-FUEL INJ  
3. 7C-5562 [1] LINE AS-FUEL INJ  
4. 7C-5561 [1] LINE AS-FUEL INJ  
5. 1W-9169 [8] CLAMP (THREADED)  
6. 1W-9168 [7] CLAMP (DOUBLE LINE)  
7. 5P-4939 [7] SCREW AS-MACHINE  
8. 9N-3388 [1] SCREW-SELF LOCKING  
9. 1W-9167 [1] CLAMP AS-FUEL LINE  
    (SINGLE LINE)
  1W-9168 [1] CLAMP (DOUBLE LINE)  
10. 7C-7614 C [1] BRACKET AS  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14590159
 

7C-5551: LINES GP-FUEL INJECTION

7C5551 LINES GP-FUEL INJECTION
ENGINE S/N 8TD1-2869
PART OF 1W3008 LINES-FUEL INJECTION
c354438 ZEBP1459
7C5551 LINES GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5555 [1] LINE AS-FUEL INJ  
2. 7C-5556 [1] LINE AS-FUEL INJ  
3. 2W-0745 [1] BRACKET AS  
4. 1W-9169 [3] CLAMP (TAPPED)  
5. 1W-9168 [4] CLAMP  
6. 5P-4939 [3] SCREW AS-MACHINE  
7. 9N-3388 [1] SCREW-SELF LOCKING  
8. 1W-9167 [1] CLAMP AS-FUEL LINE  
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Disassembly and Assembly
Fuel Transfer Pump (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Fuel Injection Pump Housing And Governor (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Governor (Earlier)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Fuel Transfer Pump (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Fuel Injection Pumps (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Governor (Later)
3306 VEHICULAR ENGINE FOR 966C WHEEL LOADER
Governor Control Pedal
950 & 966C WHEEL LOADERS OPERATOR'S STATION
Governor - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Governor - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Governor Actuator Now Installed With Shock Mounting{1286}
1988/08/22
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

Caterpillar Parts SIS Catalog 966C :

PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
TORQUE CONTROL GP
1W-1597 TORQUE CONTROL GP
TORQUE CONTROL GP
8N-7276 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0581 TORQUE CONTROL GP
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
PUMP GP-GOV & FUEL INJ
6N-5228 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL INJECTION
1W-6539 PUMP GP-FUEL INJECTION
6N-5355 PUMP GP-GOV & FUEL INJ
6N-5355 PUMP GP-GOV & FUEL INJ
LINES GP-FUEL INJECTION
7N-4016 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3609 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
1W-3008 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7C-5553 LINES GP-FUEL INJECTION

Truck sale:

Caterpillar 966C
 
Caterpillar 966C
- Wheel Loaders
PETERSON TRACTOR CO
Caterpillar 966C, Wheel Loaders, Construction
30,547 
Caterpillar 966C, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
31,209 
Caterpillar 966C, Wheel Loaders, Construction


Caterpillar 966C, Wheel Loaders, Construction
35,551 
Caterpillar 966C, Wheel Loaders, Construction

FINNING CANADA
Caterpillar 966C, Wielladers, Bouw
28.000 
Caterpillar 966C, Wielladers, Bouw
- Wheel loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.