IMPLEMENTS
LINKAGE GPHYDRAULIC SYSTEM
CYLINDER GPVALVE GP
CYLINDER GP
IMPLEMENTS
LINKAGE GP
#ZEBP14980550
7G-0085: LINKAGE GP-IMPLEMENT
7G0085 LINKAGE GP-IMPLEMENT-PART 2 OF 2
8A BULLDOZER
S/N 7JC1-UP
PART OF 2Y8478 CONTROL AR-HYDRAULIC
AN ATTACHMENT
8A BULLDOZER
S/N 7JC1-UP
PART OF 2Y8478 CONTROL AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-4219 | [1] | COVER-PROTECTIVE | |
| 2. | 3T-9350 | [1] | LEVER (DOZER CONTROL) | |
| 3. | 2A-1736 | [1] | HANDLE | |
| 4. | 6T-6952 | [1] | LEVER AS | |
| 5. | 5J-5315 | [1] | ROD END | |
| 6. | 1B-4203 | [1] | NUT-FULL | |
| 7. | 7D-9722 | [1] | SPRING | |
| 8. | 2Y-9974 C | [1] | ROD AS | |
| 2Y-9973 C | [1] | ROD | ||
| 5J-5315 C | [1] | ROD END | ||
| 1B-4203 C | [1] | NUT-FULL | ||
| 9. | 9K-6034 C | [1] | LUG | |
| 10. | 3T-9351 | [1] | SHAFT | |
| 11. | 9G-1240 | [1] | SEAL | |
| 12. | 6P-5207 | [1] | SEAL-DOMED | |
| 13. | 6P-5209 | [1] | COVER | |
| 14. | 6P-5208 | [1] | GUIDE-CONTROL | |
| 15. | 2J-7295 | [1] | SPRING | |
| 16. | 8T-2637 C | [1] | PIN-SPRING | |
| 17. | 4J-3044 C | [4] | BEARING-NEEDLE | |
| 18. | 7F-0192 | [1] | BOLT | |
| 1B-2578 | [1] | NUT | ||
| 2K-4973 | [1] | LOCKNUT | ||
| 19. | 6V-3294 | [4] | BOOT-ROD END | |
| 20. | 8T-0741 C | [4] | SEAL-LIP TYPE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#ZEBP14980551
3T-2594: LINKAGE GP-IMPLEMENT
3T2594 IMPLEMENT LINKAGE GROUP-ADJUSTABLE RIPPER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-1736 | [1] | HANDLE (RIPPER CONTROL) | |
| 2. | 3T-9359 C | [1] | LEVER | |
| 3. | 2J-7295 | [1] | SPRING | |
| 4. | 6P-5207 | [1] | SEAL-DOMED | |
| 5. | 2L-6267 | [2] | LOCKNUT | |
| 6. | 3P-3676 | [1] | CLAMP | |
| 4L-9337 | [1] | BOLT | ||
| 6V-8801 | [1] | NUT | ||
| 7. | 3T-9351 C | [1] | SHAFT | |
| 8T-2637 | [1] | PIN-SPRING | ||
| 8. | 8T-2502 | [2] | BOLT | |
| 9. | 3T-9345 C | [1] | BRACKET | |
| 10. | 3T-9358 C | [1] | SHAFT AS | |
| 11. | 5J-5315 | [2] | ROD END | |
| 12. | 6V-8183 | [2] | NUT-FULL | |
| 13. | 6P-7072 | [1] | ROD | |
| 14. | 9S-1303 | [2] | PIN | |
| 3B-4607 | [2] | COTTER | ||
| 15. | 8T-4896 | [2] | WASHER-HARD | |
| 16. | 1S-9593 C | [2] | STRAP-CABLE | |
| 17. | 6V-3294 C | [2] | BOOT-ROD END | |
| 18. | 9G-1240 | [1] | SEAL | |
| 19. | 3T-2592 | [1] | ROD | |
| 20. | 5P-9209 C | [4] | BEARING-ROLLER | |
| 5P-8168 CF | [1] | FILM-INSTRUCTION | ||
| (MOUNTED ON | ||||
| PLASTIC AIR DUCT) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
#ZEBP14980552
6P-8988: CYLINDER GP-VALVE-RH
6P8988 VALVE GP-CYLINDER R.H.-TYPE 1
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 3G8537-PAGE 251
PART OF 3G6088, 3G6090 BULLDOZERS AR
AN ATTACHMENT
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 3G8537-PAGE 251
PART OF 3G6088, 3G6090 BULLDOZERS AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-4204 Y | [1] | VALVE GP | |
| 2. | 3G-8537 Y | [1] | CYLINDER GP-LIFT | |
| 3. | 7T-4890 C | [1] | PLATE | |
| 4. | 0S-1619 | [4] | BOLT | |
| 5. | 5P-1075 C | [4] | WASHER-HARD | |
| 6. | 9P-8514 | [1] | TUBE AS | |
| 7. | 6V-0422 | [1] | PLUG | |
| 8. | 0T-0319 | [4] | BOLT | |
| 9. | 5P-8244 | [4] | WASHER | |
| 10. | 2Y-5479 | [2] | FLANGE | |
| 11. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#ZEBP14980553
6P-8988: CYLINDER GP-VALVE-RH
6P8988 VALVE GP-CYLINDER R.H.-TYPE 2
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 9T2860-PAGE 251.02
PART OF 3G6088, 3G6090 BULLDOZER AR
AN ATTACHMENT
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 9T2860-PAGE 251.02
PART OF 3G6088, 3G6090 BULLDOZER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-4204 Y | [1] | VALVE GP | |
| 2. | 9T-2860 CY | [1] | CYLINDER GP-LIFT | |
| 3. | 7T-4890 | [1] | PLATE | |
| 4. | 8T-7008 C | [4] | BOLT | |
| 5. | 5P-1075 | [4] | WASHER-HARD | |
| 6. | 9P-8514 | [1] | TUBE AS | |
| 7. | 6V-0422 | [1] | PLUG | |
| 8. | 7X-0310 C | [4] | BOLT | |
| 9. | 8T-5360 C | [4] | WASHER | |
| 10. | 2Y-5479 | [2] | FLANGE | |
| 11. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 12. | 3G-0910 C | [1] | CAP-BEARING | |
| 13. | 3G-0911 CB | [12] | SHIM (51MM THK) | |
| 14. | 9S-1322 C | [4] | BOLT | |
| 2J-3505 C | [4] | NUT-FULL | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#ZEBP14980554
6P-8989: CYLINDER GP-VALVE-LH
6P8989 VALVE GP-CYLINDER L.H.-TYPE 1
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 3G8537-PAGE 251
PART OF 3G6088, 3G6090 BULLDOZERS AR
AN ATTACHMENT
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 3G8537-PAGE 251
PART OF 3G6088, 3G6090 BULLDOZERS AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-4204 Y | [1] | VALVE GP | |
| 2. | 3G-8537 Y | [1] | CYLINDER GP-LIFT | |
| 3. | 7T-4890 C | [1] | PLATE | |
| 4. | 0S-1619 | [4] | BOLT | |
| 5. | 5P-1075 C | [4] | WASHER-HARD | |
| 6. | 7G-4844 | [1] | TUBE AS | |
| 7. | 6V-0422 | [1] | PLUG | |
| 8. | 0T-0319 | [4] | BOLT | |
| 9. | 5P-8244 | [4] | WASHER | |
| 10. | 2Y-5479 | [2] | FLANGE | |
| 11. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#ZEBP14980555
6P-8989: CYLINDER GP-VALVE-LH
6P8989 VALVE GP-CYLINDER L.H.-TYPE 2
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 9T2860-PAGE 251.02
PART OF 3G6088, 3G6090 BULLDOZER AR
AN ATTACHMENT
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
4T4204-PAGE 249, 9T2860-PAGE 251.02
PART OF 3G6088, 3G6090 BULLDOZER AR
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-4204 Y | [1] | VALVE GP | |
| 2. | 9T-2860 CY | [1] | CYLINDER GP-LIFT | |
| 3. | 7T-4890 | [1] | PLATE | |
| 4. | 8T-7008 C | [4] | BOLT | |
| 5. | 5P-1075 | [4] | WASHER-HARD | |
| 6. | 7G-4844 | [1] | TUBE AS | |
| 7. | 6V-0422 | [1] | PLUG | |
| 8. | 7X-0310 C | [4] | BOLT | |
| 9. | 8T-5360 C | [4] | WASHER | |
| 10. | 2Y-5479 | [2] | FLANGE | |
| 11. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 12. | 3G-0910 C | [1] | CAP-BEARING | |
| 13. | 3G-0911 CB | [12] | SHIM (51MM THK) | |
| 14. | 9S-1322 C | [4] | BOLT | |
| 2J-3505 C | [4] | NUT-FULL | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#ZEBP14980556
4T-4204: VALVE GP
4T4204 VALVE GROUP-QUICK DROP
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
PART OF 6P8988 & 6P8989 VALVE & CYLINDER
AN ATTACHMENT
8S BULLDOZER S/N 26B100-UP, 8A BULLDOZER S/N 27B100-UP
PART OF 6P8988 & 6P8989 VALVE & CYLINDER
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1587 C | [2] | BOLT | |
| 5P-1076 C | [2] | WASHER-HARD | ||
| 2. | 6V-1849 | [1] | COVER | |
| 3. | 8T-7265 C | [1] | SEAL-FACE | |
| 4. | 4T-4202 | [1] | VALVE GP | |
| 4T-4207 | [1] | PLUG-ORIFICE | ||
| 5. | 7M-1297 | [1] | SPRING | |
| 6. | 9T-4733 C | [1] | MANIFOLD | |
| 7. | 8M-2530 | [2] | BOLT-12 POINT HEAD | |
| 8. | 8T-7243 C | [1] | SEAL-FACE | |
| 9. | 1D-4566 | [5] | BOLT | |
| 10. | 8T-7212 C | [3] | SEAL | |
| 11. | 8T-7268 C | [1] | SEAL-FACE | |
| 12. | 0S-1569 | [1] | BOLT | |
| 13. | 1D-4593 | [1] | BOLT | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#ZEBP14980557
3G-6457: CYLINDER GP-RIPPER
3G6457 CYLINDER GP-RIPPER-4 REQUIRED
210 MM (8.3 IN.) BORE X 457 MM (18 IN.) STROKE. TYPE 1
RIPPER S/N 2HC1-UP & 9LB1-UP
PART OF 4T9465, 4T9466 RIPPERS-SHANK
AN ATTACHMENT
210 MM (8.3 IN.) BORE X 457 MM (18 IN.) STROKE. TYPE 1
RIPPER S/N 2HC1-UP & 9LB1-UP
PART OF 4T9465, 4T9466 RIPPERS-SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE | |
| 2. | 7J-1965 | [2] | WASHER | |
| 3. | 5J-5559 | [1] | SEAL AS | |
| 4. | 1J-2176 C | [1] | SEAL-O-RING | |
| 5. | 2J-0744 | [1] | RING-BACK-UP | |
| 6. | 1D-4631 | [2] | BOLT | |
| 7. | 5P-8249 | [8] | WASHER | |
| 8. | 3G-6827 | [1] | ROD AS-PISTON | |
| 9. | 3G-5999 | [1] | BEARING-SLEEVE | |
| 10. | 6J-4169 | [1] | SEAL-LIP TYPE | |
| 11. | 5J-8325 R | [1] | SEAL-U-CUP | |
| 12. | 6J-7167 | [1] | SEAL-O-RING | |
| 13. | 1D-4627 | [6] | BOLT | |
| 14. | 6J-8319 | [1] | HEAD | |
| 15. | 3G-6828 | [1] | CYLINDER AS-HYD | |
| 16. | 3G-5999 | [1] | BEARING-SLEEVE | |
| 17. | 1U-1808 | [1] | PISTON | |
| 18. | 4J-7376 R | [1] | RING-WEAR | |
| 19. | 5J-3488 | [1] | NUT-SELF LOCKING | |
| 20. | 3J-7283 | [1] | FITTING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#ZEBP14980558
3G-6457: CYLINDER GP-RIPPER
3G6457 CYLINDER GP-RIPPER-4 REQUIRED
210 MM (8.3 IN.) BORE X 457 MM (18 IN.) STROKE. TYPE 2
RIPPER S/N 2HC1-UP & 9LB1-UP
PART OF 4T9465, 4T9466, 7T6940, 7T6939 RIPPER ARS-SHANK
AN ATTACHMENT
210 MM (8.3 IN.) BORE X 457 MM (18 IN.) STROKE. TYPE 2
RIPPER S/N 2HC1-UP & 9LB1-UP
PART OF 4T9465, 4T9466, 7T6940, 7T6939 RIPPER ARS-SHANK
AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE | |
| 2. | 7J-1965 | [2] | WASHER | |
| 3. | 5J-5559 | [1] | SEAL AS | |
| 4. | 1J-2176 | [1] | SEAL-O-RING | |
| 5. | 2J-0744 | [1] | RING-BACK-UP | |
| 6. | 1D-4630 C | [2] | BOLT | |
| 7. | 5P-8249 | [8] | WASHER | |
| 8. | 3G-6827 R | [1] | ROD AS-PISTON | |
| 9. | 3G-5999 | [1] | BEARING-SLEEVE | |
| 10. | 8T-8389 | [1] | SEAL | |
| 11. | 5J-8325 | [1] | SEAL-U-CUP | |
| 12. | 8C-9121 | [1] | SEAL AS | |
| 13. | 1D-4627 | [6] | BOLT | |
| 14. | 9T-3505 C | [1] | HEAD | |
| 15. | 3G-6828 R | [1] | CYLINDER AS-HYD | |
| 16. | 3G-5999 | [1] | BEARING-SLEEVE | |
| 17. | 1U-1808 | [1] | PISTON | |
| 18. | 4J-7376 | [1] | RING-WEAR | |
| 19. | 5J-3488 | [1] | NUT-SELF LOCKING | |
| 20. | 8T-6745 C | [1] | RING-WEAR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| R | REMFG PART MAY BE AVAILABLE | |||
#ZEBP14980559
3G-8537: CYLINDER GP-LIFT
3G8537 CYLINDER GP-LIFT
133 MM(5 IN.)BORE X 1535 MM(60 IN.)STROKE. TYPE 1
8S BULLDOZER S/N 26B100-UP
PART OF 6P8988 & 6P8989 VALVE & CYLINDER. AN ATTACHMENT
133 MM(5 IN.)BORE X 1535 MM(60 IN.)STROKE. TYPE 1
8S BULLDOZER S/N 26B100-UP
PART OF 6P8988 & 6P8989 VALVE & CYLINDER. AN ATTACHMENT
For full view, you need register
Parts for your D8L TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8193 | [1] | PISTON AS | |
| 2. | 5J-2529 | [4] | INSERT | |
| 3. | 5J-2528 | [2] | PLUNGER | |
| 4. | 3G-8191 | [1] | WASHER | |
| 5. | 3G-8194 R | [1] | CYLINDER AS | |
| 6. | 5J-1192 | [2] | BEARING-SLEEVE | |
| 7. | 9S-1322 | [4] | BOLT | |
| 2J-3505 | [4] | NUT-FULL | ||
| 8. | 1D-4610 | [4] | BOLT | |
| 5P-8248 | [4] | WASHER-HARD | ||
| 9. | 3G-8186 | [1] | HEAD | |
| 10. | 5J-5731 | [1] | NUT-SELF LOCKING | |
| 11. | 9J-7978 | [1] | RING-WEAR | |
| 12. | 2J-1411 | [1] | SEAL-LIP TYPE | |
| 13. | 5J-7234 | [1] | SEAL AS | |
| 14. | 2J-7767 | [1] | RING-BACK-UP | |
| 15. | 5F-3106 | [1] | SEAL-O-RING | |
| 16. | 4T-0406 R | [1] | ROD AS | |
| 17. | 5J-8300 | [1] | SEAL-U-CUP | |
| 18. | 6J-6915 | [1] | SEAL-RING | |
| 19. | 3G-0910 | [1] | CAP-BEARING | |
| 20. | 3G-0911 | [12] | SHIM | |
| R | REMFG PART MAY BE AVAILABLE | |||
Information:
Caterpillar Parts SIS Catalog D8L :
Truck sale:
250,617 USD
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
