AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2P8598 HUB GP-CRANKSHAFT ENGINE S/N 46V9441-99999, 9CB1-UP D4E TRACK-TYPE TRACTOR


BASIC ENGINE
CRANKSHAFT GP
BALANCER GP
PISTON & ROD GP
BALANCER GP
PISTON & ROD GP
CAMSHAFT GP
CYLINDER HEAD GP

TRACK-TYPE TRACTOR D4E TRACK-TYPE TRACTOR 2CB
 D4E TRACTOR-SPECIAL APPLICATION / DIRECT DRIVE / 2CB00001-UP (MACHINE) POWERED BY 3304 ENGINE ZEBP1499 D4E 2CB   (1985)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT AS
2Y-4515 CRANKSHAFT AS
CRANKSHAFT GP
2Y-5204 CRANKSHAFT GP
CRANKSHAFT GP
2Y-5204 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
2P-6226 SEAL GP-CRANKSHAFT
HUB GP-CRANKSHAFT
2P-8598 HUB GP-CRANKSHAFT
PULLEY GP-CRANKSHAFT
7N-2887 PULLEY GP-CRANKSHAFT
 

#ZEBP14990020
 

2P-8598: HUB GP-CRANKSHAFT

2P8598 HUB GP-CRANKSHAFT
ENGINE S/N 46V9441-99999, 9CB1-UP
c512201 ZEBP1499
2P8598 HUB GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-5687 [1] HUB-CRANKSHAFT  
2. 5S-9948 [1] WASHER-PULLEY  
3. 7B-5163 [1] BOLT  
 

#ZEBP14990021
 

5S-6425: BALANCER GP

5S6425 BALANCER GP
ENGINE S/N 46V9441-99999
c342450 ZEBP1499
5S6425 BALANCER GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-2894 C [4] WASHER  
2. 4S-6417 [2] PLATE-THRUST  
3. 4N-7977 C [1] SHAFT AS-BALANCE (RH)  
  4N-7978 [1] SHAFT AS-BALANCE (LH)  
    (20 TEETH)
    (EA SHAFT AS INCL)
  4N-7976 C [1] SHAFT-BALANCE  
  4H-9699 C [1] KEY-WOODRUFF  
4. 0S-1594 [4] BOLT  
  1N-8354 [2] LOCK  
    -OR-
  030-8535 C [4] BOLT-SELF LOCKING  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14990022
 

9S-8912: PISTON & ROD GP

9S8912 ROD & PISTON GP-4 REQUIRED
ENGINE S/N 46V9441-99999
c222701 ZEBP1499
9S8912 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9804 C [1] PIN  
2. 9H-4015 [2] RETAINER  
3. 6N-8061 C [1] ROD ASSEM.  
  7S-9347 [1] BEARING  
4. 1P-9956 [2] BOLT  
  5S-6348 [2] NUT  
5. 7M-7821 [1] BEARING (Standard)  
  2S-0502 [1] BEARING (.010" Undersize)  
  2S-0503 [1] BEARING (.020" Undersize)  
  7M-7826 [1] BEARING (.030" Undersize)  
6. 8N-3183 C [1] PISTON GROUP  
7. 9S-7788 [1] RING (Oil)  
8. 5S-6750 [1] RING (Intermediate)  
9. 7S-8378 [1] RING (Top)  
  7S-9404 [1] RING GROUP  
    (Consists of Complete Set of Rings For One Piston)
  C   INDICATES CHANGE
 

#ZEBP14990023
 

1W-2872: BALANCER GP

1W2872 BALANCER GP
ENGINE S/N 9CB1-UP
c303465 ZEBP1499
1W2872 BALANCER GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2871 [1] SHAFT AS-BALANCE (RH-20 TEETH)  
  1W-2870 [1] SHAFT AS-BALANCE (LH-20 TEETH)  
    (EACH INCLUDES)
2. 4H-9699 [1] KEY-WOODRUFF  
3. 0S-1594 [4] BOLT (2.54CM LG)  
  1N-8354 [2] LOCK  
    -OR-
  030-8535 C [4] BOLT-SELF LOCKING (2.22CM LG)  
  5M-2894 C [4] WASHER  
4. 4S-6417 [2] PLATE-THRUST  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14990024
 

1W-6588: PISTON & ROD GP

1W6588 ROD & PISTON GP-4 REQUIRED
ENGINE S/N 9CB1-UP
c312149 ZEBP1499
1W6588 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 8N-1721 R [1] ROD AS-CONNECTING  
  8N-1849 [1] BEARING-CONNECTING ROD  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 8N-8220 C [1] BEARING-CONNECTING ROD (STANDARD)  
  8N-8221 AC [1] BEARING-CONNECTING ROD (.25MM)UNDERSIZE  
  8N-8222 AC [1] BEARING-CONNECTING ROD (.51MM)UNDERSIZE  
  8N-8223 AC [1] BEARING-CONNECTING ROD (.76MM)UNDERSIZE  
6. 1W-6757 R [1] BODY AS-PISTON  
7. 9L-6934 [1] RING-PISTON (OIL)  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 9S-3029 [1] RING-PISTON TOP  
10. 2W-6091 AC [1] RING GP-PISTON  
11. 9S-3029 [1] RING-PISTON TOP  
12. 5S-6750 [1] RING-INTERMEDIATE  
13. 9L-6934 [1] RING-PISTON (OIL)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP14990025
 

1N-4436: CAMSHAFT GP

1N4436 CAMSHAFT GP-SINGLE
ENGINE S/N 9CB1-UP
c479356 ZEBP1499
1N4436 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-1491 [1] LOCK  
2. 7S-2204 [1] WASHER-THRUST  
3. 0S-0509 [2] BOLT  
4. 7C-3862 [1] CAMSHAFT  
 

#ZEBP14990026
 

2P-6201: CAMSHAFT GP

2P6201 CAMSHAFT GP
ENGINE S/N 46V9441-99999
c227965 ZEBP1499
2P6201 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-4111 C [1] CAMSHAFT  
2. 7S-2204 [1] WASHER-THRUST  
3. 8S-1491 [1] LOCK  
4. 0S-0509 [2] BOLT  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP14990027
 

2Y-7588: CYLINDER HEAD GP

2Y7588 CYLINDER HEAD GP
ENGINE S/N 46V9441-9546
c707187 ZEBP1499
2Y7588 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7386 [1] GASKET  
2. [4] VALVE-INLET  
3. 8N-0875 [4] VALVE-EXHAUST  
4. 7S-7144 [8] SPRING-VALVE  
5. 2A-4429 [16] LOCK-RETAINER  
6. 1W-5300 [8] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
7. 5S-6795 [4] CHAMBER AS  
  7S-3206 [4] SEAL-O-RING  
  5M-2667 [4] GASKET-CHAMBER (4.93MM(.194IN)THK)  
  2S-8959 [4] GASKET-CHAMBER (5.66MM(.223IN)THK)  
  2S-8960 [4] GASKET-CHAMBER (6.3MM(.248IN)THK)  
8. 8N-1188 RY [1] CYLINDER HEAD GP  
  2W-1084 F [1] COVER AS-CYLINDER HEAD  
  8S-1606 F [1] GASKET-COVER  
  F   NOT SHOWN
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP14990028
 

2Y-9514: CYLINDER HEAD GP

2Y9514 CYLINDER HEAD GP
ENGINE S/N 46V9547-99999
c403685 ZEBP1499
2Y9514 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-5300 [8] ROTOCOIL AS  
    (EACH INCLUDES)
  6N-7174 [1] SHIELD-OIL  
3. 7S-7144 [8] SPRING-VALVE  
4. [4] VALVE-INLET  
5. 5S-6795 [4] CHAMBER AS  
6. 7S-3206 [4] SEAL-O-RING  
7. 5M-2667 [4] GASKET-CHAMBER  
8. 8N-0875 [4] VALVE-EXHAUST  
9. 6N-8121 R [1] CYLINDER HEAD AS  
  2H-3855 [1] BOLT  
10. 7N-2597 [1] SPACER  
11. 2P-1262 [8] GUIDE-VALVE  
12. 2B-0858 [3] PLUG-PIPE  
13. 2S-8959 [4] GASKET-CHAMBER 5.67MM(.223IN)THK  
  2S-8960 [4] GASKET-CHAMBER 6.30MM(.248IN)THK  
14. 4W-8087 [12] SEAL-WATER (LARGE)  
15. 7N-8018 [4] SEAL-WATER (SMALL)  
16. 7N-8022 [1] GASKET-CYLINDER HEAD  
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP14990029
 

7N-8874: CYLINDER HEAD GP

7N8874 CYLINDER HEAD GP*R
ENGINE S/N 9CB1-UP
SERVICE REPLACEMENT ORDER 1N4304-PAGE 14.02.01
c524459 ZEBP1499
7N8874 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your D4E TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 7N-8018 [4] SEAL-WATER  
3. 7S-7144 [8] SPRING-VALVE  
4. 6N-9915 [4] VALVE-INLET  
5. 6N-9916 [4] VALVE-EXHAUST  
6. 4P-8915 C [1] GASKET-CYLINDER HEAD  
7. 3S-5496 [1] SEAL-O-RING  
8. 9Y-1798 C [12] SEAL-WATER  
9. 1N-4304 R [1] CYLINDER HEAD GP  
10. 2P-1262 [8] GUIDE-VALVE  
11. 3S-8313 C [4] PLUG-CUP  
12. 5M-6213 [1] PLUG  
13. 0S-1594 [4] BOLT  
14. 5M-2894 [4] WASHER  
15. 1P-6367 [1] COVER  
16. 5S-6735 [1] GASKET  
17. 2B-0858 [3] PLUG-PIPE  
18. 3B-0623 [4] PLUG-CUP  
19. 8N-4485 C [1] VALVE AS  
20. 2W-4837 C [4] INSERT (EXHAUST)  
21. 7N-4448 [4] INSERT (INTAKE)  
22. 3P-1896 [8] PLUG-CUP  
23. 1W-5300 C [8] ROTOCOIL AS  
    (EACH INCLUDES)
  8N-7782 [1] ROTOCOIL AS  
24. 6N-7174 C [1] SHIELD-OIL  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
 

Information:

Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3304 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
3304 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE
Crankshaft Hub
3304 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper And Pulley
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Crankshaft Front Seal And Wear Sleeve
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Crankshaft Main Bearings
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Crankshaft Rear Seal And Wear Sleeve
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Crankshaft
3304 VEHICULAR ENGINE FOR D4E TRACTORS
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Seal For Crankshaft{1161}
1977/07/04
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2004/09/27
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16

Caterpillar Parts SIS Catalog D4E :

SEAL GP-CRANKSHAFT
2P-6226 SEAL GP-CRANKSHAFT
CRANKSHAFT GP
2Y-5204 CRANKSHAFT GP
CRANKSHAFT GP
2Y-5204 CRANKSHAFT GP
CRANKSHAFT AS
2Y-4515 CRANKSHAFT AS
COVER GP-CYLINDER BLOCK
2W-0102 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
2Y-1646 COVER GP-CYLINDER BLOCK
CRANKSHAFT BEARING REPLACEMENTS
CYLINDER BLOCK GP
1N-3574 CYLINDER BLOCK GP
BALANCER GP
5S-6425 BALANCER GP
PISTON & ROD GP
9S-8912 PISTON & ROD GP
BALANCER GP
1W-2872 BALANCER GP
PISTON & ROD GP
1W-6588 PISTON & ROD GP
CAMSHAFT GP
1N-4436 CAMSHAFT GP
CAMSHAFT GP
2P-6201 CAMSHAFT GP
CYLINDER HEAD GP
2Y-7588 CYLINDER HEAD GP
CYLINDER HEAD GP
2Y-9514 CYLINDER HEAD GP

Truck sale:

Caterpillar D4E, Construction
21,500 
Caterpillar D4E, Construction
- Dozers
BLANCHARD MACHINERY CO.
1986 CAT D4E
Call 
1986 CAT D4E

National Equipment, LLC
Madera, California
1981 CAT D4E
USD $10,984 
1981 CAT D4E

Conquest Equipment
Oxbow, Saskatchewan, Canada
1980 CAT D4E
USD $10,984 
1980 CAT D4E

Conquest Equipment
Oxbow, Saskatchewan, Canada
CAT D4E
USD $15,000 
CAT D4E

L & L Equipment Sales
La Vergne, Tennessee
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.