1W6588 ROD & PISTON GP REFER TO ENGINE AR FOR QUANTITY REQUIRED 930R WHEEL LOADER

Pos.	Part No	Qty	Parts name
1.	7N-9805	[1]	PIN-PISTON
2.	1S-9543	[2]	RETAINER-PIN
3.	8N-1721 R	[1]	ROD AS-CONNECTING
	8N-1849	[1]	BEARING-CONNECTING ROD
4.	1P-9956	[2]	BOLT-CONNECTING ROD
	5S-6348	[2]	NUT-SPECIAL
5.	8N-8220 C	[1]	BEARING-CONNECTING ROD (STANDARD)
	8N-8221 AC	[1]	BEARING-CONNECTING ROD (.25MM)UNDERSIZE
	8N-8222 AC	[1]	BEARING-CONNECTING ROD (.51MM)UNDERSIZE
	8N-8223 AC	[1]	BEARING-CONNECTING ROD (.76MM)UNDERSIZE
6.	1W-6757 R	[1]	BODY AS-PISTON
7.	9L-6934	[1]	RING-PISTON (OIL)
8.	5S-6750	[1]	RING-INTERMEDIATE
9.	9S-3029	[1]	RING-PISTON TOP
10.	2W-6091 AC	[1]	RING GP-PISTON
11.	9S-3029	[1]	RING-PISTON TOP
12.	5S-6750	[1]	RING-INTERMEDIATE
13.	9L-6934	[1]	RING-PISTON (OIL)
	A		NOT PART OF THIS GROUP
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#ZEBP16530021

1N-4436: CAMSHAFT GP-SINGLE

CAMSHAFT GP-SINGLE

1N4436 CAMSHAFT GP-SINGLE

c479356 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8S-1491	[1]	LOCK
2.	7S-2204	[1]	WASHER-THRUST
3.	0S-0509	[2]	BOLT
4.	7C-3862	[1]	CAMSHAFT

#ZEBP16530022

8N-0224: CYLINDER HEAD GP

CYLINDER HEAD GP

8N0224 CYLINDER HEAD GP

c489159 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[16]	LOCK-RETAINER
2.	1W-5300	[8]	ROTOCOIL AS
			(EACH INCLUDES)
	8N-7782	[1]	ROTOCOIL AS
3.	6N-7174 C	[1]	SHIELD-OIL
4.	6N-9915	[4]	VALVE-INLET
5.	7N-0573	[4]	VALVE-EXHAUST
6.	7N-8022	[1]	GASKET-CYLINDER HEAD
7.	3S-5496	[1]	SEAL-O-RING
8.	4W-8087	[12]	SEAL-WATER
9.	7N-8018	[4]	SEAL-WATER
10.	1N-4304 R	[1]	CYLINDER HEAD GP
11.	2P-1262	[8]	GUIDE-VALVE
12.	3S-8313	[4]	PLUG-CUP
13.	5M-6213	[1]	PLUG
14.	0S-1594	[4]	BOLT
15.	5M-2894	[4]	WASHER
16.	1P-6367	[1]	COVER
17.	5S-6735	[1]	GASKET
18.	2B-0858	[3]	PLUG-PIPE
19.	3B-0623	[4]	PLUG-CUP
20.	1S-3062	[12]	DIRECTOR-WATER
21.	8N-0435	[4]	INSERT (EXHAUST)
22.	7N-4448	[4]	INSERT (INTAKE)
23.	3P-1896	[8]	PLUG-CUP
24.	7S-7144	[8]	SPRING-VALVE
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#ZEBP16530023

7N-8874: CYLINDER HEAD GP

CYLINDER HEAD GP

7N8874 CYLINDER HEAD GP *R
S/N 9CB443-UP
AN ATTACHMENT

c524459 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[16]	LOCK-RETAINER
2.	7N-8018	[4]	SEAL-WATER
3.	7S-7144	[8]	SPRING-VALVE
4.	6N-9915	[4]	VALVE-INLET
5.	6N-9916	[4]	VALVE-EXHAUST
6.	4P-8915 C	[1]	GASKET-CYLINDER HEAD
7.	3S-5496	[1]	SEAL-O-RING
8.	9Y-1798 C	[12]	SEAL-WATER
9.	1N-4304 R	[1]	CYLINDER HEAD GP
10.	2P-1262	[8]	GUIDE-VALVE
11.	3S-8313 C	[4]	PLUG-CUP
12.	5M-6213	[1]	PLUG
13.	0S-1594	[4]	BOLT
14.	5M-2894	[4]	WASHER
15.	1P-6367	[1]	COVER
16.	5S-6735	[1]	GASKET
17.	2B-0858	[3]	PLUG-PIPE
18.	3B-0623	[4]	PLUG-CUP
19.	8N-4485 C	[1]	VALVE AS
20.	2W-4837 C	[4]	INSERT (EXHAUST)
21.	7N-4448	[4]	INSERT (INTAKE)
22.	3P-1896	[8]	PLUG-CUP
23.	1W-5300 C	[8]	ROTOCOIL AS
			(EACH INCLUDES)
	8N-7782	[1]	ROTOCOIL AS
24.	6N-7174 C	[1]	SHIELD-OIL
	C		CHANGE FROM PREVIOUS TYPE
	R		REMFG PART MAY BE AVAILABLE

#ZEBP16530024

2P-6530: COVER GP-CYLINDER HEAD

COVER GP-CYLINDER HEAD

2P6530 COVER GP-CYLINDER HEAD

c348448 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-6367	[1]	COVER
	5S-6735	[1]	GASKET
2.	2P-3201	[4]	BOLT-WASHER HEAD
			-OR-
	0S-1594 B	[4]	BOLT (25.4MM LG)
	5M-2894 B	[4]	WASHER
	B		USE AS REQUIRED

#ZEBP16530025

7N-8024: VALVE MECHANISM GP

VALVE MECHANISM GP

7N8024 VALVE MECHANISM GP

c480067 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9H-1113	[2]	RING-RETAINER
2.	9H-1110	[8]	WASHER
3.	9H-1112	[2]	SPRING
4.	9M-9886 B	[2]	WASHER
5.	8M-4448 C	[1]	SEAL-O-RING
6.	8S-1498	[1]	BRACKET-SHAFT
7.	1L-5072	[1]	DOWEL
8.	8N-3325 C	[4]	ROCKER ARM GP-VALVE EXHAUST
			(EACH INCLUDES)
9.	5S-5917	[1]	SCREW-ROCKER ADJUSTING
10.	3S-2713	[1]	NUT-FULL
11.	2S-0736	[1]	WASHER-HARD
12.	1B-7709	[1]	BOLT
13.	8N-3327 C	[4]	ROCKER ARM GP-VALVE INTAKE
			(EACH INCLUDES)
14.	5S-5917	[1]	SCREW-ROCKER ADJUSTING
15.	3S-2713	[1]	NUT-FULL
16.	4B-4910	[3]	SPRING
17.	5S-5879	[2]	BRACKET-SHAFT
18.	8N-3312	[1]	SHAFT-ROCKER ARM
19.	6V-3508	[1]	PLUG-CUP
20.	5M-4606	[1]	DOWEL
21.	7N-8015	[1]	BRACKET-ROCKER ARM SHAFT
22.	5S-5918	[8]	ROD-VALVE PUSH
23.	7S-3161	[8]	LIFTER-VALVE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#ZEBP16530026

7N-9534: FASTENER GP-CYLINDER HEAD

FASTENER GP-CYLINDER HEAD

7N9534 FASTENER GP-CYLINDER HEAD

c227966 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5B-9603	[5]	BOLT (3/8-16X5IN)
2.	1B-7709 C	[3]	BOLT (5/8-11X8IN)
3.	2S-0736 C	[17]	WASHER-HARD
4.	1D-4595	[14]	BOLT (5/8-11X6IN)
	C		CHANGE FROM PREVIOUS TYPE

#ZEBP16530027

8N-0303: HOUSING GP-FRONT

HOUSING GP-FRONT

8N0303 HOUSING GP-FRONT

c519017 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0923	[1]	HOUSING AS-FRONT
2.	9X-2485	[6]	STUD
3.	1W-7816 C	[1]	PLATE AS-FRONT
	1W-7110	[1]	PLATE-FRONT
	5M-6214	[1]	PLUG-PIPE
4.	6H-0192	[3]	STUD
5.	8N-0110	[1]	GASKET-FRONT PLATE
6.	1W-3900 C	[1]	GASKET
	C		CHANGE FROM PREVIOUS TYPE

#ZEBP16530028

8N-4446: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

8N4446 COVER GP-VALVE MECHANISM

c476725 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0264	[1]	COVER AS-CYLINDER HEAD
2.	8S-1606	[1]	GASKET-COVER
3.	0S-1617	[11]	BOLT
	9M-1974	[11]	WASHER

#ZEBP16530029

2P-6529: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

2P6529 COVER GP-FRONT HOUSING

c500031 ZEBP1653

For full view, you need register

Parts for your 930R WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9N-5769	[1]	COVER-HOUSING
2.	6N-7887	[1]	GASKET-HOUSING COVER
3.	3S-2713	[6]	NUT-FULL
4.	5M-2894	[6]	WASHER
5.	0S-1589	[2]	BOLT
6.	5F-3106	[1]	SEAL-O-RING
7.	6N-0462	[1]	COVER

Information:

BASIC ENGINE

PISTON & ROD GP

Special Instruction

Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}

Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}

Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Service Letter-NACD

The Engine Connecting Rod Bearing Cap Bolts Need To Be Replaced On Certain 120G, 12G, And 140G Motor Graders, 930T and 966C Loaders, And D5E, D6D and D6E Tractors
The Engine Connecting Rod Bearing Cap Bolts Need To Be Replaced On Certain 120G, 12G, And 140G Motor Graders, 930T and 966C Loaders, And D5E, D6D and D6E Tractors

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Technical Information Bulletin

Connecting Rod Bearings
Connecting Rod Bearings

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Specifications

Pistons And Rings
3304 VEHICULAR ENGINE

Connecting Rod
3304 VEHICULAR ENGINE

Bearing Surface (Journal) For Connecting Rods
3304 VEHICULAR ENGINE

Main Bearings And Connecting Rod Bearings
3304 VEHICULAR ENGINE

Tool Operating Manual

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Service Letter-APD

Disassembly and Assembly

Connecting Rod Bearings
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS

Pistons
3304 VEHICULAR ENGINE FOR 920 & 930 WHEEL LOADERS

Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Remove
3304B and 3306B Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Install
3304B and 3306B Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Assemble
3304B and 3306B Engines for Caterpillar Built Machines

Connecting Rod Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines

Connecting Rod Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Service Magazine

6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09

Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11

Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09

Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08

Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22

Reuse Of Engine Bearings{1230}
1983/05/16

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29

Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07

Two Different Piston Oil Ring Designs Used{1215}
1985/11/11

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20

Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01

Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06

Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17

Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24

Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21

5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Pin Bore Is Now Offset (Not In The Center) .059" (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10

New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31

Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 930R :

1W-2872 BALANCER GP

2P-8598 HUB GP-CRANKSHAFT

2P-6224 SEAL GP-CRANKSHAFT

2Y-4515 CRANKSHAFT AS

CRANKSHAFT BEARING REPLACEMENTS

2Y-5204 CRANKSHAFT GP

2W-0102 COVER GP-CYLINDER BLOCK

2Y-5204 CRANKSHAFT GP

1N-4436 CAMSHAFT GP-SINGLE

8N-0224 CYLINDER HEAD GP

7N-8874 CYLINDER HEAD GP

2P-6530 COVER GP-CYLINDER HEAD

7N-8024 VALVE MECHANISM GP

7N-9534 FASTENER GP-CYLINDER HEAD

8N-0303 HOUSING GP-FRONT

8N-4446 COVER GP-VALVE MECHANISM

Truck sale:

USD $26,894

1987 CAT 930R

Birmaq
São José Dos Pinhais, PARANA, Brazil

CAT 930R

First Capitol Auction Co
Vallejo, California 94590