AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1N3576 CYLINDER BLOCK GP PROVIDES FIELD REPLACEMENT FOR 7N6550 3306 GEN SET ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CRANKSHAFT GP
CYLINDER BLOCK GP
CRANKSHAFT GP
CAMSHAFT GP
PISTON & ROD GP
CYLINDER HEAD GP

GEN SET ENGINE 3306 GEN SET ENGINE 2ZC
 GENERATOR SET ENGINE 2ZC00001-UP ZEBP1720 3306 2ZC   (1986)

BASIC ENGINE

CYLINDER BLOCK GP
CYLINDER BLOCK GP
8N-3021 CYLINDER BLOCK GP
CYLINDER BLOCK AS
2Y-5235 CYLINDER BLOCK AS
CYLINDER BLOCK GP
2Y-9363 CYLINDER BLOCK GP
CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
CYLINDER BLOCK GP
1N-3576 CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
2Y-5174 COVER GP-CYLINDER BLOCK
 

#ZEBP17200010
 

1N-3576: CYLINDER BLOCK GP

1N3576 CYLINDER BLOCK GP
PROVIDES FIELD REPLACEMENT FOR 7N6550
c484537 ZEBP1720
1N3576 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-4046 [4] BEARING-SLEEVE  
2. 3J-6019 [1] PLUG  
3. 8K-1207 [2] PIN-DOWEL  
4. 4B-5387 [1] PLUG-CUP  
5. 1S-9540 [1] DOWEL  
6. 5B-7652 [2] DOWEL  
7. 6N-8003 [7] CAP-CRANKSHAFT BEARING  
8. 4B-3938 [1] PLUG-CUP  
9. 8B-6349 [2] DOWEL  
10. 5S-8462 [1] STUD  
11. 8N-4110 [1] BEARING-SLEEVE  
12. 4B-9782 [1] BALL  
13. 7S-3224 [14] BOLT  
  2S-5658 [14] WASHER-HARD  
 

#ZEBP17200011
 

2Y-5206: CRANKSHAFT GP

2Y5206 CRANKSHAFT GP
c407889 ZEBP1720
2Y5206 CRANKSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9342 [2] PLATE-THRUST  
2. 4W-5738 C [7] BEARING-MAIN  
3. 2Y-4507 C [1] CRANKSHAFT AS  
4. 9F-2247 [6] PLUG  
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP17200012
 

2Y-5174: COVER GP-CYLINDER BLOCK

2Y5174 COVER GP-CYLINDER BLOCK
c233836 ZEBP1720
2Y5174 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5249 [1] ADAPTER  
  4M-6480 [1] GASKET  
2. 1A-2029 [2] BOLT  
3. 5M-2894 [4] WASHER  
4. 8L-8662 [1] COVER  
  5S-8055 [1] GASKET  
5. 4B-3938 [1] PLUG  
6. 2A-3798 [2] DOWEL  
7. 8M-3267 [1] SCREW  
8. 0L-1351 [2] BOLT  
 

#ZEBP17200013
 

2P-6224: SEAL GP-CRANKSHAFT

2P6224 SEAL GP-CRANKSHAFT
c490391 ZEBP1720
2P6224 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0452 [1] SEAL GP-CRANKSHAFT (COUNTERCLOCKWISE ROTATION)(REAR)  
2. 362-8853 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) (FRONT)  
   
    -OR-
   
  9Y-9895 [1] SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION) (FRONT)  
 

#ZEBP17200014
 

CRANKSHAFT BEARING REPLACEMENTS

CRANKSHAFT BEARING REPLACEMENTS
ZEBP17200014 ZEBP1720
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    CYLINDER BLOCK NOT REBORED
    CRANKSHAFT GROUND FOR UNDERSIZE
    BEARING I.D.
   
  8N-8225 [7] .25 MM  
  8N-8226 [7] .51 MM  
  8N-8227 [7] .76 MM  
   
    CYLINDER BLOCK REBORED (51 MM)
    BEARING OVERSIZE O.D.
   
    CRANKSHAFT GROUND FOR UNDERSIZE
    BEARING I.D.
   
  8N-8228 [7] 0-STANDARD  
  8N-8229 [7] .25 MM  
 

#ZEBP17200015
 

1N-4406: CAMSHAFT GP

1N4406 CAMSHAFT GP
SINGLE
c556765 ZEBP1720
1N4406 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-2942 R [1] CAMSHAFT AS  
2. 7S-2204 [1] WASHER-THRUST  
3. 8S-1491 [1] LOCK  
4. 0S-0509 [2] BOLT  
  R   REMFG PART MAY BE AVAILABLE
 

#ZEBP17200016
 

2P-6272: PISTON & ROD GP

2P6272 ROD & PISTON GP-4 REQUIRED
c577494 ZEBP1720
2P6272 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9805 [1] PIN-PISTON  
2. 1S-9543 [2] RETAINER-PIN  
3. 5S-2793 [1] ROD AS  
  8N-0703 [1] BEARING  
4. 1P-9956 [2] BOLT-CONNECTING ROD  
  5S-6348 [2] NUT-SPECIAL  
5. 4W-5739 [1] BEARING-CONNECTING ROD (STANDARD)  
  8N-8221 A [1] BEARING-CONNECTING ROD (.254MM .01IN)US  
  8N-8222 A [1] BEARING-CONNECTING ROD (.508MM .02IN)US  
  8N-8223 A [1] BEARING-CONNECTING ROD (.762MM .03IN)US  
6. 9N-5251 [1] PISTON GP  
7. 9S-7788 [1] RING-PISTON (OIL)  
8. 5S-6750 [1] RING-INTERMEDIATE  
9. 9S-3029 [1] RING-PISTON TOP  
  9S-3068 C [1] RING GP (CONSISTS OF  
    COMPLETE SET OF RINGS
    FOR ONE PISTON)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP17200017
 

2Y-6548: CYLINDER HEAD GP

2Y6548 CYLINDER HEAD GP
c332534 ZEBP1720
2Y6548 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 [12] ROTOCOIL AS  
3. 2A-4429 [24] LOCK-RETAINER  
4. 6N-8120 [1] CYLINDER HEAD AS  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 3B-0623 [6] PLUG-CUP  
10. 3S-8313 [7] PLUG-CUP  
11. 1S-3062 [18] DIRECTOR-WATER  
12. 2B-0858 [3] PLUG-PIPE  
13. 7N-4448 [6] INSERT (INTAKE)  
14. 5S-7221 [6] INSERT (EXHAUST)  
15. 2P-1262 [12] GUIDE-VALVE  
16. 7N-2597 [1] SPACER  
17. 7S-3206 [6] SEAL-O-RING  
18. 8S-3970 [6] CHAMBER AS  
19. 6N-7263 [1] GASKET-CYLINDER HEAD  
20. 9N-6117 [6] VALVE-INLET (INTAKE)  
21. 8N-0875 [6] VALVE-EXHAUST (EXHAUST)  
22. 5M-2667 [6] GASKET-CHAMBER 4.93MM(.194IN)THK.  
  2S-8959 [6] GASKET-CHAMBER 5.66MM(.223IN)THK.  
  2S-8960 [6] GASKET-CHAMBER 6.3MM(.248IN)THK.  
 

#ZEBP17200018
 

2Y-9517: CYLINDER HEAD GP

2Y9517 CYLINDER HEAD GP
c405575 ZEBP1720
2Y9517 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-7144 [12] SPRING-VALVE  
2. 1W-5300 [12] ROTOCOIL AS (BSC)  
3. 2A-4429 [24] LOCK-RETAINER  
4. 6N-8120 [1] CYLINDER HEAD AS  
5. 0S-1594 [4] BOLT  
6. 5M-2894 [4] WASHER  
7. 1P-6367 [1] COVER  
8. 5S-6735 [1] GASKET  
9. 3B-0623 [6] PLUG-CUP  
10. 3S-8313 [7] PLUG-CUP  
11. 1S-3062 [18] DIRECTOR-WATER  
12. 2B-0858 [3] PLUG-PIPE  
13. 5S-7218 [6] INSERT-VALVE SEAT  
14. 1W-5321 [6] INSERT-VALVE SEAT  
15. 2P-1262 [12] GUIDE-VALVE  
16. 7N-2597 [1] SPACER  
17. 7S-3206 [6] SEAL-O-RING  
18. 8S-3970 [6] CHAMBER AS  
19. 7N-7999 [1] GASKET-CYLINDER HEAD  
20. 5M-2667 [6] GASKET-CHAMBER  
    4.93MM(.194IN)THK
  2S-8959 [6] GASKET-CHAMBER  
    5.66MM(.223IN)THK
  2S-8960 [6] GASKET-CHAMBER  
    6.3MM(.248IN)THK
21. 8N-0875 [6] VALVE-EXHAUST  
22. 4W-8087 [18] SEAL-WATER  
23. 7N-8018 [6] SEAL-WATER  
24. [6] VALVE-INLET  
 

#ZEBP17200019
 

7N-9536: FASTENER GP-CYLINDER HEAD

7N9536 FASTENER GP-CYLINDER HEAD
c226521 ZEBP1720
7N9536 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3306 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9603 [7] BOLT  
2. 1B-7709 C [5] BOLT (LOCATION X)  
3. 1D-4595 B [20] BOLT  
4. 2S-0736 C [25] WASHER-HARD  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75" Bore Cylinder Blocks
1990/12/01
Be Sure To Use Correct Cup Plugs On OR2077, OR2554, And OR3258 Remanufactured 3304 And 3306 Short Blocks
1992/11/01
Cylinder Pack Puller Groups Improved
1993/01/01
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Magazine
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Caterpillar Parts SIS Catalog 3306 :

CYLINDER BLOCK AS
7N-6550 CYLINDER BLOCK AS
CYLINDER BLOCK GP
2Y-9363 CYLINDER BLOCK GP
CYLINDER BLOCK AS
2Y-5235 CYLINDER BLOCK AS
CYLINDER BLOCK GP
8N-3021 CYLINDER BLOCK GP
2Y-8465 ENGINE AR
2Y-8465 ENGINE AR
2Y-9535 ENGINE AR
2Y-9535 ENGINE AR
CRANKSHAFT GP
2Y-5206 CRANKSHAFT GP
COVER GP-CYLINDER BLOCK
2Y-5174 COVER GP-CYLINDER BLOCK
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
CRANKSHAFT BEARING REPLACEMENTS
CAMSHAFT GP
1N-4406 CAMSHAFT GP
PISTON & ROD GP
2P-6272 PISTON & ROD GP
CYLINDER HEAD GP
2Y-6548 CYLINDER HEAD GP
CYLINDER HEAD GP
2Y-9517 CYLINDER HEAD GP

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.