8P8148 LINES GP-PUMP PART OF 8P3072 CONTROL AR-HYDRAULIC AN ATTACHMENT D5B TRACK-TYPE TRACTOR

Pos.	Part No	Qty	Parts name
1.	8T-8919 J	[1]	BOLT (1/2-13X1.75IN)
2.	5P-8245	[2]	WASHER (3MM THK)
3.	2B-0947	[3]	BOLT (1/2-13X2.25IN)
4.	9S-4191	[2]	PLUG-O-RING (9/16-18THD)
	3J-1907	[2]	SEAL-O-RING (11.89MM ID)
5.	3P-1288	[1]	ELBOW
6.	9S-4183	[1]	PLUG (1-1/16-12 THD)
	3D-2824	[1]	SEAL-O-RING (23.47MM ID)
7.	2P-6650	[1]	ELBOW AS
	4J-0526	[1]	SEAL-O-RING (53.57MM ID)
8.	3H-7654	[4]	WASHER (3MM THK)
9.	4J-0520	[2]	SEAL-O-RING (32.92MM ID)
10.	0S-1588	[4]	BOLT (3/8-16X1.25IN)
11.	1P-4577	[2]	FLANGE-HALF
12.	5P-7213	[1]	WASHER-HARD (2MM THK)
13.	6K-6164	[1]	CLIP (SLOT)
	6K-6167	[1]	CLIP (TAB)
14.	2P-9848	[1]	TUBE
15.	5P-0597	[4]	CLAMP
16.	5P-1292 E		HOSE (11CM)
17.	2P-9849	[1]	ELBOW AS
18.	4J-0524	[1]	SEAL (47.22MM ID)
19.	0S-1595	[1]	BOLT (1/2-13X1.25IN)
20.	1P-4578	[2]	FLANGE
	4J-0522	[1]	SEAL-O-RING (37.69MM ID)
21.	2B-0947 J	[1]	BOLT (1/2-13X2.25IN)
22.	3H-5368	[4]	BOLT (7/16-14X1.375IN)
23.	3T-3160 I	[1]	HOSE AS
24.	9S-1366	[1]	BOLT (1/2-13X2.5IN)
25.	4J-0520 J	[1]	SEAL-O-RING (32.92MM ID)
26.	1D-4719	[1]	NUT-FULL (1/2-13 THD)
	0S-1587	[1]	BOLT (1/2-13X1.75IN)
27.	5P-7468	[1]	CLIP (SLOT)
	5P-7469	[1]	CLIP (TAB)
	5P-8444	[1]	GROMMET
28.	1B-2886	[1]	BOLT (1/2-13X3.75IN)
29.	5M-2894	[4]	WASHER (2.5MM THK)
30.	5P-8244	[4]	WASHER (2.5MM THK)
31.	2B-7558	[2]	CORK
32.	5P-1292 E		HOSE (11CM)
33.	3H-7654 J	[2]	WASHER (3MM THK)


			J:OMIT WHEN USED
			WITH SINGLE VALVE
	E		ORDER BY THE CENTIMETER
	I		SEE HOSE FABRICATION GUIDE

#ZEBP17910231

2Y-9975: BULLDOZER AR-ANGLING

BULLDOZER AR-ANGLING

2Y9975 BULLDOZER AR-ANGLING
BULLDOZER S/N 3ZH1-UP
ALSO AN ATTACHMENT

ZEBP17910231 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name



9J-6847 Y	[1]	BLADE GP-ANGLING

8F-6373 Y	[1]	BRACE GP

6J-0679 Y	[1]	FRAME GP-C

2Y-9790	[1]	PLATE-SERIAL NUMBER

4B-4158	[2]	SCREW-DRIVE
Y		SEPARATE ILLUSTRATION

#ZEBP17910232

9J-6847: BLADE GP-ANGLING

BLADE GP-ANGLING

9J6847 BLADE GP-ANGLING
BULLDOZER S/N 3ZH1-UP
PART OF 2Y9975 BULLDOZER AR-ANGLING
AN ATTACHMENT

c230223 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9J-7520	[1]	PLATE ASSEM. (L.H.)
			(Includes)
2.	9J-7524	[1]	SHOE
3.	4H-6286	[4]	BRACKET
4.	5F-0689	[1]	PIN
5.	9J-7519	[1]	PLATE ASSEM. (R.H.)
			(Includes)
6.	9J-7523	[1]	SHOE
7.	5J-6939	[1]	END BIT (R.H.)
			-OR-
	3G-8297 C	[1]	END BIT (R.H.-hot cupped)
8.	9J-6853	[2]	EDGE
9.	4F-0255	[1]	PIN
	3B-4626	[1]	COTTER PIN
10.	5F-0733	[1]	BRACKET
11.	4F-7827	[30]	BOLT
	2J-3506	[30]	NUT
12.	5J-6940	[1]	END BIT (L.H.)
			-OR-
	3G-8298 C	[1]	END BIT (L.H.-hot cupped)
	5P-4020 CH	[1]	PLATE
	4B-4159 CH	[2]	SCREW
	C		INDICATES CHANGE
	H		NOT SHOWN-NOT PART OF 9J6847 BLADE GROUP

#ZEBP17910233

8F-6373: BRACE GP

BRACE GP

8F6373 BRACE GP
BULLDOZER S/N 3ZH1-UP
PART OF 2Y9975 BULLDOZER AR-ANGLING
AN ATTACHMENT

c215717 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4F-1252	[2]	PIN 6 in.(15.24 cm) long
	8S-6377	[2]	PIN 2.50 in.(6.35 cm) long
2.	5J-7276	[2]	SCREW
3.	3B-8489	[4]	FITTING
4.	5J-7279	[2]	BRACE ASSEM.
			(Each Includes)
5.	6F-3908	[1]	HANDLE ASSEM.
6.	8J-4866 C	[1]	LUG
7.	3F-4854	[1]	KNOB
8.	5J-7275	[2]	SCREW
9.	5F-0684	[6]	PIN
10.	4F-0255	[6]	PIN
11.	3B-4626	[6]	COTTER PIN
12.	3B-4632	[2]	COTTER PIN
13.	7B-1619	[2]	NUT
14.	5F-0688	[2]	TUBE ASSEM.
			(Each Includes)
15.	5J-7277	[1]	RETAINER
16.	5F-0705	[2]	PIN ASSEM.
17.	5F-0683	[2]	EYE BOLT
18.	5F-2664	[2]	ARM ASSEM.
			(Each Includes)
19.	9J-4364 C	[1]	NUT
20.	5F-0709	[2]	SUPPORT
21.	5F-0708	[1]	PIVOT
22.	5F-0706	[1]	PIN
23.	5F-0707	[1]	COLLAR
	C		INDICATES CHANGE

#ZEBP17910234

6J-0679: C-FRAME GP

C-FRAME GP

6J0679 FRAME GP-C
BULLDOZER S/N 3ZH1-UP
PART OF 2Y9975 BULLDOZER AR-ANGLING
AN ATTACHMENT

c125370 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
5F-0746	[3]	BRACKET
		(LEFT HAND)
		(PART OF 6J802 "C" FRAME ASSEM.)
6J-0800	[2]	BEARING
		(PART OF 6J802 "C" FRAME ASSEM.)
6F-3183	[2]	CAP
3B-6753	[4]	BOLT
4F-2710	[4]	NUT
6J-9188 C	[1]	BRACKET ASSEM. (L.H.)
4J-2414	[1]	TRUNNION
5J-3526	[2]	BRACKET
5F-0736	[1]	PIN
		(PARTS OF 6J802 ASSEM.)
7J-0154 HC	[1]	BRACKET GROUP
3H-4035	[2]	BLOCK
		(PART OF 7J154 GROUP)
6J-9187 C	[1]	BRACKET ASSEM. (R.H.)
5J-3526	[1]	BRACKET
4J-2414	[2]	TRUNNION
5F-0735	[1]	COLLAR
		(PARTS OF 6J802 "C" FRAME ASSEM.)
6J-0802	[1]	"C" FRAME ASSEM.
5F-0745	[3]	BRACKET
		(RIGHT HAND)
		(PART OF 6J802 "C" FRAME ASSEM.)
C		INDICATES CHANGE FROM PREVIOUS TYPE
H		NOT PART OF "C" FRAME

#ZEBP17910235

9J-6215: MOUNTING GP-RIPPER

MOUNTING GP-RIPPER

9J6215 MOUNTING GP-RIPPER
PART OF 5Y1104 RIPPER AR
AN ATTACHMENT

c622513 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-3390	[4]	STUD-TAPERLOCK
2.	2J-3507	[8]	NUT-FULL (1-8 THD)
3.	7M-9650	[12]	WASHER (6MM THK)
4.	9J-6214	[1]	PLATE AS
5.	5K-8687	[2]	STUD-TAPERLOCK
	3K-9770	[2]	NUT-FULL (1-1/4-7 THD)
	4K-0684	[2]	WASHER-HARD (6MM THK)
6.	3K-7845	[1]	PIN
7.	3B-8489	[3]	FITTING-GREASE
8.	2K-0703	[1]	BAR
9.	0S-1621	[2]	BOLT (1/2-13X1.0IN)
	3B-4508	[2]	LOCKWASHER
10.	3B-5325	[2]	COTTER
11.	2K-6563	[2]	PIN
12.	6D-1915 C	[8]	STUD-TAPERLOCK
13.	2J-3506	[4]	NUT-FULL (3/4-10 THD)
	2S-0115	[4]	WASHER-HARD (5MM THK)
14.	3K-1516	[1]	SEAL-RING
15.	9J-9689	[2]	PIN
16.	2H-6488	[2]	BOLT (1/2-13X5IN)
	1K-6872	[2]	LOCKNUT (1/2-13 THD)
17.	7D-4512	[4]	STUD-TAPERLOCK
18.	4K-3927 B	[10]	SHIM
19.	1D-4629	[4]	BOLT (7/8-9X3.5IN)
	9H-1031	[4]	WASHER-HARD (6.0MM THK)
20.	9J-6609	[1]	DRAWBAR AS
21.	1D-4637	[4]	BOLT (1-8X3.25IN)
22.	9J-6210	[2]	SPACER
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#ZEBP17910236

2Y-9994: RIPPER AR

RIPPER AR

2Y9994 RIPPER AR
RIPPER S/N 62S1-UP
AN ATTACHMENT

ZEBP17910236 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name



8J-7521 Y	[1]	RIPPER GP

2P-3800	[1]	PLATE GP-SERIAL NO
4B-4158	[2]	SCREW-DRIVE
Y		SEPARATE ILLUSTRATION

#ZEBP17910237

8J-2189: TOOTH GP-RIPPER

TOOTH GP-RIPPER

8J2189 TOOTH GP-RIPPER
RIPPER S/N 62S1-UP
PART OF 8J7521 RIPPER
AN ATTACHMENT

c614548 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-5325	[2]	COTTER
2.	8J-2190	[1]	PIN
3.	9J-3139	[1]	SHANK-RIPPER
4.	8E-6358	[1]	PIN-G.E.T.
	1U-2405 C	[1]	RETAINER
5.	6Y-0359	[1]	TIP-RIPPER
	C		CHANGE FROM PREVIOUS TYPE

#ZEBP17910238

8J-7521: RIPPER GP

RIPPER GP

8J7521 RIPPER GP
RIPPER S/N 62S1-UP
8J2189-PAGE 161
PART OF 2Y9994 & 5Y1104 RIPPER ARS. AN ATTACHMENT

c472320 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-6562	[2]	PIN
2.	3B-5325	[4]	COTTER
3.	3B-8489	[7]	FITTING-GREASE
4.	2K-2306	[2]	LINK
5.	9J-9598	[2]	PIN
6.	5K-2657	[1]	LINK AS
7.	8J-2189 Y	[3]	TOOTH GP-RIPPER
8.	8J-7130	[1]	CARRIAGE AS
9.	2K-4615	[1]	BOSS
10.	1J-2315	[1]	BOSS
11.	3K-5702	[2]	GUSSET
12.	5K-7748	[5]	HOLDER-TOOTH
13.	2K-4683	[1]	PIN
14.	1K-6872	[1]	LOCKNUT
15.	8F-8804	[1]	BOLT
	Y		SEPARATE ILLUSTRATION

#ZEBP17910239

5Y-1104: RIPPER AR

RIPPER AR

5Y1104 RIPPER AR
S/N 62S1-UP
AN ATTACHMENT

ZEBP17910239 ZEBP1791

For full view, you need register

Parts for your D5B TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name


8J-1779 Y	[1]	CYLINDER GP

8J-7050 Y	[1]	LINES GP-RIPPER

9J-6215 Y	[1]	MOUNTING GP-RIPPER

8J-7251 Y	[1]	RIPPER GP

1G-1883	[11]	CAP-GREASE

2Y-9790	[1]	SERIAL NUMBER PLATE

4B-4158	[2]	DRIVE SCREWS
Y		SEPARATE ILLUSTRATION