2Y9456 BULLDOZER AR-ANGLING BULLDOZER S/N 27B100-UP AN ATTACHMENT D8L TRACK-TYPE TRACTOR



IMPLEMENTS
BULLDOZER GP
WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
TRUNNION GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
IMPLEMENTS
BULLDOZER GP
C-FRAME GP

TRACK-TYPE TRACTOR D8L TRACK-TYPE TRACTOR 7YB
 D8L TRACTOR 7YB01573-UP (MACHINE) POWERED BY 3408 ENGINE ZEBP1912 D8L 7YB   (1985)

IMPLEMENTS

BULLDOZER GP
3G-6089 BULLDOZER AR-ANGLING
2Y-9188 BULLDOZER AR-STRAIGHT
3G-6090 BULLDOZER AR-ANGLING
2Y-9456 BULLDOZER AR-ANGLING
3G-6088 BULLDOZER AR-ANGLING
TRUNNION GP-BULLDOZER
9J-9640 TRUNNION GP-BULLDOZER
PUSH ARM GP-STABILIZER
4T-9524 PUSH ARM GP-STABILIZER
PUSH ARM GP-RH
3G-6991 PUSH ARM GP-RH
PUSH ARM GP-LH
3G-6995 PUSH ARM GP-LH
LINK GP-STABILIZER
4T-9447 LINK GP-STABILIZER
 

#ZEBP19120290
 

2Y-9456: BULLDOZER AR-ANGLING

2Y9456 BULLDOZER AR-ANGLING
BULLDOZER S/N 27B100-UP
AN ATTACHMENT
ZEBP19120290 ZEBP1912
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
   
   
  3G-6096 Y [1] BLADE GP  
   
  9J-9157 Y [1] BRACE GP-BULLDOZER  
   
  3G-5531 Y [1] C-FRAME GP  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    BACK OF MOLDBOARD-NEAR TOP AT RH END
   
  4B-4158 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#ZEBP19120291
 

3G-6088: BULLDOZER AR-ANGLING

3G6088 BULLDOZER AR-STRAIGHT
BULLDOZER S/N 26B100-UP
AN ATTACHMENT
ZEBP19120291 ZEBP1912
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
   
   
  4T-9524 Y [1] ARM GP-PUSH-STABILIZER  
   
  4T-9585 Y [1] BLADE GP-STRAIGHT  
   
  3T-8686 Y [1] LINES GP-LIFT CYLINDER  
   
  3G-1550 Y [1] LINES GP-TILT CYLINDER  
   
  9J-7623 Y [1] MOUNTING GP-CYLINDER  
   
  9J-9640 Y [1] TRUNNION GP-BULLDOZER  
   
  6P-8989 Y [1] VALVE GP-CYLINDER LH  
   
  6P-8988 Y [1] VALVE GP-CYLINDER RH  
   
  8T-7371 [1] PLATE-SERIAL NUMBER  
    BACK OF MOLDBOARD-NEAR TOP AT RH END
   
  4B-4158 [2] SCREW-DRIVE  
  Y   SEPARATE ILLUSTRATION
 

#ZEBP19120292
 

3G-6096: BLADE GP

3G6096 BLADE GP-ANGLING
BULLDOZER S/N 27B100-UP
9J9093-PAGE 244
PART OF 2Y9456, 3G6089, 3G6090 BULLDOZERS
AN ATTACHMENT
c551709 ZEBP1912
3G6096 BLADE GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-2472 [4] PIN  
  5J-0124 [4] RETAINER  
2. 0S-1566 [8] BOLT  
3. 3G-4929 [1] PIN  
  4J-9118 [1] RETAINER  
4. 4B-4043 [1] BOLT  
5. 8E-6754 [1] CONNECTOR AS  
  8E-6755 [2] BEARING-SLEEVE (42.3MM LG)  
  8E-6756 [2] BEARING-SLEEVE (35.6MM LG)  
6. 9J-9093 Y [1] BIT & CUTTING EDGE GP  
7. 3G-7301 [1] BLADE AS  
  3G-7291 [1] PLATE-WEAR-RH  
  3G-7292 [1] PLATE-WEAR-LH  
  3G-7290 [2] PLATE-WEAR  
8. 3G-7289 [1] SUPPORT  
9. 1U-2534 [2] BRACKET  
10. 4T-5490 C [1] BRACKET  
11. 4T-1721 [2] RETAINER  
12. 1U-2890 [2] BRACKET  
13. 3G-7298 [1] PLATE AS-LH  
  3G-7294 [1] SHOE-LH  
14. 3G-7300 [1] MOLDBOARD  
15. 3G-7297 [1] PLATE AS-RH  
  3G-7293 [1] SHOE-RH  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP19120293
 

4T-9585: BLADE GP-STRAIGHT

4T9585 BLADE GP-STRAIGHT
BULLDOZER S/N 26B100-UP
4T9840-PAGE 244
PART OF 2Y9188, 3G6088 BULLDOZERS
AN ATTACHMENT
c334856 ZEBP1912
4T9585 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-2472 [2] PIN  
2. 4T-9840 CY [1] BIT & CUTTING EDGE GP  
3. 2H-3757 [8] BOLT  
4. 6J-5179 [4] RETAINER  
5. 5J-0697 [2] CONNECTOR  
6. 4T-7534 [2] PIN  
7. 4T-9568 [1] BLADE AS  
8. 4T-9580 [1] SUPPORT  
9. 4T-9570 [2] BIT  
10. 4T-9578 [2] BIT  
11. 4T-9583 [1] SHOE-RH  
12. 3G-6123 [1] BRACKET-RH  
13. 4T-9479 [2] DEFLECTOR  
14. 4T-9445 [1] BRACKET AS (RH)  
  3G-9598 [2] BEARING-SLEEVE  
15. 4T-9439 [1] TRUNNION  
16. 4T-9481 [2] BRACKET AS  
    (EACH INCLUDES)
17. 9J-0123 [1] TRUNNION  
18. 1U-0272 [1] BRACKET-LH  
19. 3G-6418 [1] BRACKET AS (LH)  
  3G-9598 [2] BEARING-SLEEVE  
20. 4T-9579 [2] SUPPORT  
21. 4T-9584 [1] SHOE-LH  
22. 7T-5869 [1] GUARD  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#ZEBP19120294
 

4T-9840: BIT & CUTTING EDGE GP

4T9840 CUTTING EDGE & BIT GP
BULLDOZER S/N 26B100-UP
PART OF 4T9585 BLADE-STRAIGHT
AN ATTACHMENT
c496989 ZEBP1912
4T9840 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8E-4197 [1] BIT-END-RH  
  3G-8291 CA [1] BIT-END-RH (HOT CUPPED)  
2. 9W-4398 [2] EDGE-CUTTING 35MM(1.37IN)THK  
  4T-9587 CA [2] EDGE-CUTTING 28.5MM(1.12IN)THK  
3. 4J-9058 [21] BOLT-PLOW  
4. 9W-4396 [1] EDGE-CUTTING 35MM(1.37IN)THK  
  4T-9586 CA [1] EDGE-CUTTING 28.5MM(1.12IN)THK  
5. 2J-3507 [35] NUT-FULL  
  3K-5234 [35] WASHER-HARD  
6. 8E-4196 [1] BIT-END-LH  
  3G-8292 CA [1] BIT-END-LH (HOT CUPPED)  
7. 4J-9208 [14] BOLT-PLOW  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP19120295
 

9J-9093: BIT & CUTTING EDGE GP

9J9093 CUTTING EDGE & BIT GP
BULLDOZER S/N 27B100-UP
PART OF 3G6096 BLADE
AN ATTACHMENT
c311165 ZEBP1912
9J9093 BIT & CUTTING EDGE GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1U-4183 [1] BIT-END-RH  
  1U-4184 [1] BIT-END-LH  
    -OR-
  9J-1477 A [1] END BIT (RH FORGED)  
  9J-1478 A [1] END BIT (LH FORGED)  
    -OR-
  9J-1539 A [1] END BIT-RH (PENETRATION)  
  9J-1540 A [1] END BIT-LH (PENETRATION)  
    -OR-
  3G-8317 A [1] BIT-END-RH (HOT CUPPED)  
  3G-8318 A [1] BIT-END-LH (HOT CUPPED)  
2. 4J-9058 C [40] BOLT-PLOW  
  2J-3507 [40] NUT-FULL  
  3K-5234 [40] WASHER-HARD  
3. 4T-2987 C [2] EDGE-CUTTING  
4. 4T-2988 C [2] EDGE-CUTTING  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#ZEBP19120296
 

7T-6040: COVER GP-TRUNNION

7T6040 COVER GP-TRUNNION
NOT FOR USE WITH BULLDOZER TRUNNIONS
AN ATTACHMENT
c335269 ZEBP1912
7T6040 COVER GP-TRUNNION Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 6P-8901 [2] COVER  
2. 8S-9093 [12] BOLT  
3. 5P-8250 [12] WASHER  
 

#ZEBP19120297
 

3G-8287: BIT-END-RH

3G8287 BIT-END-RH
HOT CUPPED
FIELD INSTALLATION
ZEBP19120297 ZEBP1912
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
   
  3G-8287 [1] END BIT-RH  
   
  3G-8288 [1] END BIT-LH  
 

#ZEBP19120298
 

9J-9640: TRUNNION GP-BULLDOZER

9J9640 TRUNNION GP-BULLDOZER
PART OF 3G6088, 3G6089, 3G6090 BULLDOZER ARS
AN ATTACHMENT
c488674 ZEBP1912
9J9640 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 7T-2879 [2] TRUNNION AS  
    (EACH INCLUDES)
2. 1U-0210 [1] BEARING  
3. 7X-0346 [4] BOLT  
4. 7T-2654 [1] RETAINER  
5. 7X-0404 [28] BOLT  
 

#ZEBP19120299
 

3G-5531: C-FRAME GP

3G5531 C-FRAME GP
BULLDOZER S/N 27B100-UP
PART OF 2Y9456, 3G6089, 3G6090 BULLDOZERS
AN ATTACHMENT
c551446 ZEBP1912
3G5531 C-FRAME GP Parts scheme
  For full view, you need register

Parts for your D8L TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 7T-2450 C [2] CAP-BEARING  
2. 6B-0388 [4] CAPSCREW  
  3K-9770 [4] NUT-FULL  
3. 3G-5526 [1] C-FRAME AS-LH  
4. 3G-5521 [1] BEARING AS  
  7T-2450 C [1] CAP-BEARING  
5. 1U-3102 [5] BEARING-SLEEVE  
6. 3G-7808 [1] TRUNNION AS-LH  
  9J-0123 [1] TRUNNION  
7. 3G-9626 [1] END-JOINT  
8. 3G-5525 [1] C-FRAME AS-RH  
9. 1U-3096 [1] ADAPTER AS  
  3G-5338 [2] BEARING-SLEEVE  
10. 3G-7807 [1] TRUNNION AS-RH  
  9J-0123 [1] TRUNNION  
11. 1U-3102 [5] BEARING-SLEEVE  
12. 3G-5521 [1] BEARING AS  
  7T-2450 C [1] CAP-BEARING  
13. 8P-9770 [1] PLATE  
14. 3G-4929 [1] PIN  
15. 4J-9118 [1] RETAINER  
16. 4B-4043 [1] BOLT  
17. 3G-9571 [2] KEY  
18. 1A-3103 [32] BOLT  
  7H-3608 [32] NUT  
  5P-8248 [64] WASHER-HARD  
19. 1A-0458 C [2] BOLT  
20. 1U-0725 [1] RETAINER  
21. 8B-5144 [6] BOLT  
  2K-4821 [6] LOCKNUT  
22. 5H-2168 [6] LATCH-PIN  
23. 3G-5528 [2] SLIDER AS  
    (EACH INCLUDES)
24. 9J-9537 [1] BALLSTUD  
25. 3G-5527 [4] PIN AS  
26. 8S-9092 [8] BOLT  
27. 4T-2456 [2] BRACKET AS  
28. 7T-2425 C [24] SHIM  
29. 4K-0684 [4] WASHER-HARD  
30. 3G-4889 [1] PIN-PIVOT  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Special Instruction
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Service Magazine
Special Instruction SEHS9429-01 Available for Spherical Bearings for Bulldozers and Rippers{7551,6050,6313}
1995/01/16

Caterpillar Parts SIS Catalog D8L :

3G-6090 BULLDOZER AR-ANGLING
2Y-9188 BULLDOZER AR-STRAIGHT
3G-6089 BULLDOZER AR-ANGLING
LINKAGE GP-IMPLEMENT
7T-4740 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
7T-4740 LINKAGE GP-IMPLEMENT
LINKAGE GP-IMPLEMENT
3T-2594 LINKAGE GP-IMPLEMENT
MOUNTING GP-CYLINDER
9J-7623 MOUNTING GP-CYLINDER
9W-3728 PULLER AR-PIN
3G-6088 BULLDOZER AR-ANGLING
BLADE GP
3G-6096 BLADE GP
BLADE GP-STRAIGHT
4T-9585 BLADE GP-STRAIGHT
BIT & CUTTING EDGE GP
4T-9840 BIT & CUTTING EDGE GP
BIT & CUTTING EDGE GP
9J-9093 BIT & CUTTING EDGE GP
COVER GP-TRUNNION
7T-6040 COVER GP-TRUNNION
3G-8287 BIT-END-RH
TRUNNION GP-BULLDOZER
9J-9640 TRUNNION GP-BULLDOZER

Truck sale:

Caterpillar D8L, Construction
250,617 USD 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
 
Caterpillar D8L, Construction
- Dozers
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar D8L, Construction
75,000 
Caterpillar D8L, Construction
- Dozers
NMC
CATERPILLAR D8L 1984
 
CATERPILLAR D8L 1984
- TRACK TYPE TRACTORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
1985 CAT D8L
USD $57,950 
1985 CAT D8L

Global Heavy Resources Inc.