SLEEVE D61608 - Case

Case parts catalog

(1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97)

• (8-198) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1825) - CASE UNI-LOADER SKID STEER LOADER (UP TO S/N JAF0069586) (1/87-12/97)

• (8-180) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1830) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/74-12/80)

• (134) - AUXILIARY HYDRAULICS, LOADER ARM & REAR HYDRAULICS W/O DIVERTER VALVE » D61608
• (136) - AUXILIARY HYDRAULICS USED WITH PARKER HANNIFIN VALVE FRONT LOADER HYDRAULICS AND DIVERTER VALVE » D61608
• (142) - AUXILIARY HYDRAULICS USED WITH CESSNA VALVE LOADER ARM AND REAR HYDRAULICS WITHOUT DIVERTER VALVE » D61608
• (144) - AUXILIARY HYDRAULICS USE WITH CESSNA VALVE FRONT LOADER HYDRAULIC AND DIVERTER VALVE » D61608

(1835) - CASE UNI-LOADER SKID STEER LOADER (7/80-12/82)

• (152) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1835B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/82-12/87)

• (8-168) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95)

• (8-48) - AUXILIARY HYDRAULIC CIRCUIT, PRIOR TO P.I.N. JAF0037077 » D61608
• (8-52) - AUXILLARY HYDRAULIC CIRCUIT P.I.N. JAF0037077 THROUGH JAF0037366 » D61608

(1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88)

• (198) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT » D61608
• (200) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT » D61608

(1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85)

• (158) - AUXILIARY HYDRAULIC CIRCUIT, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT » D61608
• (160) - AUXILIARY HYDRAULIC CIRCUIT, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT » D61608

(1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01)

• (08-07) - HYDRAULICS - AUXILIARY SYSTEM, - JAF0102176 » D61608

(1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88)

• (198) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT » D61608
• (200) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT » D61608

(D-70) - BACKHOE (1/77-12/88)

• (20) - D-70 SUPPLY & RETURN HYDRAULIC LINES » D61608

(SD-70) - BACKHOE (1/80-12/88)

• (22) - SD-70 SUPPLY & RETURN HYDRAULIC LINES » D61608

(1818) - CASE UNI-LOADER SKID STEER LOADER (1/87-12/97)

• (8-198) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1825) - CASE UNI-LOADER SKID STEER LOADER (UP TO S/N JAF0069586) (1/87-12/97)

• (8-180) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1830) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/74-12/80)

• (134) - AUXILIARY HYDRAULICS, LOADER ARM & REAR HYDRAULICS W/O DIVERTER VALVE » D61608
• (136) - AUXILIARY HYDRAULICS USED WITH PARKER HANNIFIN VALVE FRONT LOADER HYDRAULICS AND DIVERTER VALVE » D61608
• (142) - AUXILIARY HYDRAULICS USED WITH CESSNA VALVE LOADER ARM AND REAR HYDRAULICS WITHOUT DIVERTER VALVE » D61608
• (144) - AUXILIARY HYDRAULICS USE WITH CESSNA VALVE FRONT LOADER HYDRAULIC AND DIVERTER VALVE » D61608

(1835) - CASE UNI-LOADER SKID STEER LOADER (7/80-12/82)

• (152) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1835B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/82-12/87)

• (8-168) - AUXILIARY HYDRAULIC CIRCUIT » D61608

(1835C) - CASE UNI-LOADER SKID STEER LOADER (7/87-12/95)

• (8-48) - AUXILIARY HYDRAULIC CIRCUIT, PRIOR TO P.I.N. JAF0037077 » D61608
• (8-52) - AUXILLARY HYDRAULIC CIRCUIT P.I.N. JAF0037077 THROUGH JAF0037366 » D61608

(1845) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/75-12/88)

• (198) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT » D61608
• (200) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT » D61608

(1845B) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (7/83-12/85)

• (158) - AUXILIARY HYDRAULIC CIRCUIT, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT » D61608
• (160) - AUXILIARY HYDRAULIC CIRCUIT, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT » D61608

(1845C) - CASE UNI-LOADER SKID STEER LOADER (NORTH AMERICA) (1/85-12/01)

• (08-07) - HYDRAULICS - AUXILIARY SYSTEM, - JAF0102176 » D61608

(1845S) - CASE UNI-LOADER SKID STEER LOADER (1/75-12/88)

• (198) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITHOUT FRONT HYDRAULIC CIRCUIT » D61608
• (200) - AUXILIARY HYDRAULIC CIRCUITS, BASIC HYDRAULIC CIRCUIT WITH FRONT HYDRAULIC CIRCUIT » D61608

(30) - DAVIS FLEETHOE TRENCHER (1/70-12/80)

• (28) - BACKFILL BLADE » D61608

(700) - DAVIS TASK FORCE TRENCHER (1/70-12/82)

• (34) - HIGH SPEED VALVE ASSEMBLY - CONVEYOR MOTOR ASSEMBLY » D61608

(DAVIS) - FLEETLINE 25+4 TRENCHER (1/76-12/78)

• (34) - BACKFILL BLADE » D61608
• (42) - ATTACHING KIT, D-70 BACKHOE TO 25+4 » D61608

(P60) - DAVIS FLEETLINE 30+4 TRENCHER (1/70-12/88)

• (256) - BACKFILL BLADE HYD. CIRCUIT, MECHANICAL ANGLING, USED BEFORE 30+4 S/N 4700, BEFORE 40+4 S/N 3600 » D61608
• (258) - BACKFILL BLADE HYDRAULIC CIRCUIT, MECHANICAL ANGLING, USED ON 30+4 SERIAL NUMBER 4700 AND AFTER » D61608
• (260) - BACKFILL BLADE HYDRAULIC CIRCUIT, HYDRAULIC ANGLING, ONE ANGLE CYLINDER » D61608
• (264) - BACKFILL BLADE HYDRAULIC CIRCUIT, HYDRAULIC ANGLING, TWO ANGLE CYLINDERS » D61608
• (265A) - BACKFILL BLADE HYDRAULIC CIRCUIT, HYDRAULIC ANGLING, TWO ANGLE CYLINDERS » D61608
• (334) - LINE LAYER EQUIPMENT AND OIL COOLER HYD. CIRCUIT, USED BEFORE 30+4 S/N 4700 AND BEFORE 40+4 S/N 3600 » D61608
• (338) - LINE LAYER EQUIP. & OIL COOLER HYD. CIRCUIT, USED ON 30+4 S/N 5210 & AFT. & ON 40+4 S/N 3930 & AFT. » D61608
• (384) - HYDRA-BORER PRESSURE AND RETURN HYDRAULIC CIRCUIT, USES W/O LINE LAYER AND W/O BACKFILL BLADE » D61608
• (388) - HYDRA-BORER PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT » D61608
• (394) - HYDRA-BORER PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, USED ON 30+4 SPECIAL S/N 3761 AND AFTER » D61608
• (430) - PTO HYDRAULIC CIRCUIT, USED WITHOUT BACKHOE » D61608
• (432) - PTO HYDRAULIC CIRCUIT, USED WITH BACKHOE AND BACKFILL BLADE » D61608
• (442) - BACKHOE PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, USED WITH H588566 BACKHOE VALVE » D61608
• (443A) - BACKHOE PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, DEUTZ DIESEL ENGINE SER. NO. 1232821 AND AFTER » D61608
• (448) - BACKHOE PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, USED ON 30+4 SPECIAL SERIAL NO. 3761 AND AFTER » D61608

(SD100) - DAVIS FLEETLINE 40+4 TRENCHER (1/70-12/86)

• (256) - BACKFILL BLADE HYD. CIRCUIT, MECHANICAL ANGLING, USED BEFORE 30+4 S/N 4700, BEFORE 40+4 S/N 3600 » D61608
• (258) - BACKFILL BLADE HYDRAULIC CIRCUIT, MECHANICAL ANGLING, USED ON 30+4 SERIAL NUMBER 4700 AND AFTER » D61608
• (260) - BACKFILL BLADE HYDRAULIC CIRCUIT, HYDRAULIC ANGLING, ONE ANGLE CYLINDER » D61608
• (264) - BACKFILL BLADE HYDRAULIC CIRCUIT, HYDRAULIC ANGLING, TWO ANGLE CYLINDERS » D61608
• (265A) - BACKFILL BLADE HYDRAULIC CIRCUIT, HYDRAULIC ANGLING, TWO ANGLE CYLINDERS » D61608
• (334) - LINE LAYER EQUIPMENT AND OIL COOLER HYD. CIRCUIT, USED BEFORE 30+4 S/N 4700 AND BEFORE 40+4 S/N 3600 » D61608
• (338) - LINE LAYER EQUIP. & OIL COOLER HYD. CIRCUIT, USED ON 30+4 S/N 5210 & AFT. & ON 40+4 S/N 3930 & AFT. » D61608
• (384) - HYDRA-BORER PRESSURE AND RETURN HYDRAULIC CIRCUIT, USES W/O LINE LAYER AND W/O BACKFILL BLADE » D61608
• (388) - HYDRA-BORER PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT » D61608
• (394) - HYDRA-BORER PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, USED ON 30+4 SPECIAL S/N 3761 AND AFTER » D61608
• (430) - PTO HYDRAULIC CIRCUIT, USED WITHOUT BACKHOE » D61608
• (432) - PTO HYDRAULIC CIRCUIT, USED WITH BACKHOE AND BACKFILL BLADE » D61608
• (442) - BACKHOE PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, USED WITH H588566 BACKHOE VALVE » D61608
• (443A) - BACKHOE PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, DEUTZ DIESEL ENGINE SER. NO. 1232821 AND AFTER » D61608
• (448) - BACKHOE PUMP, PRESSURE, AND RETURN HYDRAULIC CIRCUIT, USED ON 30+4 SPECIAL SERIAL NO. 3761 AND AFTER » D61608

(DH5) - CASE TRENCHER (1/77-12/80)

• (046) - AUXILIARY PUMP HYDRAULIC SYSTEM » D61608
• (166) - RD100 SUPPLY LINES (WITH TRENCHER) » D61608
• (168) - RD100 SUPPLY LINES (WITHOUT TRENCHER) » D61608
• (188) - BACKFILL BLADE HYDRAULIC SYSTEM - FRONT MOUNTED WITH TRENCHER » D61608
• (190) - BACKFILL BLADE HYDRAULIC SYSTEM - FRONT MOUNTED WITHOUT TRENCHER » D61608
• (192) - BACKFILL BLADE HYDRAULIC SYSTEM - REAR MOUNTED » D61608
• (208) - HYDRA-BORER HYDRAULIC SYSTEM » D61608
• (158) - SD100 BACKHOE SUPPLY LINES, SWING HYDRAULIC SYSTEM » D61608

(DH5) - CASE TRENCHER (S/N 1187961 & AFTER) (1/80-12/86)

• (4-08) - BACKFILL BLADE SUPPLY AND RETURN LINES » D61608
• (5-20) - BACKHOE SUPPLY & RETURN LINES - REAR MOUNTED » D61608
• (5-22) - BACKHOE SUPPLY & RETURN LINES - FRONT MOUNTED (WITHOUT TRENCHER) » D61608
• (5-24) - BACKHOE SUPPLY & RETURN LINES - FRONT MOUNTED (WITH TRENCHER) » D61608
• (6-06) - HYDRA-BORER SUPPLY AND RETURN LINES (WITHOUT BACKHOE) » D61608
• (6-08) - HYDRA-BORER SUPPLY AND RETURN LINES (WITH REAR MOUNTED BACKHOE) » D61608
• (6-10) - HYDRA-BORER SUPPLY AND RETURN LINES (WITH FRONT MOUNTED BACKHOE) » D61608

(DH7) - CASE TRENCHER (1/79-12/82)

• (5-12) - REAR MOUNTED D-130 SUPPLY AND RETURN LINES, WITH BACKFILL BLADE AND CESSNA VALVE » D61608
• (5-13A) - REAR MOUNTED D-130 SUPPLY AND RETURN LINES, WITH BACKFILL BLADE AND KONTAK VALVE » D61608
• (5-14) - D-130 SUPPLY AND RETURN LINES (WITHOUT BACKFILL BLADE) » D61608
• (5-16) - FRONT MOUNTED RD-130 SUPPLY AND RETURN LINES, WITH BACKFILL BLADE AND CESSNA VALVE » D61608
• (5-17A) - WITH BACKFILL BLADE AND KONTAK VALVE » D61608
• (5-18) - RD-130 SUPPLY AND RETURN LINES (WITHOUT BACKFILL BLADE) » D61608

(MAXI-SNEAKER C) - 25+4XP TRENCHER (1/90-12/92)

• (8-12) - BACKFILL BLADE HYDRAULIC CIRCUIT, USED ON MODELS WITHOUT BACKHOE » D61608
• (8-24) - BACKHOE HYDRAULIC SUPPLY AND RETURN LINES, USED ON MODELS WITH SD-70 BACKHOE » D61608