PIN R45895 - Case

Dormer R4589.5 Multi-Application MPX Solid Carbide Drill, Short Length, Cutting Diameter 9.5 mm, Flute Length 47 mm, Total Length 89 mm
Dormer Short length drill bit has a drilling depth of 3 times its diameter and offers increased rigidity for heavy feed-rate applications. || Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS) || Titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling || Self-centering 140-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging || Drill bit conforms to DIN 6537 k standard

Dormer R4589.5 Multi-Application MPX Solid Carbide Drill, Short Length, Cutting Diameter 9.5 mm, Flute Length 47 mm, Total Length 89 mm
Short length drill bit has a drilling depth of 3 times its diameter and offers increased rigidity for heavy feed-rate applications. || Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS) || Titanium aluminum nitride (TiAlN) coating provides wear and corrosion resistance in high-speed or heavy feed-rate drilling || Self-centering 140-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging || Drill bit conforms to DIN 6537 k standard

Bendix R45895 Select Brake Caliper
All hardware and components included for quick, mistake-proof installation || Sleeves, bushings and guide bolts are pre-lubed and pre-assembled where applicable || Noise-damping shims and/or lubricant included along with pad hardware || Disassembled, cleaned, repaired and assembled to the most rigorous quality and consistency standards in the industry || 100% tested for leakage and individually wrapped in VCI (Vapor Corrosion Inhibitor) paper for maximum shelf life