1096680 KIT-SWITCH Caterpillar parts 914G, 924F, 924G, 924GZ, 924H, 928F, 928G, 928HZ, 930G, IT14G, IT24F, IT28G KIT
Rating:
Alternative (cross code) number:
CA1096680
109-6680
1096680
CA1096680
109-6680
1096680
Weight: 0.37 pounds 0 kg.
Buy KIT-SWITCH 1096680 Caterpillar genuine, new aftermarket tractor parts with delivery
COMPACT WHEEL LOADER, WHEEL LOADER,
Compatible equipment models: 1096680:
Number on catalog scheme:
22
For full view, you need register
Information:
Drift of Bowl Cylinders
Note: Run the engine at low idle in order to check the drift of the bowl cylinders.With the engine at low idle, raise the cutting edge of the bowl 152 to 254 mm (6 to 10 inch) above the ground. Then move the control lever to the HOLD position and check the drift of the bowl cylinders. After three minutes, put a mark on the side of the bowl. Place the mark at the bottom of the draft arm. After five minutes, put a mark on the side of the bowl. Measure the drift. Make the measurement 152.4 mm (6.00 inch) from the front of the bowl side. The drift should be 3.5 mm (.14 inch).
Note: Run the engine at low idle in order to check the drift of the bowl cylinders.With the engine at low idle, raise the cutting edge of the bowl 152 to 254 mm (6 to 10 inch) above the ground. Then move the control lever to the HOLD position and check the drift of the bowl cylinders. After three minutes, put a mark on the side of the bowl. Place the mark at the bottom of the draft arm. After five minutes, put a mark on the side of the bowl. Measure the drift. Make the measurement 152.4 mm (6.00 inch) from the front of the bowl side. The drift should be 3.5 mm (.14 inch).
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
914G, IT14G, IT14G2
914G, IT14G2
910G, 914G, 928G, 938G, CP-433E, CP-44, CP-533E, CP-56, CP-573E, CP-64, CP-663E, CP-76, CS-423E, CS-433E, CS-44, CS-531D, CS-533D, CS-533E, CS-54, CS-56, CS-563D, CS-563E, CS-573D, CS-583D, CS-583E, C...
IT14G, IT14G2
924K, 928G, 928HZ, 930G, 930K, IT28F, IT28G
120M, 12M, 140M, 140M 2, 14M, 160M, 160M 2, 16M, 24H, 24M, 525B, 525C, 535B, 535C, 545, 545C, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 824K, 825G, 825G II, 825H, 825K, 826G, 8...
928G, 928HZ, IT28G
928G, IT28G
14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 924G, 924GZ, 924H, 924HZ, 928H, IT28G
924G, 924GZ, 924H, 924HZ
924G, 924GZ, 924H, 924HZ
928HZ, 930G
1096682
KIT-UPPER AS
924F, 928F, IT24F
924F, 928F, IT24F
814F, 814F II, 815F, 815F II, 816F, 816F II, 924F, 928F, 950F, 950F II, 960F, 966F, 966F II, 970F, IT18F, IT24F, IT28F, R1300, R1300G, R1300G II, R1600, R1600G, R1600H
1612304
KIT-PIN
814F, 815F, 816F, 924F, 950F II, 966F, 966F II, 970F, IT24F
814F, 815F, 816F, 924F, 950F II, 966F, 966F II, 970F, IT24F
621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725C, 730C, 814F, 815F, 816F, 924F, 938F, 950F II, 960F, 966F, 966F II, 970F, IT24F, IT28F, IT38F, R1300, R1300G, R1300G II
924F, 924G, 924GZ, 928G, IT24F, IT28G
1046753
KIT-THICK DISC
924F, 924G, 924GZ, IT18F, IT24F
924F, 924G, 924GZ, IT18F, IT24F
814F, 815F, 816F, 924F, 950F II, 960F, 966F II, 970F, IT24F, IT28F, R1300G, R1300G II
924F, 924G, 924GZ, 924H, 924HZ, 924K, 928G, 928H, 928HZ, 930G, 930K, 938H, 938K, IT24F, IT28G, IT38H
816F, IT24F
IT24F
1492398
KIT-AIR COMPRESSOR
725, 730, 735, 740, 814F, 815F, 816F, 824G, 825G, 826G, 914G, 924F, 924G, 924GZ, 928G, 938F, 938G, 938G II, 950F II, 950G, 950G II, 960F, 962G, 962G II, 966F II, 966G, 966G II, 970F, 972G, 972G II, 98...
725, 730, 735, 740, 814F, 815F, 816F, 824G, 825G, 826G, 914G, 924F, 924G, 924GZ, 928G, 938F, 938G, 938G II, 950F II, 950G, 950G II, 960F, 962G, 962G II, 966F II, 966G, 966G II, 970F, 972G, 972G II, 98...
1096681
KIT-HEATER
914G, 924F, 924G, 924GZ, 924H, 928F, 928G, 928HZ, 930G, IT14G, IT24F, IT28G
914G, 924F, 924G, 924GZ, 924H, 928F, 928G, 928HZ, 930G, IT14G, IT24F, IT28G