AVSPARE.COM
parts catalog

HOSE 2140695 - Caterpillar



2140695 HOSE Caterpillar parts 3054, C4.4 HOSE
Rating:
85
Alternative (cross code) number:
CA2140695
214-0695
2140695
Caterpillar 2140695 HOSE
Weight: 0.63 pounds 0 kg.

Buy HOSE 2140695 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible models Caterpillar: 2140695:

GENERATOR SET  3054   C4.4   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:


Illustration 1 g02548868
Typical example
Table 1
Specification for 263-5054 Cylinder Head Gp and 223-7263 Cylinder Head
Item Qty Part Specification Description
- - - The following bolts are 194 mm (7.6 inch) long: bolt 1 through bolt 10, 15, 17, 19, 21, 23, and 25
The following bolts are 216 mm (8.5 inch) long: bolt 11 through bolt 14, 16, 18, 20, 22, 24, and 26
Apply black Loctite Graphite-50 to the bolt threads and both sides of the hard washers.
Use the following procedure to tighten the bolts of the cylinder head:
Tighten the bolt 1 through bolt 26 in a numerical sequence to 270 15 N m (200 11 lb ft).
Tighten the bolt 1 through bolt 26 in a numerical sequence to 450 15 N m (330 11 lb ft).
Again, tighten the bolt 1 through bolt 26 in a numerical sequence to 450 15 N m (330 11 lb ft).
The flatness of the cylinder head should be within a total of 0.13 mm (0.005 inch). Also, the flatness of the cylinder head should be within a maximum of 0.05 mm (0.002 inch) for any 150 mm (6.0 inch) span.
Illustration 2 g02548900
Table 2
Item Qty Part Specification Description
A - - Cylinder head thickness:
Thickness of a new cylinder head is 120.00 0.15 mm (4.724 0.006 inch)
Minimum thickness of a used cylinder head is 119.50 mm (4.705 inch)
Illustration 3 g02548907
(1) Sleeve bearing joint
(2) Oil gallery
(3) Oil holes
(4) Sleeve bearing
Camshaft bearings must be installed into their correct position. Failure to do so will result in engine damage.
Illustration 4 g02548916
Table 3
Item Qty Part Specification Description
B - - Orientation of the sleeve bearing joint is 20 5 degrees above horizontal
C - - Bore for camshaft sleeve bearing is 90.985 0.020 mm (3.5821 0.0008 inch)
Illustration 5 g02548921
Table 4
Item Qty Part Specification Description
4 7 216-5582 Bushing The depth of installation of the sleeve bearings is important. Install sleeve bearings to the following depths:
Dimension (D): 8.0 0.5 mm (0.31 0.02 inch)
Dimension (E): 178.1 0.5 mm (7.01 0.02 inch)
Dimension (F): 349.5 0.5 mm (13.76 0.02 inch)
Dimension (G): 521.0 0.5 mm (20.51 0.02 inch)
Dimension (H): 692.4 0.5 mm (27.26 0.02 inch)
Dimension (J): 863.8 0.5 mm (34.01 0.02 inch)
Dimension (K): 1035.3 0.5 mm (40.76 0.02 inch)
Illustration 6 g01623607
Table 5
Item Qty Part Specification Description
5 - - Before assembly, apply 4C-9506 Retaining Compound to press fit diameter of the lower end of six injector sleeves.
Press the injector sleeve to the bottom of the face (6).
V - - Installation depth for the cup plugs is 1.25 0.25 mm (0.050 0.010 inch)

Caterpillar parts catalog:

Caterpillar parts catalog
3054 Marine-Generator Set Engine CHN00001-UP
C4.4 Marine Gen Set L1K00001-UP
C4.4 Marine Auxiliary Generator Set Military MMC00001-UP


Parts hose Caterpillar catalog:

5P1259 HOSE
12M, 140G, 140M, 245B, 24M, 3114, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3306, 3306B, 3406, 3406B, 3406E, 3408, 3408B, 3412, 3412C, 3412D, 3412E, 446, 515, 518, 518C, 525, 554, 574, 594H, ...
2039866 HOSE
3054, 3054B, 3056
5P1465 HOSE
120B, 120H, 12H, 12M, 135H, 140B, 140H, 140M, 143H, 14H, 160H, 160M, 163H, 16H, 24H, 3054, 3056, 5110B, 5130B, 5230B, 572R, 572R II, 583R, 583T, 587R, 587T, 621G, 623G, 627G, 631D, 631G, 637D, 637G, 6...
2451236 HOSE
C1.5, C2.2, C4.4
2652757 HOSE
C4.4, C6.6, C9
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.