AVSPARE.COM
parts catalog

LINES GP-FRONT 2559641 - Caterpillar



2559641 LINES GP-FRONT Caterpillar parts 325C LINES
Rating:
17
Alternative (cross code) number:
CA2559641
255-9641
2559641
Caterpillar 2559641 LINES GP-FRONT

Buy LINES GP-FRONT 2559641 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2559641:

EXCAVATOR  325C   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Failure to comply to the rated load can cause possible personal injury or property damage. Review the rated load of a particular work tool before performing any operation. Make adjustments to the rated load as necessary for non-standard configurations.
Note: Rated loads should be used as a guide. Attachments, uneven ground conditions, soft ground conditions, or poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.Rated loads are based upon a standard machine with the following conditions:
proper lubricants
full fuel tank
enclosed ROPS
80 kg (176 lb) operator
23.5 R25 L-3 tires or equivalentRated loads will vary for different attachments. Consult your Caterpillar dealer about the rated load for specific attachments.For North America, the rated operating load is defined by SAE "J1197" (February 1991) as 50% of the full turn static tipping load.For Europe, the rated operating load is defined by CEN "474-3" as 60% of the full turn static tipping load.
Illustration 1 g00275722
The clearance and the reach are given for each implement at the maximum lift height. Clearance (A) is measured from the ground to the bottom edge of the implement. Reach (B) is measured from the front of the front tire to the front vertical edge of the implement.The following table provides the rated operating loads for the standard machine (North American configuration).
Table 1
Rated Load ( IT62G Pallet Fork)    
Part Number (Pallet Fork)     115-7448    
Maximum Clearance
A    
3790 mm (149 inch)    
Full Reach
B    
1117 mm (44 inch)    
Overall Length With Fork on Ground    
8755 mm (345 inch)    
Maximum Load    
4141 kg (9129 lb)    Reference: Refer to Special Publication, GELQ0149, "Wheel Loader Fork Application Guide" for the rated loads of other machine configurations.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
325 CR SUPPLEMENT FOR TRACK-TYPE EXCAVATOR /COMPACT RADIUS HYDRA/ BKW00326-UP (MACHINE)
325C CR TRACK-TYPE EXCAVATOR /COMPACT RADIUS HYDRA/ BKW00343-UP (MACHINE)
325C L CR TRACK-TYPE EXCAVATOR /COMPACT RADIUS HYDRA/ BKW00328-UP (MACHINE)


Parts lines Caterpillar catalog:

1590285 LINES GP-TURBOCHARGER OIL
3126B, 3126E, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D MH, AP-1055D, AP-755, BG-2455D, BG-260D, C7, M325C MH, M325D L MH, M325D MH, PM-...
1797799 LINES GP-FRONT
325C, 325C FM, M325C MH
1905811 LINES GP-AIR INLET & EXHAUST
322C, 322C FM, 325C, 325C FM, M325C MH
1624467 LINES GP-BLADE CYLINDER
321C, 321D LCR, 325C, 328D LCR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.