AVSPARE.COM
parts catalog

TUBE AS 2559776 - Caterpillar



2559776 TUBE AS Caterpillar parts TUBE
Rating:
26
Alternative (cross code) number:
CA2559776
255-9776
2559776
Caterpillar 2559776 TUBE AS

Buy TUBE AS 2559776 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

The abbreviations listed below follow S.A.E. J754 nomenclature. The classifications follow S.A.E. J183 classifications. The MIL specifications are U.S.A. Military Specifications. These definitions will be of assistance in purchasing lubricants.Engine Oils (CD or CD/TO-2)
Use oils that meet the Engine Service Classification CD (MIL-L-2104D) or Caterpillar Tractor Co. CD/TO-2 Classification.Consult the "EMA Lubricating Oils Data Book," Form SEBU5939, for a listing of CD oil brands.The percentage of sulfur in the fuel will affect the engine oil recommendations. If the fuel has over 0.5% sulfur content, the CD engine oil must have a TBN of 20 times the percentage of fuel sulfur (TBN as measured by the ASTM D-2896 method).Higher TBN values are essential to retard the corrosive damage to metal engine parts.Your oil supplier should be able to furnish the correct oils.Hydraulic Implement System (WGF)
Use only water-glycol fluids (WGF) with blends of water, selected glycols and special additives. The fluid is fire resistant if the water content is properly maintained.
Water-glycol fluid must not be mixed with petroleum base oil. If the system becomes contaminated with petroleum based products, shut down the machine immediately. Oil contamination mixed with water-glycol will cause a sludge that plugs filters. Also, oil will decrease the effectiveness of the fluid for fire resistance.Water content must be maintained in the area of 40%. Avoid mixing commercially available water-glycol fluid brands if possible, since properties do vary. Your fluid supplier can furnish information regarding the necessary tests for proper maintenance of the fluid being used.Contact your Caterpillar dealer for proper procedure to flush and clean the system.
Hydrostatic Transmission Oils (HYDO)
Use Engine Service Classification CC (MIL-L-2104B), CC/SF (MIL-L-46152B), CD (MIL-L-2104D) or industrial-type hydraulic oils that are certified by the oil supplier to have antiwear, antifoam, antirust, and antioxidation additive properties for heavy duty use.Lubricating Grease (MPG)
Use Multipurpose-type Grease (MPG). Multipurpose-type grease which contains 3% to 5% molybdenum disulfide is preferred. NLGI No. 2 Grade is suitable for most temperatures. Use NLGI No. 1 or No. 0 Grade for extremely low temperatures.


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.