AVSPARE.COM
parts catalog

TUBE AS 2559779 - Caterpillar



2559779 TUBE AS Caterpillar parts TUBE
Rating:
41
Alternative (cross code) number:
CA2559779
255-9779
2559779
Caterpillar 2559779 TUBE AS

Buy TUBE AS 2559779 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Hydraulic Implement System
Change Fluid Filter and Clean Strainer
Hot fluid can cause burns.At operating temperature, the hydraulic tank is hot and under pressure.Remove the fill cap only when the engine is stopped, and the cap is cool enough to touch with your bare hand. Remove the fill cap slowly to relieve pressure.Hot fluid and components can cause personal injury. Do not allow hot fluid or components to contact skin.
1. Lift the cover and remove the fill cap. Check the cap seal. Replace it if it is damaged. 2. Remove the strainer. Wash the strainer in clean warm water. 3. Remove the bottom tank guard cover.4. Remove the drain plug. Open the drain valve and allow the fluid to drain. Close the valve and reinstall the drain plug. Reinstall the tank cover.5. Change the hydraulic implement filter. Refer to "Every 500 Service Hours or 3 Months" for procedure. 6. Install the strainer.7. Fill the tank with water-glycol fluid. See "Refill Capacities."8. Maintain the fluid level to the ADD mark in the sight gauge.9. Install the fill cap and close the cover.


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.