AVSPARE.COM
parts catalog

TUBE AS 2559789 - Caterpillar



2559789 TUBE AS Caterpillar parts TUBE
Rating:
11
Alternative (cross code) number:
CA2559789
255-9789
2559789
Caterpillar 2559789 TUBE AS

Buy TUBE AS 2559789 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Bucket Positioner - Tilt Adjustment
Use caution to avoid possible personal injury when adjusting the bucket positioner.Stop the engine and lower all equipment to relieve the hydraulic pressure.Apply the parking/secondary brake and block the tires to prevent sudden movement of the machine.Keep unauthorized personnel off the machine.
1. Restart the engine. Lower the bucket to the ground. 2. Position the bucket at the desired angle to the ground. Stop the engine and turn the key to ON. Move the tilt control to TILT BACK detent. 3. Loosen two bracket bolts (1). Move the tube assembly (2) toward the bucket. When the switch aligns with the magnet, the tilt lever should move from the TILT BACK to the HOLD position. 4. To test the adjustment, start the engine. Raise and dump the bucket. Move the tilt control lever to TILT BACK detent.5. When the pre-set bucket angle is reached, the tilt control lever should return to HOLD.Bucket Lift Kickout
Use caution to avoid possible personal injury when adjusting the bucket lift kickout.Keep personnel off the machine. Clear the area when working under or around the bucket linkage.With the bucket raised, proper support must be provided for the bucket and/or the linkage.
1. Start the engine. Raise the bucket to the desired height and stop the engine.2. Block the bucket and the linkage. 3. Loosen the plate clamp bolts. Align the plate and the the magnet with the switch assembly. 4. Move the magnet away from the switch to increase, or toward the switch to decrease the bucket lift kickout height.5. Tighten the bolts. Check the adjustment. 6. Start the engine and move the bucket lift control to the RAISE detent.7. At the pre-set lift height, the control lever should return to HOLD.


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.