AVSPARE.COM
parts catalog

BRACKET GP-MOUNTING 2559872 - Caterpillar



2559872 BRACKET GP-MOUNTING Caterpillar parts 321C, 328D LCR BRACKET
Rating:
12
Alternative (cross code) number:
CA2559872
255-9872
2559872
Caterpillar 2559872 BRACKET GP-MOUNTING

Buy BRACKET GP-MOUNTING 2559872 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 2559872:

EXCAVATOR  321C   328D LCR   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:


Illustration 6 g00500380
Dimension (A) is 12.15 0.06 mm (0.478 0.002 inch).
Adjust pins (63) to length (A). Apply 1P-0808 Multipurpose Grease to pins (63) .
Illustration 7 g00499516
Install plate (58), coil assembly (57), plate (56), retainer (55), and four bolts (54) .
Apply 8T-0065 RTV Silicone Sealant to all wire holes.
Install bracket (53) .
Apply 9S-3263 Thread Lock Compound to bolt (50). Install bolt (50) .Note: Make sure that you install each lever assembly in the correct location.
Install lever assembly (49) as a unit.
Install pin (52) and spring clip (51). Apply 1P-0808 Multipurpose Grease to pin (52) .
Illustration 8 g00499508
Apply 9S-3263 Thread Lock Compound to swivel (43). Install swivel (43) and spacer (35) on plate (37) .
Install snap ring (45), washer (48), adapter (46), and snap ring (45) on plunger (47) .
Install springs (41) and two plunger assemblies (44) .
Install springs (38), washer (39), washer (40), pins (42), and nuts (36) .
Illustration 9 g00500381
Dimension (B) is 12.15 0.06 mm (0.478 0.002 inch). Dimension (C) is 6.35 0.06 mm (0.250 0.002 inch).
Adjust plunger assemblies (44) to length (C). Apply 1P-0808 Multipurpose Grease to the contact surfaces of plunger assemblies (44) .
Adjust pins (42) to length (B). Apply 1P-0808 Multipurpose Grease to pins (42) .
Illustration 10 g00499514
Install plate (34), coil assemblies (33), plate (32), retainer (31), and four bolts (30) .
Apply 8T-0065 RTV Silicone Sealant to all wire holes.
Install bracket (29) .
Apply 9S-3263 Thread Lock Compound to bolt (26). Install bolt (26) .Note: Make sure that you install each lever assembly in the correct location.
Install lever assembly (25) as a unit.
Install pin (28) and spring clip (27). Apply 1P-0808 Multipurpose Grease to pin (28) .
Illustration 11 g00499506
Apply 9S-3263 Thread Lock Compound to swivel (24). Install swivel (24) and spacer (20) on plate (22) .
Install pins (23), and nuts (21) .
Illustration 12 g00500383
Dimension (D) is 12.15 0.06 mm (0.478 0.002 inch).
Adjust pins (23) to length (D). Apply 1P-0808 Multipurpose Grease to pins (23) .
Illustration 13 g00499501
Install plate (19), plate (18), retainer (17), and four bolts (16) .
Install bracket (15) .
Apply 9S-3263 Thread Lock Compound to bolt (12). Install bolt (12) .Note: Make sure that you install each lever assembly in the correct location.
Install lever assembly (11) as a unit.
Install pin (14) and spring clip (13). Apply 1P-0808 Multipurpose Grease to pin (14) .
Illustration 14 g00499500
Install three boots (10) .
Install control rods (6), (7), and (8). Tighten nuts (9) .
Install switch assembly (3) in handle assembly (4) .
Install handle assembly (4) and screws (5) on control rod (6) .
Install the wires in harness connector (1). Make sure that you install each wire in the correct location. It is important to install each wire in the correct location.
Install wedge (2) in harness connector (1) .End By: Install the hydraulic control. Refer to Disassembly and Assembly, "Pilot Operated Hydraulic Control - Install".

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
328D LCR Excavator GTN00001-UP (MACHINE) POWERED BY C7 Engine
328D LCR Excavator MKR00001-UP (MACHINE) POWERED BY C7 Engine
321C LCR SUPPLEMENT FOR EXCAVATORS /LOADER FRONT/ KCR00001-UP (MACHINE)
320C LCR SUPPLEMENT FOR EXCAVATOR /10M SHORT REACH FRON/ MCF00001-UP (MACHINE)


Parts bracket Caterpillar catalog:

8Y7392 BRACKET
416B, 426B, 428B, 436B, 446, 446B, D6H
5Q4455 BRACKET AS
312B, 320B FM LL
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.