AVSPARE.COM
parts catalog

CONT GP 2559877 - Caterpillar



2559877 CONT GP Caterpillar parts CONT
Rating:
46
Alternative (cross code) number:
CA2559877
255-9877
2559877
Caterpillar 2559877 CONT GP

Buy CONT GP 2559877 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Light Switch - Controls the lighting circuit. Pull the switch out to turn the lights ON. Push it in to turn the lights OFF.Circuit Breaker and Fuses
Circuit Breaker Reset - Push the button in to reset the circuit breaker. If working properly, button will remain depressed. If button does not stay in, or comes out shortly after being reset, have appropriate electrical circuit checked. Fuses - Replace any fuse if the element is broken and/or the circuit is in does not function. Fuses and their ampere ratings are listed below. 1. Front Windshield Wiper Fuse - 7.5 ampere fuse. 2. Rear Windshield Wiper Fuse - 7.5 ampere fuse.Windshield Wiper/Washer (If Equipped)
Front Windshield Wiper (1.) - Controls the front windshield wiper. Pull the knob out to first notch for slow wiper speed. Pull out to second notch for fast wiper speed. Push the knob in for off. Front Windshield Washer (2.) - Controls the front windshield washer. Turn the windshield wiper on. Push the knob to spray fluid on the window, to wash off the dirt. Rear Windshield Wiper (3.) - Controls the rear windshield wiper. Pull the knob out to first notch for slow wiper speed. Pull out to second notch for fast wiper speed. Push the knob in for off. Rear Windshield Washer (4.) - Controls the rear windshield washer. Turn the windshield wiper on. Push the knob to spray fluid on the window, to wash off the dirt.Windshield Washer Fluid Bottle
The washer fluid bottle is located on the right side of the cab near the operator's seat. Look at the bottle to check quantity.Remove the bottle cap to add fluid.Use Caterpillar washer fluid to prevent system from freezing.Horn
Horn - Push the knob down to sound the horn. Use the horn to alert or to signal personnel.Back-up Alarm
Back-up Alarm The alarm will sound when the transmission control lever is in the reverse position. It is used to alert people behind the machine that it is backing up.A three position adjustable switch at the rear of the back-up alarm regulates its volume. (1) is High, (2) is Low and (3) is Medium.The alarm is set at the highest sound level when shipped from the factory.Heating (If Equipped)
Fan Control (1.) - This switch controls the two speed blower fan motor. Low Speed - Move the switch to this symbol for low speed. High Speed - Move the switch to this symbol for high speed. Heating Variable (2.) - Turn the knob anywhere between LOW (left) and MAXIMUM heat (right).Dome Light (If Equipped)
Interior Dome Light - Move the switch back to turn the light on.Seat Adjustment (If Equipped with Suspension Seat)
The seat must be adjusted at the beginning of each shift, or when operators change.Adjust the seat to allow full travel of all pedals with the operator seated against the seat back.The seat must be adjusted with the operator seated.
1. Pull lever (1) to slide the seat forward or backward.2. Move lever (2) to the right for a firmer


Parts cont Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.