AVSPARE.COM
parts catalog

CYLINDER & LINES GP-BOOM 2559972 - Caterpillar



2559972 CYLINDER & LINES GP-BOOM Caterpillar parts 307C CYLINDER
Rating:
56
Alternative (cross code) number:
CA2559972
255-9972
2559972
Caterpillar 2559972 CYLINDER & LINES GP-BOOM

Buy CYLINDER & LINES GP-BOOM 2559972 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 2559972:

MINI HYD EXCAVATOR  307C   Caterpillar
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tools Part Number Description Qty
A 6V-2156 Link Bracket 1
B 8S-9906 Ratchet Puller 1
At operating temperature, the hydraulic tank is hot and under pressure.Hot oil and components can cause personal injury. Do not allow hot oil or components to contact skin.Remove the filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand. Remove the filler cap slowly in order to relieve pressure.
Note: Install a cap or a plug on all lines, hoses, wires, and tubes in order to prevent foreign materials from entering the system.
Remove the floorplate.
Drain the hydraulic tank into a suitable container for storage or disposal.
Release the pressure from the hydraulic system. Refer to Operation and Maintenance Manual for the proper procedure.
Remove the coupling assembly for the steering pump .
Illustration 1 g00625121
Remove eight bolts (1) and the four half flanges. Disconnect two hydraulic hoses (2) from the steering pump.
Illustration 2 g00625151
Illustration 3 g00625154
Remove hydraulic tubes (3) from the steering pump.
Remove two hydraulic tubes (4) and one clip from the steering pump.
Illustration 4 g00625165
Disconnect hydraulic fitting (5) from the steering pump.
Illustration 5 g00625168
Disconnect two hydraulic lines (6) from the steering pump.
Illustration 6 g00625170
Illustration 7 g00023104
Illustration 8 g00625171
Remove three screws (7) and remove liner (8).
Install Tooling (A) and (B), as shown.
Install two straps in order to ensure balance.
Illustration 9 g00625279
Remove six bolts (9) from the flange on the steering pump.
Remove the steering pump from the machine. The weight of the steering pump is 193 kg (425 lb).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
307C & 307C SB Excavators BCM00001-UP (MACHINE) POWERED BY 4M40 Engine


Parts cylinder Caterpillar catalog:

1362463 CYLINDER AS
307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.