AVSPARE.COM
parts catalog

EXTENSION FLAT (front L.H.) 5V3389 - Caterpillar



5V3389 EXTENSION FLAT (front L.H.) Caterpillar parts 920 EXTENSION
Rating:
15
Alternative (cross code) number:
CA5V3389
5V-3389
5V3389
Caterpillar 5V3389 EXTENSION FLAT (front L.H.)
Weight: 1 pounds 0 kg.

Buy EXTENSION FLAT (front L.H.) 5V3389 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 5V3389:

WHEEL LOADER  920   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Inside Corners (Lower Front Of Cab)
Illustration 17. Typical Cracks Inside Front Windshield (Bottom left corner at door)
(6) Rubber Seal. (11) Front windshield. (12) Door area. (PP) Cracks (typical).
Illustration 18. Typical Cracks Inside Front Windshield (Bottom right corner at window)
(2) Plate (Illustration 3). (11) Front windshield. (13) Right window area. (W) 2.0 mm (.08 in) weld. (PP) Cracks (typical). (XX) 20 mm (.8 in) long, at 40 mm (1.6 in) intervals.The inside corners are at location (B) shown in Illustration 1.If cracks exist at inner plate of right side on location (B), fabricate plate (2), and bend the plate to fit the shape of the cab frame.1. Open window and lock into roof.2. If cracks are present in the left corner, remove rubber seal (6).
Illustration 19. Example Weld
(QQ) Weld. (RR) Grind.3. Grind out the cracks, and fill V-groove with weld.4. Grind the weld area smooth. Refer to Illustration 19.5. If cracks are present in the right corner, remove rubber seal (6).6. Grind out the cracks, and fill V-groove with weld.7. Grind the weld area smooth. Refer to Illustration 19.8. Weld plate (2) on the crack. Refer to Illustration 18.9. Clean the weld area. Apply a primer and finish coat of paint.10. Install rubber seal (6).Mounting Area For Assist Handle (Grab Iron)
Illustration 20. Mounting Area For Assist HandleThe mounting surface for assist handle is location (C). Refer to Illustration 1.
Illustration 21.
(14) Bolt. (15) Washer. (16) Assist handle. (B1) Weld area to be ground smooth.1. Remove two bolts (14), washers (15) and assist handle (16).2. Grind and finish the cracks. Fill V-groove with weld. Refer to Illustration 16.3. Grind the weld area smooth on surface (B1) where assist handle (16) is mounted.4. Install assist handle (16) using two bolts (14) and washers (15).5. Weld the bracket of the assist handle to the cab. Refer to Illustration 20.6. Clean slag from welded area. Apply a primer and finish coat of paint.Front Lower Corner Of Cab Door Frame
Front lower corner of cab door frame is location (D). Refer to Illustration 1.
Illustration 22. Front Lower Corner Of Cab Door Frame
(6) Rubber seal (17) Screws for floor mat holder. (18) Floor mat holder.1. Remove four screws (17), floor mat holder (18) and rubber seal (6) from the lower cab door frame.
Illustration 23. (19) Rubber stopper.2. If distance between cracks and rubber stopper (19) is less than 40 mm (1.6 in) remove rubber stopper (19).3. Grind and finish the cracks. Fill V-groove with weld. Refer to Illustration 16.
Illustration 24. Drill 5.0 mm (.20 in) holes (C1) on either side of crack in outer plate.4. Drill/grind out holes (C1) at only outer plate on both sides of the cracks, and fill with weld.
Illustration 25. Weld example using drilled holes.
(QQ) Weld. (RR) Grind surface. (C1) Drilled holes (5.0 mm (.20 in).5. Grind and finish the holes. Refer to Illustration 25.
Illustration 26. Plate Installation.
(D1) (E1) Weld bead end points.6. Weld plates together with a bead pattern 200 mm (7.9 in) long between points (D1) and (E1).7. Verify that the

Caterpillar parts catalog:

Caterpillar parts catalog
920 WHEEL LOADER 41J04371-UP (MACHINE)


Parts extension Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.