AVSPARE.COM
parts catalog

SPEEDOMETER GP 5V3391 - Caterpillar



5V3391 SPEEDOMETER GP Caterpillar parts 920 SPEEDOMETER
Rating:
34
Alternative (cross code) number:
CA5V3391
5V-3391
5V3391
Caterpillar 5V3391 SPEEDOMETER GP
Weight: 0.06 pounds 0 kg.

Buy SPEEDOMETER GP 5V3391 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 5V3391:

WHEEL LOADER  920   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Removal Procedure
Start By:
Connect the steering frame lock.
Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Note: Put identification marks on the hose assemblies for installation purposes. Plug the hose assemblies. Plugging the hoses will help to prevent fluid loss and will help to keep contaminants from entering the system.Note: Cleanliness is an important factor. Before the removal procedure, the exterior of the component should be thoroughly cleaned. Cleaning will help to prevent dirt from entering the internal mechanism.Note: The following illustrations have some parts removed for clarity.
Illustration 1 g06297571
Remove plate (1).
Illustration 2 g06297589
Disconnect hose assemblies (2) and hose assembly (3).
Illustration 3 g06297600
Disconnect tube assemblies (4).Note: Some clamps may have to be loosened before valve can be removed.
Illustration 4 g06297617
Disconnect two adapter assemblies (5).Disconnect hose assemblies (6) and hose assembly (7).
Illustration 5 g06297622
Disconnect hose assembly (8) and hose assembly (9).
Illustration 6 g06297626
View from the underside of the machine.
Remove bolts (10).
Illustration 7 g06297638
Disconnect harness assembly (11).Remove bolts (12).Attach appropriate lifting device to main control valve and mounting group (13). Remove main control valve (13). The weight of main control valve and mounting group (13) is approximately 75 kg (165 lb).Installation Procedure
Install main control valve (13) in the reverse order of removal.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
920 WHEEL LOADER 41J04371-UP (MACHINE)


Parts speedometer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.