AVSPARE.COM
parts catalog

SPEEDOMETER A 5V3403 - Caterpillar



5V3403 SPEEDOMETER A Caterpillar parts SPEEDOMETER
Rating:
16
Alternative (cross code) number:
CA5V3403
5V-3403
5V3403
Caterpillar 5V3403 SPEEDOMETER A
Weight: 0.40 pounds 0 kg.

Buy SPEEDOMETER A 5V3403 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g00798929
(A) Boom Nose (B) Stick (C) Fore Boom Cylinder (D) Stick CylinderNote: All bores must be free of paint. Coat all bores for pins with lubricant. (1) Lubricate the sealing lip slightly with the lubricant that is being sealed. (2) Two 148-3089 Sleeve Bearings Outside diameter ... 154.270 0.013 mm (6.0736 0.0005 inch) Inside diameter ... 130.32 + 0.10 - 0.00 mm (5.130 + 0.004 - 0.00 inch) Install the bearing in the bearing bore. ... 9.5 0.8 mm (.37 .03 inch) (3) Torque for bolt ... 530 70 N m (391 52 lb ft) (4) 170-3774 Pin Assembly Diameter after plating ... 109.850 0.040 mm (4.3248 0.0016 inch) Minimum thickness for plating ... 0.005 mm (.0002 inch) Bore diameter for pin ... 110.043 0.043 mm (4.3324 0.0017 inch) (5) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1.6 mm (0.06 inch) Two 4I-0575 Shims ... 1.0 mm (0.04 inch) 4I-0576 Shim ... 1.6 mm (0.06 inch) 4I-0577 Shim ... 2.0 mm (0.08 inch) (6) 106-6838 Pin Assembly Diameter after plating ... 129.85 0.04 mm (5.112 .002 inch) Minimum thickness for plating ... 0.005 mm (.0002 inch) Bore diameter for pin ... 130.05 0.05 mm (5.120 .002 inch) (7) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1.6 mm (0.06 inch) Two 093-0076 Shims ... 1.0 mm (0.04 inch) 093-0108 Shim ... 2.0 mm (0.08 inch) 099-7468 Shim ... 1.5 mm (0.06 inch) (8) Use the necessary shims to adjust the lateral clearance. Maximum clearance ... 1.0 mm (0.04 inch) Two 093-0090 Shims ... 1.0 mm (0.04 inch) 093-0122 Shim ... 2.0 mm (0.08 inch) Three 133-2427 Shims ... 0.5 mm (0.02 inch) (9) Torque for bolt ... 325 40 N m (240 30 lb ft) (10) 130-4360 Pin Assembly Diameter after plating ... 99.850 0.040 mm (3.9311 0.0016 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Bore diameter for pin ... 100.043 0.043 mm (3.9387 0.0017 inch)


Parts speedometer Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.