AVSPARE.COM
parts catalog

FENDER G 5V3404 - Caterpillar



5V3404 FENDER G Caterpillar parts FENDER
Rating:
21
Alternative (cross code) number:
CA5V3404
5V-3404
5V3404
Caterpillar 5V3404 FENDER G
Weight: 1 pounds 0 kg.

Buy FENDER G 5V3404 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g00798342
(1) Bearing Puller Adapter
(2) Sleeve
(3) Rods
(4) Retaining Plate
(5) Washers
(6) Nuts
(7) Nut
(8) Puller Rod
(9) Bearing
(10) Hydraulic Cylinder
Illustration 2 g06352417
Assemble Tooling (B) and (C) according to Illustration 1. Fasten a hoist and a suitable lifting sling to Tooling (B) and (C). The approximate weight of Tooling (B) and (C) is 270 kg (600 lb).
Remove lip seal (17) and (21). Install Tooling (B) and (C) onto link assembly (12). Use Tooling (A), (B), and (C) to remove bearing (19). Repeat the procedure for lip seals (13) and (16) and bearing (15).
Assemble Tooling (B) and (D) according to Illustration 1. Fasten a hoist and a suitable lifting sling to Tooling (B) and (D). The approximate weight of Tooling (B) and (D) is 270 kg (600 lb).
Remove lip seal (20). Install Tooling (B) and (D) onto link assembly (12). Use Tooling (A), (B), and (D) to remove bearing (20). Repeat the procedure for lip seal (11) and bearing (14).Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 3S-6224 Electric Hydraulic Pump 1
6D-7726 Hose As 2
1P-2376 Quick Connect Coupler 2
1P-2377 Dust Plug 2
7J-8611 Elbow 1
3B-7722 Pipe Bushing 2
8T-0820 Hydraulic Pressure Gauge 1
B 5P-5201 Hydraulic Cylinder 1
9U-6800 Nut 2
C 4C-6504 Puller Rod 1
138-1135 Bearing Puller Plate 1
197-6687 Bearing Installer 1
D 4C-8150 Puller Rod 1
197-6687 Bearing Installer 2
Illustration 3 g06352427
Assemble Tooling (B) and (C). Fasten a hoist and a suitable lifting sling to Tooling (B) and (C). The approximate weight of Tooling (B) and (C) is 200 kg (450 lb).
Install Tooling (B) and (C) onto link assembly (2). Use Tooling (A), (B), and (C) to install bearing (9). Install bearing (9) so that dimension (X) is 10 0.5 mm (0.390 0.020 inch). Install bearing (9) so that the angle (Z) of the longitudinal grease groove is 90 5 degrees from the lengthwise axis of the link assembly. Repeat the procedure for lip seals (3) and (6) and bearing (5).
Assemble Tooling (B) and (D). Fasten a hoist and a suitable lifting sling to Tooling (B) and (D). The approximate weight of Tooling (B) and (D) is 200 kg (450 lb).
Install Tooling (B) and (D) onto link assembly (2). Use Tooling (A), (B), and (D) to install bearing (8). Install bearing (8) so that dimension (W) is 10 0.5 mm (0.390 0.020 inch). Install bearing (8) so that the angle (Y) of the longitudinal grease groove is 90 5 degrees from the lengthwise axis of the link assembly. Repeat the procedure for lip seal (1) and bearing (4).


Parts fender Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.