AVSPARE.COM
parts catalog

LIGHTING GP-2 LAMP 5V3729 - Caterpillar



5V3729 LIGHTING GP-2 LAMP Caterpillar parts 814B, 815B, 816B, 950B/950E, 966D LIGHTING
Rating:
16
Alternative (cross code) number:
CA5V3729
5V-3729
5V3729
Caterpillar 5V3729 LIGHTING GP-2 LAMP
Weight: 0.14 pounds 0 kg.

Buy LIGHTING GP-2 LAMP 5V3729 Caterpillar genuine, new aftermarket tractor parts with delivery
LANDFILL COMPACTOR, WHEEL LOADER,

Compatible equipment models: 5V3729:

LANDFILL COMPACTOR  816B  
SOIL COMPACTOR  815B  
WHEEL DOZER  814B  
WHEEL LOADER  950B/950E   966D   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

start by:a) remove flywheel housingb) remove valve liftersc) remove pistonsd) remove timing gear cover and oil pump1. Fasten a hoist and put the engine in position on tool (A).2. Turn the crankshaft until the timing mark on the crankshaft gear is in alignment with the timing mark on the camshaft gear. For more detail about removal of main bearings see REMOVE AND INSTALL CRANKSHAFT MAIN BEARINGS. 3. Remove bolts (1) and main bearing caps (2). Remove the lower halves of the main bearings from the caps.4. Install two of the bolts that hold the flywheel in place in the end of crankshaft. 5. Fasten a hoist and remove crankshaft (3) from the engine. The weight of the crankshaft is 54 kg (120 lb.).
Be careful not to cause damage to the crankshaft journals when the crankshaft is removed.
6. Remove the upper halves of the main bearings from the cylinder block.7. Install tooling (B) and remove the gear from the crankshaft. Install Crankshaft And Gear
1. Install the key for the crankshaft gear so it is even with the end of the crankshaft.2. Heat the crankshaft gear to a maximum temperature of 260°C (500°F). Install the gear on the crankshaft with the timing mark on the gear toward the pulley end of the crankshaft.3. Install the thrust bearing for the No. 4 main. Install the bearings dry when the clearance checks are made. Put clean engine oil on the bearings for final assembly.4. Install the upper main bearings (the bearings with oil hole) into the engine block.5. Install two of the bolts that hold the flywheel in place in the end of the crankshaft. Fasten a hoist and put the crankshaft in position in the block. Make sure the timing mark on the crankshaft gear is in alignment with the timing mark on the camshaft gear. For more detail about installation of main bearings see REMOVE AND INSTALL CRANKSHAFT MAIN BEARINGS.
When the bearing caps are installed, make sure the number on the side of the cap is next to and respective with the number on the engine block.
When the bearing clearance is checked and the engine is in a vertical position, the crankshaft will have to be lifted up with a force equal to the weight of the crankshaft and held against the upper halves of the main bearings to get a correct measurement with Plastigage. The Plastigage will not hold the weight of the crankshaft and give a correct indication. If the engine is in a horizontal position, such as on an engine stand, it is not necessary to hold the crankshaft up. Do not turn crankshaft when Plastigage is in position to check clearance. 6. Check the bearing clearance with Plastigage. Put the lower main bearings into the caps. Put the caps in position and install the bolts. Tighten the bolts in number sequence as follows: a) Tighten bolts 1 through 10 to a torque of 40 4 N m (30 3 lb.ft.).
Do not use an impact

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
815B Soil Compactor 17Z00001-UP (MACHINE) POWERED BY 3306 Engine
966D LOADER 99Y00001-05314 (MACHINE) POWERED BY 3306 ENGINE
814B TRACTOR / POWER SHIFT / 16Z00001-UP (MACHINE) POWERED BY 3306 ENGINE
950B WHEEL LOADER 22Z00001-03188 (MACHINE) POWERED BY 3304 ENGINE
966D WHEEL LOADER 94X00001-06488 (MACHINE) POWERED BY 3306 ENGINE
966E WHEEL LOADER 99Y05315-UP (MACHINE) POWERED BY 3306 ENGINE
950E WHEEL LOADER 22Z03189-UP (MACHINE) POWERED BY 3304 ENGINE


Parts lighting Caterpillar catalog:

2521241 LIGHTING GP-FLOOD
323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L, 345D, 365C, 365C L, 365C L MH, 374D L, 385C, 385C FS, 385C L,...
2824958 LIGHTING GP-FLOOD
324D, 324D LN, 325D, 325D L, 329D LN
2434058 LIGHTING GP-FLOOD
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
3297497 LIGHTING GP-ROADING
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
3297496 LIGHTING GP-ROADING
422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F
2697022 LIGHTING GP-GENERATOR
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, C175-16, C27, C32, PM3516
1860315 LIGHTING GP-ROADING
424D, 428D, 432D, 438D, 442D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.