AVSPARE.COM
parts catalog

SUPPORT AS-RH 5V3817 - Caterpillar



5V3817 SUPPORT AS-RH Caterpillar parts 920, 930 SUPPORT
Rating:
12
Alternative (cross code) number:
CA5V3817
5V-3817
5V3817
Caterpillar 5V3817 SUPPORT AS-RH
Weight: 64 pounds 29 kg.

Buy SUPPORT AS-RH 5V3817 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 5V3817:

WHEEL LOADER  920   930   Caterpillar
Number on catalog scheme: 13
 
  For full view, you need register

Information:


At operating temperature, the hydraulic oil tank is hot and under pressure. Hot oil can cause burns. Remove the fill plug only when the engine is stopped, and the fill plug is cool enough to touch with your bare hand.
1. Release the pressure in the hydraulic system by slowly loosening the fill plug located on the top of the hydraulic oil tank.2. Remove the access cover from under the cab.
View From Under Cab 3. Put identification marks on six hoses (2) that are connect to the pilot control valve (travel) so they can be reinstalled in their original locations. Disconnect the hoses from the valve.4. Remove the rubber floor mate from the cab to gain access to the mounting bolts for the pilot control valve (travel).5. Remove two bolts (3) and the washers that hold the pilot control valve to the floor of the cab. Remove pilot control valve (travel) (1). The following steps are for the installation of the pilot control valve (travel).6. Put pilot control valve (travel) (1) in position in the floor of the cab. Install two bolts (3) and the washers that hold it. Reinstall the rubber floor mate in the cab.7. Connect six hoses (2) to the pilot control valve (travel).8. Reinstall the access cover under the cab.9. Check the oil level in the hydraulic oil tank. Fill the hydraulic oil tank to the correct. See the Operation & maintenance Manual for the correct filling procedure.Disassemble & Assemble Pilot Control Valves (Travel)
Start By:a. remove pilot control valves (travel)
Do not mix the components in the pilot control valve (travel) as it is being disassembled. All components should be reinstalled in their original locations. Put identification marks on all components to prevent mixing.
1. Be sure the outside of the pilot control valve (travel) is thoroughly clean prior to disassembly. Check the condition of all o-ring seals used in the valve. If the seals are worn or damaged, use new parts for replacement. 2. Remove cover (3) from pedal (5). Remove two bolts (4) and the washers. Remove lever assembly (2) from the pilot control valve.3. Remove two bolts (6) and the washers. Remove lever assembly (2) from the pedal. If necessary, remove knob (1) from the lever. 4. Remove bellows (22) from cam (24). Remove shaft (28); then remove cam (24) from cover (26). Remove screws (16) and (23) from cam (24).5. Remove two socket head bolts (25). Remove cover (26) from valve casing (14). Remove bushing (19) and (27) from cover (26).6. Remove plug (29) from the valve casing. Remove o-ring seal (30), scraper (20) and seal (21) from plug (29).7. Remove rod (7), washers (8) and (15), seat (9), springs (10) and (11), washers (12) and (17) and spool (13) from valve casing (14).8. Remove the other valve assembly components as in Steps 6 and 7. The following steps are for the assembly of the pilot control valve (travel).9. Be sure all parts of the pilot control valve (travel) are thoroughly clean and

Caterpillar parts catalog:

Caterpillar parts catalog
920 WHEEL LOADER 41J04371-UP (MACHINE)
930 WHEEL LOADER 79J03733-UP (MACHINE) POWERED BY 3304 ENGINE
920 WHEEL LOADER 41J04371-UP (MACHINE)
930 WHEEL LOADER 79J03733-UP (MACHINE) POWERED BY 3304 ENGINE
920 WHEEL LOADER 75J03573-UP (MACHINE) POWERED BY 3304 ENGINE
930 WHEEL LOADER 73U01313-UP (MACHINE) POWERED BY 3304 ENGINE


Parts support Caterpillar catalog:

2P6539 SUPPORT ASSEM.
12F, 140, 814, 815, 816, 920, 930, 966C, 977K, 977L, D4D, D4E, D6C, D6D
2P6089 SUPPORT ASSEM.
920, 941, 951B, 977K, D4D
6K6073 SUPPORT ASSEM.
926, 926A, 930, 930R, IT28
6K6074 SUPPORT ASSEM. (Front)
926, 926A, 930, 930R, IT28
9V8458 SUPPORT AS.
916, 926, 936, 936F, G936, IT28, IT28B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.