AVSPARE.COM
parts catalog

HOSE AS 5V3844 - Caterpillar



5V3844 HOSE AS Caterpillar parts 611, 615, 615C HOSE
Rating:
49
Alternative (cross code) number:
CA5V3844
5V-3844
5V3844
Caterpillar 5V3844 HOSE AS
Weight: 0.20 pounds 0 kg.

Buy HOSE AS 5V3844 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SCRAPER, WHEEL TRACTOR,

Compatible equipment models: 5V3844:

WHEEL SCRAPER  615C  
WHEEL TRACTOR  611   615   Caterpillar
Number on catalog scheme: 10
 
  For full view, you need register

Information:

(1) Torque for four bolts that hold the bearing caps to the differential carrier ... 1100 100 N m (820 75 lb ft)(2) Torque for 36 bolts that hold the bevel gear to the differential case (with 2P-2506 Lubricant on washer faces and bolt threads and tightened by hand) ... 440 14 N m (320 10 lb ft)(3) Torque for 12 bolts that fasten cage (9) to the carrier ... 135 20 N m (100 15 lb ft)(13) 7D-4893 Spring: Length under test force ... 68.3 mm (2.69 in)Test force ... 426 22 N (95.7 4.8 lb)Free length after test ... 75.7 mm (2.98 in)Outside diameter ... 23.80 mm (.937 in)Adjustment Of Pinion Bearing Preload And Backlash
1. Install the bearings on pinion (4) and install pinion (4) in the carrier.2. Use shims (12) as needed behind cage (9) to put enough preload on the pinion bearings so the torque needed to turn pinion (4) is ... 2.2 0.6 N m (20 5 lb in) Do not install seal (10) in cage (9) until after the adjustment is made. Turn the pinion slowly while the adjustment is made.3. Install the differential assembly in the carrier.4. Install the bearing caps and bolts. At this time, do not tighten the bolts to full torque.5. Put the carrier in a position so the centerline for the axles is vertical and the bevel gear teeth are toward the top.6. Use a dial indicator to measure the backlash between bevel gear (11) and pinion (4) at four points on the bevel gear. Find the average backlash. Turn adjustment ring (6) until the average backlash is ... 0.36 0.13 mm (.014 .005 in)7. Use a dial indicator to measure the amount of change in dimension (B). Turn adjustment ring (14) to get the maximum preload on carrier bearings, until dimension (B) has an increase of ... 0.18 0.05 mm (.007 .002 in)8. After the adjustments have been made, tighten bolts (1) to a torque of ... 1100 100 N m (820 75 lb ft)Adjustment Of Differential Thrust Stops
To get the correct preload (A) between pin (8) and bearing cap (15) of the carrier assembly, use the procedure that follows:1. Install the differential carrier into the axle housing.2. Install pin (8) and the cover. Do not install shims (16) at this time.3. Tighten bolt (7) evenly until pin (8) is against bearing cap (15) of the carrier assembly. Use a feeler gauge to measure the distance between the cover and the axle housing.4. Make a thickness of shims the same as the distance measured minus 0.05 0.03 mm (.002 .001 in). Install shims (16) between the cover and the axle housing.

Caterpillar parts catalog:

Caterpillar parts catalog
615C Wheel Tractor-Scraper 2XG00001-UP (MACHINE) POWERED BY 3306 Engine
615C Series II Wheel Tractor-Scraper 2XG00898-UP (MACHINE) POWERED BY 3306 Engine
611 Wheel Tractor Scraper 6SZ00001-UP (MACHINE) POWERED BY 3306 Engine


Parts hose Caterpillar catalog:

5P0767 HOSE
1090, 1190, 1190T, 120G, 1290T, 1390, 140G, 215, 215B, 215C, 215D, 225, 225D, 227, 229, 2290, 229D, 231D, 235, 235B, 235C, 235D, 236D, 2384C, 2390, 2391, 242D, 245, 245B, 245D, 246D, 2470C, 2484C, 249...
1316645 HOSE
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 160H ES, 160H NA, 163H, 163H NA, 1673C, 16H, 16M, 215B, 235B, 235D, 3176C, 3196, 330, 330 L...
5P1420 HOSE
120M, 12M, 216, 216B, 216B3, 226B, 226B3, 228, 2290, 232B, 235C, 236, 236B, 236B3, 236D, 2384C, 2390, 2391, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 2484C, 2491, 252B, 252B3, 256C, 257B, ...
5P1505 HOSE
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 216B, 216B3, 226B, 226B3, 232B, 2384C, 242B, 247B, 247B3, 2484C, 257B, 2864C, 307B, 311, 3116, 311B, 312, 3126, 312B, 3...
4N4937 HOSE AS
14G, 1673C, 16G, 3208, 3306, 3306C, 3406, 518, 611, 615C, 621B, 627B, 936, 980C
1465762 HOSE AS
24M, 611, 950G, 962G, M318D MH, M322D, M322D MH, RM-350B
9K8141 HOSE AS
518, 528, 528B, 530B, 613B, 613C, 613C II, 615C, 920, 930, 930R, FB518
7T0626 HOSE AS
611, 615C, 992D, D8L, D9N
5T9686 HOSE AS
140M, 14G, 14H, 14H NA, 160M, 16H, 16H NA, 16M, 615C, 924G, 924H, 924K, 928HZ, 930G, 930K, 938K, 990H, 992K, D11R
9D5404 HOSE AS
611, 613C II, 615C, 623B
1490196 HOSE AS
611, 615C, 770, 772, 776D, 777D, 784C, 785C, 789C, 793C, 980G II, 980H, AP-800C, BG-225B
2T1760 HOSE AS
613C II, 615C, PS-360C
2T2524 HOSE AS
615C, AP-600D, AP-655D, BG600D, BG655D
2T1765 HOSE AS
615C, CB-44B, CB-54B
2T1657 HOSE AS
611, 615, 615C
2T1664 HOSE AS
611, 615, 615C
2T1665 HOSE AS
611, 615, 615C
2T1663 HOSE AS
611, 615, 615C
2T1660 HOSE AS
611, 615, 615C, 854G, 992G
2T1658 HOSE AS
611, 615, 615C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.