AVSPARE.COM
parts catalog

COUPLER AR-WIDE FRAME 9V8944 - Caterpillar



9V8944 COUPLER AR-WIDE FRAME Caterpillar parts IT18 COUPLER
Rating:
61
Alternative (cross code) number:
CA9V8944
9V-8944
9V8944
Caterpillar 9V8944 COUPLER AR-WIDE FRAME

Buy COUPLER AR-WIDE FRAME 9V8944 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER,

Compatible equipment models: 9V8944:

INTEGRATED TOOLCARRIER  IT18   Caterpillar
  For full view, you need register

Information:

Rubber Damper
Your engine may be equipped with a rubber damper. The rubber damper uses a ring which is mounted in rubber in order to reduce vibrations in the crankshaft. Inspect the damper and repair or replace the damper for any of the following reasons:
There is deterioration and cracking of the rubber.
There is slippage of the outer ring from the original position.
The engine has had a failure because of a broken crankshaft.
Analysis of the oil has revealed that the front main bearing is badly worn.
There is a large amount of gear train wear that is not caused by lack of oil.Refer to the Service Manual or consult your Caterpillar dealer for information about damper replacement.Visconic Damper
Your engine may be equipped with a visconic damper. The visconic damper has a weight that is located inside a fluid filled case. The weight moves in the case in order to limit torsional vibration.Inspect the damper for evidence of fluid leaks. If a fluid leak is found, determine the type of fluid. The fluid in the damper is silicone. Silicone has the following characteristics: transparent, viscous, smooth and difficult to remove from surfaces.If the fluid leak is oil, inspect the crankshaft seals for leaks. If a leak is observed, replace the crankshaft seals.Inspect the damper and repair or replace the damper for any of the following reasons:
The damper is dented, cracked, or leaking.
The paint on the damper is discolored from heat.
The engine has had a failure because of a broken crankshaft.
Analysis of the oil has revealed that the front main bearing is badly worn.
There is a large amount of gear train wear that is not caused by a lack of oil.Refer to the Service Manual or consult your Caterpillar dealer for information about damper replacement.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts coupler Caterpillar catalog:

1957764 COUPLER GP-QUICK
966G, 966G II, 966H, 972G, 972G II, 972H, SW2003/6, SW2109
3887402 COUPLER AR-QUICK
966M, 966M XE, 972M, 972M XE
2825536 COUPLER AR-QUICK
311D LRR, 312D, 312D L, 314D CR, 314D LCR
3912753 COUPLER GP-QUICK
330D L, 330D LN, 336D L, 336D LN, 336E LN, CW-10
3932682 COUPLER AR-QUICK
966M, 966M XE, 972M, 972M XE
3888300 COUPLER AR-QUICK
236D, 242D, 257D, 259D
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.