AVSPARE.COM
parts catalog

COVER 9V8971 - Caterpillar



9V8971 COVER Caterpillar parts 916, 936, 950F, 966F, IT18B, IT28 COVER
Rating:
27
Alternative (cross code) number:
CA9V8971
9V-8971
9V8971
Caterpillar 9V8971 COVER
Weight: 0.04 pounds 0 kg.

Buy COVER 9V8971 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER, WHEEL LOADER,

Compatible models Caterpillar: 9V8971:

INTEGRATED TOOLCARRIER  IT18B   IT28  
WHEEL LOADER  916   936   950F   966F   Caterpillar
Number on catalog scheme: 25
 
  For full view, you need register

Information:

Start By:a. engage parking brakeb. place transmission in neutralc. remove crankcase guard groupd. remove fender group 1. Place wooden blocks to the trailer tires. 2. Place steering assembly lock (2) on each steering cylinder (1). 3. Remove four bolts (3). Set aside the right hand deck plate (4). The following steps must be performed to fully extend the front suspension cylinders. Full extension of the front suspension is required in the removal of the front axle. 4. Disconnect electrical quick connection (5). Observe all safety precautions and start the engine.5. Use the handle assembly stored in the cab of the truck to RAISE the front suspension. Pull lever assembly (6) UP. Extending the front suspension cylinders can only be completed by performing Steps #4 & 5. 6. Turn the engine OFF. Observe front suspension cylinders (7) to verify that they are fully extended. Disconnect breather line (8) from front axle (9). 7. Use tool (A) to raise both tractor tires (10) off the floor. Place tool (B) to the frame as an additional safety measure. 8. Location of tool (A). 9. Locate tool (C) at rear of front frame. 10. Remove twenty nuts (11) on front lines. 11. Typical removal of tire from vehicle.12. Repeat Step #10 and 11 to remove the second tire from the front axle. 13. Remove four bolts (13). Set aside brake guard (12). 14. Disconnect brake line (14). Plug or cap immediately. Catch brake fluid in a suitable container. 15. Disconnect grease line (17). Remove six bolts (15). Set aside left side cradle bearing cap (16). When remove the cradle bearing cap, four shims (18) will be removed with it. 16. Disconnect grease line (20) from each front suspension cylinder (7). Put straps (19) on grease lines and reposition grease lines. 17. Disconnect grease line (21). Remove nut (23) and reposition the rod assembly (22). 18. Remove four bolts (25) and set aside the lever (26). Remove two bolts (24). Set aside right side cradle bearing cap (27). When removing cradle bearing cap, four shims (28) will be removed with it. 19. Remove four bolts (29) from front driveshaft (31) and front axle differential group (30).
Photographic purposes only Photo shows front differential group (30). 20. Remove bolt (32) from each front suspension cylinder (7). 21. With an overhead hoist, place tool (D) to the front axle. Place tool (E) to the frame assembly of the front axle. 22. Use a suitable lift truck on other end of the front axle. 23. Remove tapered pin (33) from each front suspension cylinder (7). 24. Remove two bolts (35) and frame assembly cap (34).25. Repeat Step #24 for other end of front axle. 26. With overhead hoist, lift truck and tool (D) gradually lower front axle (9) onto tool (F). The front axle is 948 kg (2100 lb). 27. Secure front axle (9) to the lift truck with tool (G).28. Remove front axle (9) from under the tractor and to an appropriate work area. 29.

Caterpillar parts catalog:

Caterpillar parts catalog
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE
IT28B INTEGRATED TOOLCARRIER 5SD00001-UP (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 4NB02076-UP (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 9WB00001-UP (MACHINE) POWERED BY 3204 ENGINE
1T18 INTEGRATED TOOLCARRIER 7ZB00001-UP (MACHINE) POWERED BY 3204 ENGINE
916 WHEEL LOADER 9WB00001-UP (MACHINE) POWERED BY 3204 ENGINE
1T18 INTEGRATED TOOLCARRIER 7ZB00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT18B INTEGRATED TOOLCARRIER 1DF00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT28 INTEGRATED TOOLCARRIER 8JB00001-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE
IT28B INTEGRATED TOOLCARRIER 5SD00001-UP (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 4NB02076-UP (MACHINE) POWERED BY 3204 ENGINE
IT18B INTEGRATED TOOLCARRIER 1DF00001-UP (MACHINE) POWERED BY 3204 ENGINE
950F Wheel Loader 6YG00001-UP (MACHINE) POWERED BY 3116 Engine
966F WHEEL LOADER 3XJ00001-UP (MACHINE) POWERED BY 3306 Engine
936 WHEEL LOADER 45Z00001-03056 (MACHINE) POWERED BY 3304 ENGINE
916 WHEEL LOADER 9WB00001-UP (MACHINE) POWERED BY 3204 ENGINE
1T18 INTEGRATED TOOLCARRIER 7ZB00001-UP (MACHINE) POWERED BY 3204 ENGINE
936 WHEEL LOADER 45Z00001-03056 (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGINE
916 WHEEL LOADER 9WB00001-UP (MACHINE) POWERED BY 3204 ENGINE
1T18 INTEGRATED TOOLCARRIER 7ZB00001-UP (MACHINE) POWERED BY 3204 ENGINE
IT18B INTEGRATED TOOLCARRIER 1DF00001-UP (MACHINE) POWERED BY 3204 ENGINE


Parts cover Caterpillar catalog:

9V8463 COVER
916, 926, 926A, 936, G936, IT28
8V1626 COVER
814B, 814F, 815F, 816F, 916, 926, 926A, 936, 936F, 950B, 950B/950E, 966D, 966F, 966F II, 970F, CS-643, G926, G936, IT18, IT18B, IT28, IT28B
8V8817 COVER
936, 936F, CS-643, G936
8V8424 COVER
936, 936F, CS-643, G936
5V6180 COVER AS
508, 518, 936, D250B, D250E, D300B, D300D, G936
4V0828 COVER
815B, 816B, 834B, 916, 936, 950, 950B, 950F, 966D, 966F, 980C, 980F, 988B, 992C, CS-643, G936, IT28, R1700 II, R2900
9V8465 COVER
916, 926, 936, 936F, G936
8V4448 COVER
936, CS-643, G936, IT28
9V9231 COVER AS
936, CS-643, G936, IT28
8V2190 COVER AS
926, 936, 936F, CS-643, G936, IT28, IT28B
8V2193 COVER
936, CS-643, G936, IT28
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.