AVSPARE.COM
parts catalog

PLATE A 9V8995 - Caterpillar



9V8995 PLATE A Caterpillar parts PLATE
Rating:
26
Alternative (cross code) number:
CA9V8995
9V-8995
9V8995
Caterpillar 9V8995 PLATE A
Weight: 0.74 pounds 0 kg.

Buy PLATE A 9V8995 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Typical Example1. Disconnect the tie rods from arm (1). See Remove And Install Tie Rods.2. The weight of arm (1) is 95 kg (209 lb.). Put tool (A) in position as shown.3. Remove two bolts (3), lock (2) and pin (4). Remove arm (1) from the machine.
Typical Example4. Use tooling (B) as shown, and remove bearing (6). Turn tooling (B) upside down, and remove bearing (5).Install Steering Arm
Typical Example1. Lower the temperature of the upper bearing. Install the upper bearing with tooling (B) as shown until it is even with surface (7).2. Lower the temperature of the lower bearing. Turn tooling (B) upside down, and install the lower bearing until it is even with surface (8).
Typical Example3. Put arm (1) in position with tool (A) as shown.4. Align slot (9) in pin (4) with lock (2). Install pin (4), lock (2) and the bolts that hold them.5. Connect the tie rods to the steering arm. See Remove And Install Tie Rods.


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.