AVSPARE.COM
parts catalog

WHEEL 9V9008 - Caterpillar



9V9008 WHEEL Caterpillar parts 950B, 950B/950E WHEEL
Rating:
86
Alternative (cross code) number:
CA9V9008
9V-9008
9V9008
Caterpillar 9V9008 WHEEL
Weight: 161 pounds 73 kg.

Buy WHEEL 9V9008 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9008:

WHEEL LOADER  950B   950B/950E   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 1 g02901576
Place a suitable container under the drain hose. Open the drain valve (1).
Drain the engine oil completely.
Close the drain valve.
Remove filter element (2). Discard the used filter element.
Clean the filter housing base. All of the old filter seal must be removed from the filter housing base.
Apply a thin coat of engine oil to the seal of the new filter element. Note: There are rotation index marks on each engine oil filter that are spaced 90 degrees or 1/4 turn away from each other. When you tighten oil filters, use the rotation index marks as a guide.
Install the engine oil filter hand tight until the seals of the engine oil filter contacts the base. Note the position of the index marks on the filter in relation to a fixed point on the filter base.
Tighten the filter according to the instructions that are printed on the filter. Use the index marks as a guide.
Illustration 2 g02901579
Remove oil fill cap (3). Fill the crankcase with new oil. See Operation and Maintenance Manual, "Capacities (Refill)". Clean the oil filler cap and install the oil filler cap.
Illustration 3 g02448697
Before you start the engine, check the oil level on oil level gauge (4). The oil level must be between the "L" mark and the "H" mark on the oil level gauge.
Start the engine. Run the engine for two minutes. Inspect the machine for leaks. Stop the machine.
Wait for ten minutes in order to allow the oil to drain back into the crankcase. Check the oil level. Maintain the oil level between the "L" mark and the "H" mark on the oil level gauge.
Close the engine compartment.

Caterpillar parts catalog:

Caterpillar parts catalog
950B WHEEL LOADER 22Z00001-03188 (MACHINE) POWERED BY 3304 ENGINE
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE
950B WHEEL LOADER 22Z00001-03188 (MACHINE) POWERED BY 3304 ENGINE
950E WHEEL LOADER 22Z03189-UP (MACHINE) POWERED BY 3304 ENGINE
950B WHEEL LOADER 22Z00001-03188 (MACHINE) POWERED BY 3304 ENGINE
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE
950E WHEEL LOADER 22Z03189-UP (MACHINE) POWERED BY 3304 ENGINE
950B WHEEL LOADER 65R02824-03088 (MACHINE)
950E WHEEL LOADER 65R03089-UP (MACHINE) POWERED BY 3304 ENGINE


Parts wheel Caterpillar catalog:

4V8532 WHEEL AS
613C, 950B, 950B/950E
8R4087 WHEEL
528, 613C, 613C II, 613G, 950B, 950B/950E, D300E, R1300, R1300G, R1300G II
8V6391 WHEEL
814B, 966D, D25C, D30C, D350C, D35C, D35HP, D400
1035961 WHEEL
815B, 816B, 966F
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.