AVSPARE.COM
parts catalog

PLATE AS-RH 9V9036 - Caterpillar



9V9036 PLATE AS-RH Caterpillar parts PLATE
Rating:
21
Alternative (cross code) number:
CA9V9036
9V-9036
9V9036
Caterpillar 9V9036 PLATE AS-RH
Weight: 36 pounds 16 kg.

Buy PLATE AS-RH 9V9036 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

7. Connect hose assembly (1) to the brake assembly.8. Put the O-ring seal in place in tube assembly (2), and connect the tube assembly to the brake assembly.9. Fill the brake system with oil to the correct level. See the Maintenance Guide.10. After installation of the rear wheel bearings and Duo-Cone Seals, bleed the air from the brake system. See Testing And Adjusting for the correct procedure to bleed the brakes.End By:a. install rear wheel bearings and Duo-Cone seals **This operation is in the 789 Truck Power Train, Disassembly And Assembly Manual.Disassemble Rear Service And Parking Brakes
Start By:a. remove rear service and parking brakes 1. Put the brake assembly on blocks with the anchor up as shown.2. Remove bolts (1) and the washers that hold the anchor in place.3. Loosen nuts (2) one half to one turn at a time to release the compression spring tension. 4. Fasten a hoist and tooling (A) to anchor (3), and remove the anchor from the brake assembly. The weight of the anchor is 403 kg (888 lb.).5. Remove nuts (2)


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.