AVSPARE.COM
parts catalog

HINGE AS 9V9099 - Caterpillar



9V9099 HINGE AS Caterpillar parts 936, 936F, 938G, G936 HINGE
Rating:
27
Alternative (cross code) number:
CA9V9099
9V-9099
9V9099
Caterpillar 9V9099 HINGE AS
Weight: 20 pounds 9 kg.

Buy HINGE AS 9V9099 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible models Caterpillar: 9V9099:

WHEEL LOADER  936   936F   938G   G936   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:


Illustration 1 g06024074
Table 1
Item Qty Part Specification Description
Install the rod and piston group in the engine with the part number of the forging for the rod assembly to the rear of the engine. The rear of the engine is the flywheel end of the engine. Lubricate the rod and piston group with clean engine oil before you insert the rod and piston group into the block.
1 1 347-2380 Piston Ring Install the top piston ring with the side marked "UP-1" toward top of the piston. The black colored stripe faces to the right of the ring end gap.
When the new top piston ring is installed in a cylinder liner bore with bore size of 112.025 0.025 mm (4.4104 0.0010 inch), the clearance between the ends of the piston ring is 0.40 0.10 mm (0.016 0.004 inch).
Thickness is 3.5 mm (0.14 inch).
2 1 347-2381 Piston Ring Install the intermediate piston ring with the side marked "UP-2" toward top of the piston. The purple colored stripe faces to the right of the piston ring end gap.
When the new top piston ring is installed in a cylinder liner bore with bore size of 112.025 0.025 mm (4.4104 0.0010 inch), the clearance between the ends of the piston ring is 1.20 0.12 mm (0.047 0.005 inch).
Width of groove in 385-1657 Piston Crown As for intermediate piston ring is 3.060 0.010 mm (0.1205 0.0004 inch).
Thickness is 3.000 0.010 mm (0.1181 0.0004 inch).
3 1 347-2382 Piston Ring The oil control piston ring has a spring that is installed with the ring. The gap in the spring should be a distance of 180 degrees from the ring end gap when the oil control piston ring is assembled. The blue colored stripe faces to the right of the ring end gap.
When the new top piston ring is installed in a cylinder liner bore with bore size of 112.025 0.025 mm (4.4104 0.0010 inch), the clearance between the ends of the piston ring is 0.45 0.15 mm (0.018 0.006 inch).
Width of groove in 385-1657 Piston Crown As for intermediate piston ring is 4.030 0.010 mm (0.1587 0.0004 inch).
Thickness is 3.975 0.015 mm (0.1565 0.0006 inch).
After the piston rings have been installed, rotate the piston rings so that the end gaps are 120 degrees from each other.
Thoroughly lubricate the entire piston in zone (A) prior to assembly into the cylinder block with clean engine oil.
4 1 524-5611 Piston Pin Thoroughly lubricate the piston pin with clean engine oil prior to assembly.
Outside diameter of the piston pin is 46.000 0.005 mm (1.8110 0.0002 inch).
Inside diameter of the piston pin is 20.6 0.3 mm (0.81 0.01 inch).
Length of the piston pin is 91.50 0.20 mm (3.602 0.008 inch).

Caterpillar parts catalog:

Caterpillar parts catalog
938G Wheel Loader 4YS00001-UP (MACHINE) POWERED BY 3126 Engine
936 WHEEL LOADER 33Z00001-03090 (MACHINE) POWERED BY 3304 ENGINE
G936 WHEEL LOADER 3HD00001-UP (MACHINE) POWERED BY 3304 ENGINE
936 WHEEL LOADER 33Z00001-03090 (MACHINE) POWERED BY 3304 ENGINE
G936 WHEEL LOADER 3HD00001-UP (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 33Z03091-UP (MACHINE) POWERED BY 3304 ENGINE
G936 WHEEL LOADER 3HD00001-UP (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 33Z03091-UP (MACHINE) POWERED BY 3304 ENGINE
936 WHEEL LOADER 33Z00001-03090 (MACHINE) POWERED BY 3304 ENGINE
G936 WHEEL LOADER 3HD00001-UP (MACHINE) POWERED BY 3304 ENGINE
936 WHEEL LOADER 45Z00001-03056 (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGINE
936 WHEEL LOADER 33Z00001-03090 (MACHINE) POWERED BY 3304 ENGINE
G936 WHEEL LOADER 3HD00001-UP (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 33Z03091-UP (MACHINE) POWERED BY 3304 ENGINE
G936 WHEEL LOADER 3HD00001-UP (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 33Z03091-UP (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGINE
936 WHEEL LOADER 45Z00001-03056 (MACHINE) POWERED BY 3304 ENGINE
936E WHEEL LOADER 45Z03057-UP (MACHINE) POWERED BY 3304 ENGINE


Parts hinge Caterpillar catalog:

8V2178 HINGE
926, 936, 936F, G936, IT28
8V8751 HINGE
936, CS-643, IT28
1071161 HINGE
554, 564, 574B, 824G, 824G II, 824H, 825G, 825G II, 825H, 950G, 962G, 966G, 966G II, 966H, 972G, 980G, IT62G
1111316 HINGE
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 950G II, 950H, 962G, 962G II, 962H, 966G, 966G II, 966H, 972G, 972G II, 972H, 980G, 980G II, 980H, 986H, 98...
1166509 HINGE AS
725, 730, 824G, 825G, 826G, 938G, 938G II, 950G, 950G II, 962G, 962G II, 966G, 966G II, 972G, 972G II, 980G, 980G II, CS-531D, CS-533D, CS-563D, CS-573D, CS-583D, IT38G, IT38G II, IT62G, IT62G II
2485076 HINGE AS
631E, 631G, 633E II, 637E, 637G
1200168 HINGE AS
928G, 928HZ, IT28G
1555047 HINGE AS
938G, 938G II, 938H
9V1170 HINGE AS
936, 936F, 938G, G936
9V1169 HINGE AS
936, 936F, 938G, G936
9V9098 HINGE AS
936, 936F, 938G, G936
9V9096 HINGE AS
936, 936F, 938G, G936
9V9097 HINGE AS
936, 936F, 938G, G936
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.