AVSPARE.COM
parts catalog

BRACKET AS 9V9111 - Caterpillar



9V9111 BRACKET AS Caterpillar parts 926, 926A BRACKET
Rating:
13
Alternative (cross code) number:
CA9V9111
9V-9111
9V9111
Caterpillar 9V9111 BRACKET AS
Weight: 3 pounds 1 kg.

Buy BRACKET AS 9V9111 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9111:

WHEEL LOADER  926   926A   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:

Start By:a. remove transmission hydraulic control linkage 1. Remove bolt (2) and the washer from the hydraulic control valve.2. Move sleeves (1) away from the hydraulic control valve. 3. Remove bolt (3) and the washer from the hydraulic control valve.4. Move sleeves (4) away from the hydraulic control valve. 5. Fasten tool (A) and a hoist to transmission hydraulic control valve (5) as shown.6. Remove bolts (6), (7), (8) and remove transmission hydraulic control valve (5). The weight of the valve is 32 kg (70 lb). 7. Remove sleeves (9) and (11) from the housing.8. If necessary remove O-ring seals (10) from the sleeves.Install Transmission Hydraulic Control Valve
1. If necessary make a replacement of O-ring seals (1).2. Put clean transmission oil on O-ring seals (1) and install sleeves (2) in the housing. 3. Fasten tool (A) and a hoist on transmission hydraulic control valve (3) as shown.4. Put transmission hydraulic control valve (3) in position in the housing as shown. 5. Install bolts (4) that hold the control valve and tighten them to a torque of 48 4 N m (35 3 lb ft).6. Move sleeves (5) into the control valve and install the washer and bolt (6) that hold them. 7. Move sleeves (7) into the control valve and install the washer and bolt (8) that hold them.End By:a. install transmission hydraulic control linkageDisassemble Transmission Hydraulic Control Valve
Start By:a. remove transmission hydraulic control valve 1. Remove directional and speed control valves (3) from the valve body.2. Remove bolts (1) and cover (2) from the valve body. 3. Make a separation of valve body (4) from manifold valve group (5). 4. Remove the bolts and cover (6) from the valve body.5. Remove the O-ring seals from cover (6). 6. Remove piston (10), spacers (shims) (9), springs (8), (12) and (13) and valve spools (7) and (11) from the valve body.
Retainer (16) and ring (17) have spring pressure on them. To prevent possible personal injury carefully remove ring (17).
7. Remove ring (17), retainer (16) and springs (14) and (15) from valve spool (7). 8. Remove slug (18) from valve spool (11). 9. Use tool (A) to remove ring (22). Remove retainer (21), spring (20) and ball (19) from valve spool (11). 10. Remove dowels (23) and (24) from the valve body.11. Remove valve spool (25), the spring and stop from the valve body. 12. Remove dowel (26) and stop (27) from the valve body. 13. Remove screen (28) from the valve body. 14. Remove plate (29) from manifold valve group (5). 15. Remove the bolts on cover (30) from the manifold valve group.16. Remove the O-ring seal from cover (30). 17. Remove guide (33), spring (32) and valve spool (31) from the manifold valve group.18. If necessary remove the ring and plug from valve spool (31). 19. Remove dowel (34) from the manifold valve group.Assemble Transmission Hydraulic Control Valve
1. Install dowel (34) in the manifold valve group 1.5 .05 mm (.06 .02 in) below the

Caterpillar parts catalog:

Caterpillar parts catalog
926 WHEEL LOADER 94Z00001-02208 (MACHINE) POWERED BY 3204 ENGINE
G926 WHEEL LOADER 1SD00001-00073 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 94Z02209-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 4NB00001-02075 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 4NB02076-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 8NB00001-01541 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 8NB01542-02451 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 8NB02452-UP (MACHINE) POWERED BY 3204 ENGINE
926 WHEEL LOADER 94Z00001-02208 (MACHINE) POWERED BY 3204 ENGINE
G926 WHEEL LOADER 1SD00001-00073 (MACHINE) POWERED BY 3204 ENGINE
926E WHEEL LOADER 94Z02209-UP (MACHINE) POWERED BY 3204 ENGINE


Parts bracket Caterpillar catalog:

9V9110 BRACKET AS
926, 926A, IT28, IT28B
9V9108 BRACKET AS
926, 926A, IT28, IT28B
8V7633 BRACKET AS
926, 926A, IT28, IT28B
8V7601 BRACKET
926, 926A, G926
2W1118 BRACKET AS
508, 518, 518C, 528, 528B, 530B, 916, 926, 936, 936F, CS-643, G936, IT28
9V6613 BRACKET AS
936, 936F, G936
9V5468 BRACKET
926, 926A, G926
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.