AVSPARE.COM
parts catalog

TUBE AS 9V9130 - Caterpillar



9V9130 TUBE AS Caterpillar parts 824C, 826C TUBE
Rating:
37
Alternative (cross code) number:
CA9V9130
9V-9130
9V9130
Caterpillar 9V9130 TUBE AS
Weight: 0.90 pounds 0 kg.

Buy TUBE AS 9V9130 Caterpillar genuine, new aftermarket tractor parts with delivery
LANDFILL COMPACTOR, WHEEL DOZER,

Compatible models Caterpillar: 9V9130:

LANDFILL COMPACTOR  826C  
WHEEL DOZER  824C   Caterpillar
Number on catalog scheme: 30
 
  For full view, you need register

Information:


Illustration 1 g01463731
Schematic of the Transmission Shift Assembly
Illustration 2 g01463737
Schematic of the Transmission Downshift Switch(Part of the Transmission Shift Assembly Schematic)This diagnostic code is associated with the Transmission Downshift Switch. The Transmission Downshift Switch is part of the Transmission Shift Assembly. The Transmission Downshift Switch is connected to two inputs of the ECM. One contact is open and the other contact is grounded during proper operation.This FMI 04 means that the ECM has determined that both circuits have been grounded for at least 1 minute.Note: The following test procedure may create other diagnostic codes. Ignore these diagnostic codes and clear these diagnostic codes when the original diagnostic code has been corrected.Ensure that the diagnostic code of CID 0621 FMI 04 is active before performing this procedure.
Table 1
Downshift Switch    
Switch Position    G762-BR Circuit
N/O J1-43    G761-YL Circuit
N/C J1-42    
Depressed     Closed     Open    
Released     Open     Closed    Test Step 1. CHECK THE OPERATION OF THE SWITCH IN THE RELEASED POSITION
Turn the key start switch and the disconnect switch to the OFF position.
Disconnect the machine harness connector from the switch harness assembly.
Connect one lead from a multimeter to contact 2 (wire 202-BK) of the switch harness assembly.
Connect the other lead from a multimeter to contact 7 (wire G761-YL) of the switch harness assembly.
Measure the resistance between contact 2 and contact 7. Note the resistance.
Disconnect the lead from contact 7 and connect the lead to contact 8 (wire G762-BR).
Measure the resistance between contact 2 and contact 8. Note the resistance.Expected Result:The resistance from contact 2 to contact 7 is less than 5 ohms, and the resistance from contact 2 to contact 8 is greater than 5000 ohms.Results:
YES - The resistance from contact 2 to contact 7 is less than 5 ohms, and the resistance from contact 2 to contact 8 is greater than 5000 ohms. The switch is operating correctly in the released position. Proceed to Test Step 2.
NO - The resistance is not correct. The switch has failed.Repair: Replace the switch.STOPTest Step 2. CHECK THE OPERATION OF THE SWITCH IN THE DEPRESSED POSITION
Depress the switch. Hold the switch in the depressed position.
The machine harness remains disconnected from the switch harness assembly.
Connect one lead from a multimeter to contact 2 (wire 202-BK) of the switch harness assembly.
Connect the other lead from a multimeter to contact 7 (wire G761-YL) of the switch harness assembly.
Measure the resistance between contact 2 and contact 7. Note the resistance.
Disconnect the lead from contact 7 and connect the lead to contact 8 (wire G762-BR).
Measure the resistance between contact 2 and contact 8. Note the resistance.Expected Result:The resistance from contact 2 to contact 7 is greater than 5000 ohms, and the resistance from contact 2 to contact 8 is less than 5 ohms.Results:
YES - The resistance from contact 2 to contact 7 is greater than 5000 ohms, and the resistance from contact 2 to contact 8 is less than 5 ohms. The switch is operating correctly in the depressed position. Proceed to Test Step

Caterpillar parts catalog:

Caterpillar parts catalog
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE
825C COMPACTOR 86X00731-UP (MACHINE) POWERED BY 3406 ENGINE
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE
825C COMPACTOR 86X00731-UP (MACHINE) POWERED BY 3406 ENGINE
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE
825C COMPACTOR 86X00731-UP (MACHINE) POWERED BY 3406 ENGINE
826C Landfill Compactor 87X00587-UP (MACHINE)


Parts tube Caterpillar catalog:

7X2049 TUBE AS-REFRIGERANT ORIFICE
120H, 120H ES, 120H NA, 12H, 12H ES, 12H NA, 135H, 135H NA, 140H, 140H ES, 140H NA, 143H, 14H, 14H NA, 160H, 160H ES, 160H NA, 163H, 163H NA, 16H, 307B, 317B LN, 318B, 322B L, 325B L, 330B L, 345B, 34...
1152359 TUBE AS
3406B, 3406C, 3406E, 3456, 770, 770G, 770G OEM, 824C, 824G, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 980G, 980G II, 980H, 986H, AD55, C-15, C-16, C-18, C15, C16, C18, CX31-C15I, ...
2773076 TUBE AS-OIL JET
3406B, 3406C, 3406E, 3456, 375, 375 L, 385B, 5080, 5090B, 578, 583R, 621G, 623G, 627F, 627G, 651B, 657B, 735, 740, 824C, 824G, 824G II, 825G, 825G II, 826C, 826G, 826G II, 834G, 836G, 980C, 980G, 980G...
4S8603 TUBE AS-SCREEN
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
2W2927 TUBE AS
3406B, 3406C, 578, 824C, 826C, 980C, 980F, 980F II, D8N, HT400, PM-465, RM-250C, RM-350B, RR-250, RR-250B, SM-350, SS-250
2764637 TUBE AS-OIL JET
365C, 365C L, 365C L MH, 374D L, 374F L, 583T, 587T, 621B, 621G, 623G, 627F, 627G, 631D, 637D, 651B, 657E, 657G, 735, 735B, 740, 740B, 770, 770G, 770G OEM, 824C, 824H, 824K, 825H, 825K, 826H, 826K, 98...
3V0036 TUBE AS
814B, 815B, 816B, 824C, 825C, 826C, 916, 926, 936, 936F, 950B, 950B/950E, 950F, 966D, 966F, 980C, 980F, 980F II, G936, IT18B, IT28, IT28B
2V7990 TUBE AS
814B, 815B, 826C, 916, 926, 936, 936F, 950B, 950F, 950F II, 966D, 966F, 980C, 980F, CS-643, G936, IT18, IT18B, IT28, IT28B
8N6364 TUBE AS-OIL
16G, 824C, 980C, 980F, 980G, PM-465, RM-350B, SM-350
6N9747 TUBE AS
824C, 826C, 980C, 980F, 980F II
3273936 TUBE AS
824C, 824H, 824K, 825H, 825K, 826H, 826K, 834K, 980H, 988K
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.