AVSPARE.COM
parts catalog

PLUNGER 9V9139 - Caterpillar



9V9139 PLUNGER Caterpillar parts 518, 528 PLUNGER
Rating:
60
Alternative (cross code) number:
CA9V9139
9V-9139
9V9139
Caterpillar 9V9139 PLUNGER
Weight: 0.20 pounds 0 kg.

Buy PLUNGER 9V9139 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SKIDDER,

Compatible equipment models: 9V9139:

WHEEL SKIDDER  518   528   Caterpillar
Number on catalog scheme: 18
 
  For full view, you need register

Information:


Remove bolts (1) and washers (2) . Remove covers (3) and (4) above the counterweight.
Illustration 2 g00504464
Typical ExampleNote: If there is too much tension or too little tension on the cable, the counterweight mounting bolts will be difficult to remove.
Fasten an appropriate rated cable (5) with shackles to the brackets on counterweight (6) . Use an appropriate lifting device in order to tension cable (5) .
Illustration 3 g00504374
Typical Example
Remove counterweight mounting bolts (7) and the spacers that secure the counterweight to the machine.
Remove the bolts, the washers and the plate which is located below the counterweight. The weight of the counterweight is approximately 11000 kg (24250 lb) .
Illustration 4 g00505133
Typical Example
Lift counterweight (6) enough so that there is no load on the retaining pins.
Illustration 5 g00505137
Typical Example
Separate counterweight (6) from the machine. Position counterweight (6) on suitable supports (8) .Installation Procedure
Unexpected machine movement can cause injury or death.To avoid possible machine movement, place the hydraulic activation control lever to the locked position and attach a Special Instruction, SEHS7332, "Do Not Operate" or similar warning tag to the control lever.
Personal injury or death can occur from a counterweight falling during removal or installation.Do not allow personnel under or around the counterweight during removal or installation.Make sure that the lifting device is in good condition and is capable of handling the weight of the counterweight.
Make certain personnel are clear of cable when there is a load on it. Cable can break and cause personal injury.
Illustration 6 g00505133
Typical Example
The weight of the counterweight 6 is approximately 11000 kg (24250 lb). Fasten an appropriate rated cable (5) with shackles to the brackets on counterweight (6) . Use an appropriate lifting device in order to lift the counterweight.
Illustration 7 g00504464
Lift counterweight (6) and place the counterweight in position on the machine.
Put 4C-5592 Anti-Seize Compound on the threads of counterweight mounting bolts (7) . Apply 4C-5592 Anti-Seize Compound between the bolt heads and the spacers.Note: If there is too little tension or too much tension on cable (5) , bolts (7) will be difficult to install.
Illustration 8 g00504374
Install counterweight mounting bolts (7) and the spacers that secure counterweight (6) to the machine.
Illustration 9 g00504464
Remove cable (5) with shackles and the lifting device from counterweight (6) .
Illustration 10 g00115284
(1) Bolt. (2) Washer. (3) Cover. (4) Cover.
Put covers (3) and (4) in position on the machine. Install bolts (1) and washer (2) in order to secure covers (3) and (4) to the machine.

Caterpillar parts catalog:

Caterpillar parts catalog
518 SKIDDER / POWER SHIFT / 94U00741-02499 (MACHINE) POWERED BY 3304 ENGINE
518 GRAPPLE SKIDDER / POWER SHIFT / 95U00154-03199 (MACHINE) POWERED BY 3304 ENGINE
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 SKIDDER / POWER SHIFT / 96C00001-UP (MACHINE) POWERED BY 3306 ENGINE
528 GRAPPLE SKIDDER / POWER SHIFT / 97C00001-UP (MACHINE) POWERED BY 3306 ENGINE


Parts plunger Caterpillar catalog:

1S2121 PLUNGER
120G, 12G, 130G, 140G, 14E, 14G, 14H, 14H NA, 16, 1693, 16G, 16H, 16H NA, 518, 518C, 572G, 583K, 594, 594H, 613, 613B, 621, 621B, 621E, 621F, 621G, 623B, 623E, 623F, 623G, 627, 627B, 627E, 627F, 627G,...
8M0874 PLUNGER AS-VALVE
16, 1693, 245, 3408, 3412, 3512, 518, 621, 621R, 631C, 637D, 641B, 651E, 657, 657B, 657E, 666, 769, 772, 777, 824, 824B, 834, 941, 950, 951B, 980C, 983, 988, 988B, 992, 992C, D10, D343, D346, D348, D3...
2S4015 PLUNGER ASSEM.
1673, 1673B, 1673C, 1674, 1676, 1693, 3304, 3306, 518, 528, 666, 814, 950, 966C, 980B, D334, D342C, D399, D4D, D8H
2S1022 PLUNGER
528, 54, 910, 931, 931B, 931C, D3, D342, D342C, D3C, D4E, D8H
4N1765 PLUNGER AND BARREL ASSEM.
12G, 130G, 1673C, 225, 235, 3160, 3208, 3304, 3306, 518, 627B, 637D, 639D, 941, 950, 977K, 980B, D4D, D5, D6C, D6D
6P8848 PLUNGER
528, 528B, 572G, 977K, D5, D5B, D6C, D6D, D6E, D6G2 LGP, D6G2 XL, D7G, D7G2, D8K
0858594 PLUNGER AS
320 L, 320N, 325, 325 L, 325 LN, 330, 330 FM L, E300B
0990368 PLUNGER AS
322, 322 FM L, 322 LN, E110B, E120B, E300B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.