AVSPARE.COM
parts catalog

SHEET-RH 9V9221 - Caterpillar



9V9221 SHEET-RH Caterpillar parts 824C, 980C, 980F, 980F II SHEET
Rating:
25
Alternative (cross code) number:
CA9V9221
9V-9221
9V9221
Caterpillar 9V9221 SHEET-RH
Weight: 8 pounds 3 kg.

Buy SHEET-RH 9V9221 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER, WHEEL LOADER,

Compatible equipment models: 9V9221:

WHEEL DOZER  824C  
WHEEL LOADER  980C   980F   980F II   Caterpillar
Number on catalog scheme: 15
 
  For full view, you need register

Information:

Removal Procedure
Start By:
Remove the exhaust elbow from the turbocharger. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03735740
Loosen hose clamps and disconnect the hose assemblies from turbocharger inlet (3) and from turbocharger outlet (14).
Remove banjo bolt (1) from tube assembly (6). Remove sealing washers (2) (not shown).
Remove banjo bolt (7) from tube assembly (6). Remove sealing washers (8) (not shown).
Remove tube assembly (6) from the turbocharger and the cylinder block.
Slide hose clamp (5) along hose assembly (4). Disconnect hose assembly (4) from the wastegate actuator.
Remove bolts (11) and bolts (13). Remove tube assembly (12) from the turbocharger.
Remove gasket (9) (not shown) and gasket (10) (not shown).
Illustration 2 g03735741
Remove nuts (17). Remove turbocharger (19) from exhaust manifold (15). Note: Do not use the actuator rod to lift the turbocharger.
Remove gasket (18) (not shown).
If necessary, remove the studs (16) (not shown) from turbocharger (19).

Caterpillar parts catalog:

Caterpillar parts catalog
824C TRACTOR 85X00001-01193 (MACHINE) POWERED BY 3406 ENGINE
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine
980F Wheel Loader 8CJ00001-UP (MACHINE) POWERED BY 3406 Engine


Parts sheet Caterpillar catalog:

9V9225 SHEET-LH
824C, 980C, 980F, 980F II
9V9220 SHEET-RH
824C, 980C, 980F, 980F II
8R4189 SHEET
980C, 980F, 980F II
6W8355 SHEET
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 980C, 980F, 980F II, 980G
6W5140 SHEET
824C, 826C, 980C, 980F
6W5225 SHEET
980C, 980F, 980F II
9V9226 SHEET-LH
824C, 980C, 980F, 980F II
9V9223 SHEET-RH
824C, 980C, 980F, 980F II
9V9227 SHEET-LH
824C, 980C, 980F, 980F II
7V2199 SHEET AS
824C, 825C, 826C, 980C, 980F, 980F II
5V3676 SHEET AS-RH
980C, 980F, 980F II
5V8192 SHEET
980C, 980F, 980F II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.