AVSPARE.COM
parts catalog

SHEET-RH 9V9223 - Caterpillar



9V9223 SHEET-RH Caterpillar parts 824C, 980C, 980F, 980F II SHEET
Rating:
8
Alternative (cross code) number:
CA9V9223
9V-9223
9V9223
Caterpillar 9V9223 SHEET-RH
Weight: 9 pounds 4 kg.

Buy SHEET-RH 9V9223 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER, WHEEL LOADER,

Compatible equipment models: 9V9223:

WHEEL DOZER  824C  
WHEEL LOADER  980C   980F   980F II   Caterpillar
Number on catalog scheme: 17
 
  For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02526997
Loosen the hose clamp and disconnect hose assembly from air outlet (4) from turbocharger (3).
Slide hose clamp along hose assembly (5). Disconnect hose assembly (5) from the wastegate actuator.
Loosen the allen head bolt on V-band clamp (2) and loosen the allen head bolt on V-band clamp (9) from elbow (1). Remove the V-band clamps from the elbow. Note: If the V-band clamps remain tight on the flanges, apply releasing fluid on the V-band clamps in order to assist removal. Lightly tap the allen head bolts on the V-band clamps with a soft faced hammer in order to assist removal. Do not use a prybar in order to remove V-band clamps.
Remove elbow (1) from turbocharger (3) and turbocharger (10).
Loosen allen head bolt on V-band clamp (6) on air duct (7) and loosen hose clamps (11). Note: If the V-band clamp remains tight on the flange, apply releasing fluid on the V-band clamps in order to assist removal. Lightly tap the allen head bolts on the V-band clamps with a soft faced hammer in order to assist removal. Do not use a prybar in order to remove V-band clamps.
Remove hose assembly (8) and air duct (7) from the outlet of turbocharger (10) and turbocharger (3).
Illustration 2 g03734673
Remove banjo bolt (13) from hose assembly (14).
Remove sealing washers (12) (not shown).
Disconnect hose assembly (14) from the connection on turbocharger (10). Plug and cap the turbocharger. Plug and cap the hose assembly.
Remove hose assembly (14).
Remove bolt (18) from the clip for tube assembly (17).
Remove bolts (16) and bolts (20) from tube assembly (17).
Remove tube assembly (17) from turbocharger (3) and the cylinder block.
Remove gasket (15) (not shown) and gasket (19) (not shown) from tube assembly (17). Note: Plug the oil drain tube assembly for the turbocharger. Plug the port on the turbocharger and the cylinder block.
Illustration 3 g02526999
Remove nuts (21) and nuts (25) from turbocharger (3). Note: Ensure that the weight of the turbocharger is supported as the nuts are loosened.
Remove turbocharger (3) from exhaust manifold (23).
Remove gasket (26) (not shown).
If necessary, remove studs (22) (not shown) from turbocharger (3).
If necessary, remove studs (24) from exhaust manifold (23).

Caterpillar parts catalog:

Caterpillar parts catalog
824C TRACTOR 85X00001-01193 (MACHINE) POWERED BY 3406 ENGINE
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine
980F Wheel Loader 8CJ00001-UP (MACHINE) POWERED BY 3406 Engine


Parts sheet Caterpillar catalog:

9V9226 SHEET-LH
824C, 980C, 980F, 980F II
9V9221 SHEET-RH
824C, 980C, 980F, 980F II
9V9225 SHEET-LH
824C, 980C, 980F, 980F II
9V9220 SHEET-RH
824C, 980C, 980F, 980F II
8R4189 SHEET
980C, 980F, 980F II
6W8355 SHEET
824C, 824G, 824G II, 824H, 825G, 825G II, 825H, 826C, 826G, 826G II, 826H, 980C, 980F, 980F II, 980G
9V9227 SHEET-LH
824C, 980C, 980F, 980F II
7V2199 SHEET AS
824C, 825C, 826C, 980C, 980F, 980F II
5V3676 SHEET AS-RH
980C, 980F, 980F II
5V8192 SHEET
980C, 980F, 980F II
5V3677 SHEET AS-LH
980C, 980F, 980F II
7V9534 SHEET AS-RH
824C, 980C, 980F
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.