AVSPARE.COM
parts catalog

FENDER AS 9V9224 - Caterpillar



9V9224 FENDER AS Caterpillar parts 824C, 980C FENDER
Rating:
22
Alternative (cross code) number:
CA9V9224
9V-9224
9V9224
Caterpillar 9V9224 FENDER AS
Weight: 140 pounds 63 kg.

Buy FENDER AS 9V9224 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER, WHEEL LOADER,

Compatible equipment models: 9V9224:

WHEEL DOZER  824C  
WHEEL LOADER  980C   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Strap Wrench 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g02475535
Place a suitable container below engine oil filter base (5) in order to catch any oil that might be spilled.
Use Tooling (A) to remove engine oil filter (5). Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct procedure.
Remove bolts (3).
Remove engine oil filter base (4).
Remove gasket (6).
If necessary, remove plug (1) from engine oil filter base (4). Remove O-ring seal (2) from plug (1). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g02475535
Clean engine oil filter base (4). Clean the gasket surfaces of the cylinder block.
If necessary, install new O-ring seals (2) to plugs (1). Install plugs (1) to engine oil filter base (4). Tighten the plugs to a torque of 12 N m (106 lb in).
Install bolts (3) to engine oil filter base (4).
Install a gasket (6) onto bolts (3). Install the assembly of the engine oil filter base to the cylinder block.
Tighten bolts (3) to a torque of 22 N m (195 lb in).
Install a new engine oil filter (5) and check the level of the engine lubricating oil. Refer to Operation and Maintenance Manual, "Engine Oil Level - Check" for the correct procedure.

Caterpillar parts catalog:

Caterpillar parts catalog
824C TRACTOR 85X01194-UP (MACHINE) POWERED BY 3406 ENGINE
980C Wheel Loader 63X06575-UP (MACHINE) POWERED BY 3406 Engine


Parts fender Caterpillar catalog:

6W8430 FENDER AS
824C, 980C, 980F, 980F II
6W7245 FENDER AS
824C, 980C, 980F, 980F II
6W9720 FENDER AS
980C, 980F, 980F II
9C4263 FENDER AS
980C, 980F, 980F II
9C4254 FENDER AS
980C, 980F, 980F II
9C4265 FENDER AS
980C, 980F, 980F II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.