AVSPARE.COM
parts catalog

LEVER GP-HAND CONTROL 9V9260 - Caterpillar



9V9260 LEVER GP-HAND CONTROL Caterpillar parts 508 LEVER
Rating:
52
Alternative (cross code) number:
CA9V9260
9V-9260
9V9260
Caterpillar 9V9260 LEVER GP-HAND CONTROL
Weight: 2 pounds 1 kg.

Buy LEVER GP-HAND CONTROL 9V9260 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SKIDDER,

Compatible equipment models: 9V9260:

WHEEL SKIDDER  508   Caterpillar
Number on catalog scheme: 2
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
(A)     8S-7640     Stand     2    
8S-7611 Tube     2    
8S-7615 Pin     2    
(B)     5W-5332     Lug     2    
(C)     8S-9906     Ratchet Puller     1    
Follow the recommended procedure for removal and installation of tires and or wheel assemblies.Ensure that the machine and tire and or wheel assembly are properly supported at all times.Improper procedures that are used to remove and install tires and or wheel assemblies can result in personal injury or death.
Put wood blocks in front of the front tires and behind the front tires of the machine.
Illustration 1 g00637455
Raise the rear of the machine until the rear tires are off of the floor. Position Tooling (A) under the rear axle, as shown. Adjust Tooling (A) in order to hold the rear tires of the machine off of the floor.
Rotate the upper structure in order to provide clearance for the removal and the installation of the rear tire and rim.
Illustration 2 g00636942
Completely deflate the tires.
Remove eight lug nuts (1) and the lockwashers that hold the front tire and rim in position. Do not remove the top nor the bottom lug nuts (1) at this time.
Illustration 3 g00636952
Remove two screws (2) .
Install Tooling (B), as shown. Remove the remaining two lug nuts (1) .
Illustration 4 g00637040
Fasten a lifting strap to tire ring (3). Tire ring (3) is used between the inner tire and rim and the outer tire and rim. Fasten an appropriate lifting device to the lifting strap. Apply slight lifting tension to tire ring (3) .
Position the forks of a lift truck beneath outer tire and rim (4), as shown. Fasten the outer tire and rim to the lift truck with Tooling (C). Remove the outer tire and rim from the front axle. The weight of the outer tire and rim is approximately 93 kg (205 lb).
Illustration 5 g00637050
Remove tire ring (3). The weight of the tire ring is approximately 32 kg (70 lb).
Illustration 6 g00637052
Fasten a lifting strap to inner tire and rim (5), as shown. Fasten an appropriate lifting device to the lifting strap. Remove the inner tire and rim from the front axle. The weight of the inner tire and rim is approximately 93 kg (205 lb).
Illustration 7 g00637061
Remove Tooling (B). Remove spacer ring (6) from each lug bolt (7) .

Caterpillar parts catalog:

Caterpillar parts catalog
508 SKIDDER AND GRAPPLE SKIDDER 2HD00001-UP (MACHINE) POWERED BY 3204 ENGINE


Parts lever Caterpillar catalog:

9T4112 LEVER GP
508, 916, G916, IT18B
4T2061 LEVER GP
508, 916, G916, IT18, IT18B
4W5734 LEVER AS
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 215, 215B, 225, 229, 229D, 235, 235B, 235C, 235D, 245, 3204, 330, 330...
7P3006 LEVER
508, 517, 527, 943, 953, 953C, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
6K0095 LEVER
508, 920, 930, 992, D6H, D6H II, D6H XL, D6H XR
8G1328 LEVER
508, 963, 973
7P2938 LEVER
508, 943, 953
4I1283 LEVER AS
325, 325 LN, 375 L
4I4209 LEVER
320 L, 325, 325 L, 325 LN, 330 L
1028046 LEVER AS
320 L, 322, 322 FM L, 322 LN, 325, 325 L
1003970 LEVER
325 L, 330, 350, 350 L, 375 L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.