AVSPARE.COM
parts catalog

CABLE AS 9V9262 - Caterpillar



9V9262 CABLE AS Caterpillar parts 508 CABLE
Rating:
53
Alternative (cross code) number:
CA9V9262
9V-9262
9V9262
Caterpillar 9V9262 CABLE AS
Weight: 1 pounds 0 kg.
Information:
LENGTH  1765  mm
MINIMUM BEND RADIUS  140  mm
TRAVEL  46  mm

Buy CABLE AS 9V9262 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SKIDDER,

Compatible equipment models: 9V9262:

WHEEL SKIDDER  508   Caterpillar
Number on catalog scheme: 8
 
  For full view, you need register

Information:


Illustration 1 g00575900
The swivel is shown without the hoses from the main control valve. (1) Swivel (2) Hose
Disconnect hose (2) from swivel (1). The hose is at the bottom and to the right side of the swivel.Note: Cap all lines, hoses and tubes in order to prevent foreign material from entering the hydraulic system.Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
Illustration 2 g00575902
Schematic of final hose routings and hookups (3) 1U-5230 Hand Hydraulic Pump (4) 8S-9355 Hose (5) 6V-3014 Hose Assembly (6) 6V-9843 Tee (7) 8C-6915 Bulkhead Adapter (8) 3B-6487 Coupling (9) 006-0210 Tee (10) 8T-0856 Pressure Gauge (11) Brake accumulator (12) 2D-7325 Pipe Tee (13) 6V-4143 Coupler (14) Travel brake valve (15) Hose (16) Hose
Illustration 3 g00655751
Remove hose (15) and hose (16) from the tee in the "BR" port of each travel brake valve.
Attach Tee (6) and Bulkhead Adapter (7) to the hose ends.
Illustration 4 g00625709
The frame is cutaway in order to view the travel brake valve. (14) Travel brake valve (17) "PPG" Gauge Port
Attach Hose Assembly (5) to gauge port "PPG" (17) on the back of travel brake valve (14) .
Illustration 5 g00576656
(18) Hose (19) Hose
Remove hoses (18) and (19) from both small motors.
Install Hose (4) in the place of hoses (18) and (19) .
Illustration 6 g00626482
(9) 006-0210 Tee (10) 8T-0856 Pressure Gauge (12) 2D-7325 Pipe Tee (20) 4M-5317 Terminal Bushings
Assemble the gauge and the fittings, as shown.
Refer to Illustration 2 in order to make sure that all of the hoses and connections are correct.
Apply 5170 kPa (750 psi) pressure to the brake ports with hydraulic hand pump (3) in order to release the parking brakes.
Remove the wheel chocks.
Tow the machine to a suitable maintenance area. Refer to Operation and Maintenance Manual, "Towing the Machine" for more information.
After the machine has been towed to the service area, return the brake circuit to original condition.

Caterpillar parts catalog:

Caterpillar parts catalog
508 SKIDDER AND GRAPPLE SKIDDER 2HD00001-UP (MACHINE) POWERED BY 3204 ENGINE


Parts cable Caterpillar catalog:

7Y3884 CABLE AS
320 L, 325, 325 L, 325 LN, 330 L
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.