ARMREST GP 2921301 - Caterpillar

src="//c1.a2109.com/cat2/se/senr/senr7408a00082.png"> 4W5105 (Ingersoll-Rand No. SS815R/4W5105); 4W5106 (Ingersoll-Rand No. SS815R/4W5106)
(1) Cover. Put clean engine oil on the threads of the bolts that hold cover and housing to the case at assembly.Tighten the bolts evenly in small increases until the torque is ... 80 N m (60 lb.ft.)(2) Torque for bolts ... 36 N m (28 lb.ft.)(3) Torque for bolt ... 78 N m (57 lb.ft.)(4) Torque for bolt that holds pinion ... 110 N m (80 lb.ft.)(5) Rotor clamp nut. Tighten nut until clearance between rear end plate and rotor is ... 0.03 to 0.08 mm (.001 to .003 in.)Check clearance again after the bolt for the clamp nut is tightened.(6) Torque for bolt that holds rotor ... 120 N m (90 lb.ft.)