8T8927 BOLT-BRACKET TO MOUNT Caterpillar parts
10 FT, 10-20B, 578, 583R, 583T, 587R, 587T, 633E, 651E, 657E, 657G, 8 FT, 8-16B, 824C, 825C, AP-1000B, AP-1055B, AP-1055D, AP-600D, AP-655D, AP-800, AP-800C, AP-800D, AP-900B, AP555E, AS2251, AS2252C,...
Rating:
Alternative (cross code) number:
CA8T8927
8T-8927
8T8927
CA8T8927
8T-8927
8T8927
Weight: 0.100 pounds 0 kg.
Information:
GRIP LENGTH
38.1
mm
HEAD HEIGHT
17.93
mm
HEX SIZE
38.1
mm
LENGTH
95.25
mm
MATERIAL
Steel 1035 MPa Min Tensile Strength Rc 33-39
THREAD SIZE
1.00-8
COATING/PLATING
Zinc-Dichromate Coating
ASPHALT PAVER, WHEEL SCRAPER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$20.71
01 Mar 2019
CATERPILLAR AFTERMARKET: CATERPILLAR AFT
Caterpillar HEX Cap Screw 8T8927 New
$10.39
17 May 2022
1.1023[0.50] Pounds
US: ProperBuy
8T8927 Hex Cap Screw Fits Caterpillar
TCP Warranty
TCP Warranty
Number on catalog scheme:
20
For full view, you need register
Compatible equipment models: 8T8927:
Information:
Removal Procedure
Start By:
Remove the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
Remove the other radiator top tank. Refer to Disassembly and Assembly, "Radiator Top Tank - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Illustration 1 g01391928
Remove hose (1) and bracket (2).
Illustration 2 g01391929
Loosen clamp (3). Remove bolts (4) and radiator top tank (5).
Illustration 3 g01391932
Remove seals (6).Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - P80 Rubber Lubricant -
Illustration 4 g01391932
Apply Tooling (A) to seals (6). Install seals (6).
Illustration 5 g01391929
Place radiator top tank (5) in position and install bolts (4). Tighten clamp (3).
Illustration 6 g01391928
Install bracket (2) and hose (1).Note: Install the expansion tank prior to the other radiator top tank.End By:
Install the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
Install the other radiator top tank. Refer to Disassembly and Assembly, "Radiator Top Tank - Remove and Install".
Start By:
Remove the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
Remove the other radiator top tank. Refer to Disassembly and Assembly, "Radiator Top Tank - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove filler cap slowly to relieve pressure only when engine is stopped and radiator cap is cool enough to touch with your bare hand.Cooling System Conditioner contains alkali. Avoid contact with skin and eyes.
Illustration 1 g01391928
Remove hose (1) and bracket (2).
Illustration 2 g01391929
Loosen clamp (3). Remove bolts (4) and radiator top tank (5).
Illustration 3 g01391932
Remove seals (6).Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - P80 Rubber Lubricant -
Illustration 4 g01391932
Apply Tooling (A) to seals (6). Install seals (6).
Illustration 5 g01391929
Place radiator top tank (5) in position and install bolts (4). Tighten clamp (3).
Illustration 6 g01391928
Install bracket (2) and hose (1).Note: Install the expansion tank prior to the other radiator top tank.End By:
Install the expansion tank. Refer to Disassembly and Assembly, "Expansion Tank - Remove and Install".
Install the other radiator top tank. Refer to Disassembly and Assembly, "Radiator Top Tank - Remove and Install".
Cat SIS web machinery list:
Parts bolt Caterpillar catalog:
16, 16G, 16H, 16H NA, AP-800
824G, 824G II, 844, 844H, 854G, 854K, CS-323, D10N, D10R, D11N, D11R
AE40 II, D10, D10N, D10R, D11N, D11R, D11T, D9G, D9N, D9R, D9T
508, 825C, 826C
D11N, D11R, D11T
D11N, D11R, D11T
D11N, D11R, D11T
D11N, D11R, D11T
D11N, D11R, D11T
825C, 825G, 825G II, 825H, 825K
D6C, D6D, D6G2 LGP, D6H, D6R, D6R II, D6R III, D6T, D6T LGP, D6T XL, D7G
7L9337
BOLT
D7H
D7H
0001614
BOLT( ON PLATFORM GP
943, 953, D4E
943, 953, D4E
7H3498
BOLT
973
973
3T9291
BOLT
589
589
1144698
BOLT
589, 836, D10R, D6R, D7R, D8R, D8R II, D9N, D9R
589, 836, D10R, D6R, D7R, D8R, D8R II, D9N, D9R
589, D11T, D8L, D9N, D9R
578, 583R, 583T, 587R, 587T, D7E, D7E LGP, D7H, D7R, D7R II, D7R XR, D8L, D8N, D8R, D8R II, D8T, PL83, PL87
578, 583R, 583T, 587R, 587T, D8L, D8N, D8R, D8R II, D8T, PL83, PL87