BOOM GP 3928335 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     1    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect" for the machine that is being serviced.
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Illustration 1 g00636622
Remove five bolts (1) and panel (2) from right side of machine.
Illustration 2 g00636623
Disconnect wires (3) from electric starting motor (4) .
Cut tie straps, as needed.Note: Put identification marks on wire assemblies for assembly purposes.
Disconnect cables (5) .
Illustration 3 g00636624
Attach Tooling (A) to electric starting motor (4) .
Attach a suitable hoist and lifting slings to Tooling (A) and the electric starting motor, as shown.
Illustration 4 g00636626
Remove three bolts (6) .
Use the hoist in order to remove electric starting motor (4). The weight of electric starting motor (4) is 36 kg (80 lb).
Illustration 5 g00636627
Remove gasket (7) .